OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

12 Pages V  « < 8 9 10 11 12 >  
Reply to this topicStart new topic
> Zubuntu 1.0 Rc1, Start your downloads now
apink
post Feb 2 2009, 05:22 PM
Post #136





Group: Members
Posts: 106
Joined: 2-August 05
Member No.: 7,764



QUOTE(zthird @ Jan 25 2009, 01:47 PM) *
CL860 suspend issues:

issue 2: using the metal power button on the side of the unit to resume from suspend wakes the Z for half a second and then resuspends repeatable ad infinitum.
Using the keyboard "home" power button is the only way to wake the zaurus completely.

Otherwise great work! I will be donating as soon as I get some money !


fwiw: I had suspend issues similar to this on my c1000. They went away when I got a swap partition going.
Go to the top of the page
 
+Quote Post
svs57
post Feb 4 2009, 03:40 AM
Post #137





Group: Members
Posts: 108
Joined: 7-November 05
From: Russia
Member No.: 8,481



I read this topic closly but didn't find how make my CF cards work.
pxa2xx_cs, ide_cs, dtl1_cs modules loaded.
I did pccardctl insert and then pccardctl info
Nothing
lspcmcia show nothing.
I tried CF memory and CF Socket BT
Who can explain me how can I make CF work?
Thank you.
Go to the top of the page
 
+Quote Post
cortez
post Feb 4 2009, 03:48 AM
Post #138





Group: Members
Posts: 376
Joined: 18-March 04
From: The Netherlands
Member No.: 2,380



QUOTE(svs57 @ Feb 4 2009, 12:40 PM) *
I read this topic closly but didn't find how make my CF cards work.
pxa2xx_cs, ide_cs, dtl1_cs modules loaded.
I did pccardctl insert and then pccardctl info
Nothing
lspcmcia show nothing.
I tried CF memory and CF Socket BT
Who can explain me how can I make CF work?
Thank you.


Make sure you always mention what model you're using wink.gif
Go to the top of the page
 
+Quote Post
svs57
post Feb 4 2009, 07:08 AM
Post #139





Group: Members
Posts: 108
Joined: 7-November 05
From: Russia
Member No.: 8,481



QUOTE(cortez @ Feb 4 2009, 02:48 PM) *
QUOTE(svs57 @ Feb 4 2009, 12:40 PM) *
I read this topic closly but didn't find how make my CF cards work.
pxa2xx_cs, ide_cs, dtl1_cs modules loaded.
I did pccardctl insert and then pccardctl info
Nothing
lspcmcia show nothing.
I tried CF memory and CF Socket BT
Who can explain me how can I make CF work?
Thank you.


Make sure you always mention what model you're using wink.gif

Sorry smile.gif
SL-C750
PS
# rmmod pcmcia
# rmmod pxa2xx_cs
kernel BUG at mm/slab.c 590!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
.....
Internal error: Oops" 817 [#1] PREEMPT
...
Go to the top of the page
 
+Quote Post
svs57
post Feb 6 2009, 01:50 AM
Post #140





Group: Members
Posts: 108
Joined: 7-November 05
From: Russia
Member No.: 8,481



Where can I get 2.6.28 for sl-750 with kexec?
Thank you.
Go to the top of the page
 
+Quote Post
John Rose
post Feb 7 2009, 01:09 PM
Post #141





Group: Members
Posts: 3
Joined: 27-December 07
Member No.: 21,120



I have a Zaurus C=860.

I put on the first partition of the SD card (which has the first partition as ext2 - I did sudo mke2fs /dev/mmcblk0p1 after creating this partition - and the second partition as linux-swap) the files extracted (i..e. untarred & unzipped using my laptop's Ubuntu Extractor) from the zubuntu-desktop root file system. I then copied the extracted files from the appropriate root-addition archive to the extracted zubuntu-desktop directories on my laptop (i.e. the 3 files from the root-addition /boot directory to the zubuntu-desktop /boot directory and the 2.6.26 directory & its files from the root-addition /lib/modules directory to the zubuntu-desktop /lib/modules directory). I copied the resultant file structure to the SD card's first partition.

I flashed the multiboot kernel OK - using a CF card as I presumed that I wouldn't need to do it again. I got the Omegamoon screen showing the Zubuntu 1.0 distro (as per the instructions). I selected Zubuntu 1.0. The SD card was recognised there was a message 'VFS: Mounted root (ext2 filesystem) readonly' and a message stating 'Freeing init memory 84K). Then there was a message 'Warning: unable to open an initial console' and the Zaurus froze.

Help please!
Go to the top of the page
 
+Quote Post
apink
post Feb 7 2009, 03:51 PM
Post #142





Group: Members
Posts: 106
Joined: 2-August 05
Member No.: 7,764



QUOTE(cortez @ Dec 31 2008, 04:17 AM) *
By the way, people reporting that detection of the NAND partitions takes extremely long during booting, try erasing or re-flashing the NAND, this solves this problem.


Thanks Cortez for all that you have done with zubuntu. It is working well for me.

I tried re-flashing NAND (with the kexec kernel) and still get a long partition detection time. There are several parts to the NAND. Which would I erase if I wanted to shorten the NAND detection time?

Go to the top of the page
 
+Quote Post
qaz
post Feb 8 2009, 12:14 PM
Post #143





Group: Members
Posts: 26
Joined: 6-January 06
Member No.: 8,867



QUOTE(apink @ Feb 8 2009, 12:51 AM) *
QUOTE(cortez @ Dec 31 2008, 04:17 AM) *
By the way, people reporting that detection of the NAND partitions takes extremely long during booting, try erasing or re-flashing the NAND, this solves this problem.


Thanks Cortez for all that you have done with zubuntu. It is working well for me.

I tried re-flashing NAND (with the kexec kernel) and still get a long partition detection time. There are several parts to the NAND. Which would I erase if I wanted to shorten the NAND detection time?


I had the same problem with slow probing flash and solved it by installing mtd-utils_1.1.0+git-r1_arm.deb (from "Running Zubuntu from internal flash" blog post) and using command flash_eraseall /dev/mtd2 and /dev/mtd3 (default root and home partitions for Sharp ROM). I don't know if you use those partitions for anything, so take care smile.gif.

Go to the top of the page
 
+Quote Post
zthird
post Feb 8 2009, 02:57 PM
Post #144





Group: Members
Posts: 22
Joined: 13-May 06
Member No.: 9,851



I finally got sound working on the 860, bit hit and miss but...
changed the line in /etc/modules to
CODE
snd-soc-corgi

rebooted.
ran alsamixer and set the following
CODE
Master          85%
Master P        MUTE
Sidetone        0%
Mic Boos        MUTE
Playback        None
Capture         MUTE
ADC High        MUTE
Input Mu        Mic
Jack Fun        Headphone
Output M        UNMUTED
Output M        MUTE
Speaker         Off
Store DC        MUTE

where
the names are truncated as in the display, wich is why "Output M" appears twice
MUTE is [MM] and UNMUTED is [00] changed using the 'm' key
Use the up and down arrows to change all other functions/values
You can turn "Speaker" to "On" as required.
Go to the top of the page
 
+Quote Post
apink
post Feb 8 2009, 09:01 PM
Post #145





Group: Members
Posts: 106
Joined: 2-August 05
Member No.: 7,764



QUOTE(qaz @ Feb 8 2009, 12:14 PM) *
I had the same problem with slow probing flash and solved it by installing mtd-utils_1.1.0+git-r1_arm.deb (from "Running Zubuntu from internal flash" blog post) and using command flash_eraseall /dev/mtd2 and /dev/mtd3 (default root and home partitions for Sharp ROM). I don't know if you use those partitions for anything, so take care smile.gif.

Thanks. Reboots in no time.

newbie worry: in looking up flash_eraseall I saw something about maybe including the -j option. I didn't and hope this was ok.
Go to the top of the page
 
+Quote Post
Kirin
post Feb 21 2009, 07:01 PM
Post #146





Group: Members
Posts: 40
Joined: 20-July 05
Member No.: 7,641



anyone has ever tried to use Planex GW-CF11H ( a prism3 card) on Zubuntu?

Do I need any specific drivers and settings on my C3200?

I'm a newbie and any help would be great :-)
Go to the top of the page
 
+Quote Post
same
post Feb 24 2009, 05:07 AM
Post #147





Group: Members
Posts: 51
Joined: 29-October 07
From: barcelona
Member No.: 20,873



QUOTE(Kirin @ Feb 21 2009, 07:01 PM) *
anyone has ever tried to use Planex GW-CF11H ( a prism3 card) on Zubuntu?

Do I need any specific drivers and settings on my C3200?

I'm a newbie and any help would be great :-)


remove /etc/udev/rules.d/70-persistent-net.rules

in /etc/modprobe.d/blacklist
you should have
blacklist orinoco
blacklist orinoco_cs
blacklist hermes


then reboot, if iwconfig outputs an eth0 interface instead of a wlan0 interface
delete those modules: in /lib/modules/2.6.26-omegamoon.../kernel/drivers/net/wireless/orinoco* and then hermes*
and reboot
then iwconfig should return wlan0, if nothing is returned, do a modprobe hostap_cs if module is not present in lsmod
then just add to /etc/network/interfaces

allow-hotplug wlan0

#use this config if WEP
iface wlan0 inet dhcp
wireless_essid ACCESS_POINT_NAME
wireless_mode managed
wireless_key PASSWORD

#use this config if WPA
iface wlan0 inet static
wpa-ssid ACCESS_POINT_NAME
wpa-psk PASSWORD
address 10.0.0.20
netmask 255.255.255.0
gateway 10.0.0.1


use dhcp or static, just merge the configuration that fits you
then
ifdown wlan0
ifup wlan0


i don't know if firmware loads are required, i don't need it, my card fw are:
PRI: 1.1.0
STA: 1.7.4
Go to the top of the page
 
+Quote Post
Kirin
post Feb 25 2009, 09:17 AM
Post #148





Group: Members
Posts: 40
Joined: 20-July 05
Member No.: 7,641



Thanks same, finally I can get my 3200 wifi on with Zubuntu.

However, I notice it can't get online if the ssid is hidden (not broadcast)...

Anyway, does anyone ever able to get sound on 3100 or 3200?
Go to the top of the page
 
+Quote Post
Capn_Fish
post Feb 25 2009, 09:31 AM
Post #149





Group: Members
Posts: 2,350
Joined: 30-July 06
Member No.: 10,575



QUOTE(John Rose @ Feb 7 2009, 03:09 PM) *
I have a Zaurus C=860.

I put on the first partition of the SD card (which has the first partition as ext2 - I did sudo mke2fs /dev/mmcblk0p1 after creating this partition - and the second partition as linux-swap) the files extracted (i..e. untarred & unzipped using my laptop's Ubuntu Extractor) from the zubuntu-desktop root file system. I then copied the extracted files from the appropriate root-addition archive to the extracted zubuntu-desktop directories on my laptop (i.e. the 3 files from the root-addition /boot directory to the zubuntu-desktop /boot directory and the 2.6.26 directory & its files from the root-addition /lib/modules directory to the zubuntu-desktop /lib/modules directory). I copied the resultant file structure to the SD card's first partition.

I flashed the multiboot kernel OK - using a CF card as I presumed that I wouldn't need to do it again. I got the Omegamoon screen showing the Zubuntu 1.0 distro (as per the instructions). I selected Zubuntu 1.0. The SD card was recognised there was a message 'VFS: Mounted root (ext2 filesystem) readonly' and a message stating 'Freeing init memory 84K). Then there was a message 'Warning: unable to open an initial console' and the Zaurus froze.

Help please!


I'd try redownloading the files and extracting from the command line:

CODE
cd sd-mount-point
tar -xvpf zubuntu-tarball.tar.bz2

Go to the top of the page
 
+Quote Post
cortez
post Feb 25 2009, 09:42 AM
Post #150





Group: Members
Posts: 376
Joined: 18-March 04
From: The Netherlands
Member No.: 2,380



QUOTE(Kirin @ Feb 25 2009, 06:17 PM) *
Thanks same, finally I can get my 3200 wifi on with Zubuntu.

However, I notice it can't get online if the ssid is hidden (not broadcast)...

Anyway, does anyone ever able to get sound on 3100 or 3200?


To get sound going, run alsamixer and unmute all channels. This should do the trick
Go to the top of the page
 
+Quote Post

12 Pages V  « < 8 9 10 11 12 >
Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 19th December 2014 - 11:57 PM