Can Boot Zubuntu From Sd But Not From Cf Card Options

[drautzbug]

I followed cortez instruction to install zubuntu on a SD card and that worked okay (with the problem solutions from this forum). Then I got myself a 16 GB CF card and copied the rootfs there. But my Zaurus C760 won't boot from there. It goes

CODE

Probing /dev/mtdblock0
Probing /dev/mtdblock1
Probing /dev/mtdblock2
found  /dev/mtdblock2 (jffs2)
mount successful
/dev/mtdblock2 no kernel found, unmounting
Probing /dev/mtdblock3
Probing /dev/mmcblk0
Probing /dev/mmcblk0p1
found  /dev/mmcblk0p1 (vfat)
mount successful
/dev/mmcblk0p1 no kernel found, unmounting
No bootable device found

I assume the mmcblk message come from the SD card from which I flashed the kexec kernel, which was still in the device. But I would have expected that it probes /dev/hda1 /dev/hda2 and so forth. I have the feeling it does not even look at the CF card. Could it be that the kernel at http://www.zaurus.org.uk/cortez/ubuntu/dow...c7x0/zImage.bin simply does not expect CF cards?

The CF card itself seems okay. If I boot zubuntu from the SD card I can mount the CF card partitions (/dev/hda1 ...) no problem.
I also checked the md5 sums on zImage.bin and flashed it another time. Same result.

[drautzbug]

I believe the kexec kernel provided by omegamoon simply does not look at CF cards. I now flashed zImage-kexecboot-2.6.26-r12-c7x0.bin from Angström and it does find zubuntu on the CF card and starts to boot it . But then it stops with something like "waiting for root /dev/hda1" .

I assume this is because some module is not yet loaded at this stage. I will try to locate the module and put it into /etc/modules.

[apink]

I believe the kexec kernel provided by omegamoon simply does not look at CF cards. I now flashed zImage-kexecboot-2.6.26-r12-c7x0.bin from Angström and it does find zubuntu on the CF card and starts to boot it . But then it stops with something like "waiting for root /dev/hda1" .

I assume this is because some module is not yet loaded at this stage. I will try to locate the module and put it into /etc/modules.

Has this issue been resolved? I would like to multiboot from a cf card. In other words:

1) Has the kexec kernel provided by omegamoon been revised to recognize CF cards?
or
2) Does the Angström image get past "waiting for root /dev/hda1" with Zubuntu?

Thanks.

[drautzbug]

Picked up the trail recently. Still same problem, cannot even boot with zImage-kexecboot-2.6.26-r12-c7x0.bin at all. I wonder if I need a custom updater.sh.

Has anybody had any luck using kexecboot on a C760 with the rootfs on a CF card. Mine in 16MB, maybe that's a problem.

[ant]

>Has anybody had any luck using kexecboot on a C760 with the rootfs on a CF card. Mine in 16MB, maybe that's a problem.

Try this 2.6.26 kernel http://projects.linuxtogo.org/projects/zaurus/
(The 2.6.33-rc6 have still some minor issues)

Ant

[afxi]

I tried it with both 2.6.26 and the newest one, 2.6.34-rc4 from http://projects.linuxtogo.org/frs/?group_id=55 .
It didn't worked for me (4GB CF-Card), but my SD-Card (2GB) worked without any problems.
Then I put my SD into a SD to CF Converter and the result was this "Waiting for root device dev/hda1..."
Any solution?

[duo]

I know that zubuntu doesn't load the pxa2xx_cs driver at start, thus no love from the cf slot. Perhaps if you could get the cf driver to load sooner, it might work.