OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Sl3100 'kernel Panic - Not Syncing: Vfs' Solution?
inshune
post Jan 16 2007, 09:15 PM
Post #1





Group: Members
Posts: 2
Joined: 16-January 07
Member No.: 14,002



I have zaurus 3100, in which I replaced microdrive with TRANSCEND CF 4GB.
Afrter this, even though qtopia, cacko and pdaxrom work well,
I get the OZ logo and below it: "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)"
per HRW's answer to the question for the person who mentioned the same issue like the above,
I noticed that Anyone who EXCHANGED internal microdrive with OTHER storage card NEED to provide
'cardctl ident' output to us so we could add it into ide-cs so kernel will know that yout 'umbaumba' cf card is ide.

I'd like to know where and how I can get the cardctl ident and what the 'umbaumba' cf card means.
And also, I'd like to know whether or not there is any one from 3000/3100/3200 users could install the CF card replacing microdrive
and how he/she could do it specifically. Thank you for your kind answer in advance.
Go to the top of the page
 
+Quote Post
pelrun
post Jan 16 2007, 10:18 PM
Post #2





Group: Members
Posts: 369
Joined: 6-September 04
From: Brisbane, Australia
Member No.: 4,488



You get the cardctl ident by opening a console window and typing "cardctl ident" into it smile.gif

Hrw only means "weird card brand I haven't seen yet" when he says "umbaumba" biggrin.gif
Go to the top of the page
 
+Quote Post
inshune
post Jan 19 2007, 06:02 AM
Post #3





Group: Members
Posts: 2
Joined: 16-January 07
Member No.: 14,002



QUOTE(pelrun @ Jan 16 2007, 10:18 PM)
You get the cardctl ident by opening a console window and typing "cardctl ident" into it smile.gif

Hrw only means "weird card brand I haven't seen yet" when he says  "umbaumba" biggrin.gif
*


When typing 'cardctl ident', it says that card is mounted on the socket number 1.
I'm wondering if the cardctl ident verifies only whether or not the card is insterted.

I'd like to know whether or not OZ(spitz) can be installed
when the microdrive is replaced with TRANSCEND CF 4GB.
And if it can be so, I also would like to know how to install OZ(spitz) in detail.

And also, I'd like to know how to make partitions after installation because
It shows that it 'could not create directory', even though I followed the below instruction.

Partitioning

CODE
First 1 ~ +150M
Second [hit enter] ~ +40M
Third [hit enter] ~ Enter


Thanks for your kind reply again in advance.
Go to the top of the page
 
+Quote Post
koen
post Jan 19 2007, 06:48 AM
Post #4





Group: Members
Posts: 1,014
Joined: 4-January 05
From: Enschede, The Netherlands
Member No.: 6,107



QUOTE(inshune @ Jan 19 2007, 02:02 PM)
I'd like to know whether or not OZ(spitz) can be installed
*


It can be installed after you post the complete output of 'cardctl ident' and 'cardctl info'.
Go to the top of the page
 
+Quote Post
soapfish
post Mar 25 2007, 01:14 AM
Post #5





Group: Members
Posts: 1
Joined: 10-March 05
Member No.: 6,609



QUOTE(koen @ Jan 19 2007, 06:48 AM)
QUOTE(inshune @ Jan 19 2007, 02:02 PM)
I'd like to know whether or not OZ(spitz) can be installed
*


It can be installed after you post the complete output of 'cardctl ident' and 'cardctl info'.
*




I have the same problem and here's the info from 'cardctl ident'

Socket 1:
product info: "KINGSTON", "CF8GB", ""
manfid: 0x000a, 0x0000
function: 4 (fixed disk)

Do I simply post it here or I have to post it elsewhere?
Go to the top of the page
 
+Quote Post
koen
post Mar 25 2007, 02:17 AM
Post #6





Group: Members
Posts: 1,014
Joined: 4-January 05
From: Enschede, The Netherlands
Member No.: 6,107



QUOTE(soapfish @ Mar 25 2007, 09:14 AM)
QUOTE(koen @ Jan 19 2007, 06:48 AM)
QUOTE(inshune @ Jan 19 2007, 02:02 PM)
I'd like to know whether or not OZ(spitz) can be installed
*


It can be installed after you post the complete output of 'cardctl ident' and 'cardctl info'.
*




I have the same problem and here's the info from 'cardctl ident'

Socket 1:
product info: "KINGSTON", "CF8GB", ""
manfid: 0x000a, 0x0000
function: 4 (fixed disk)

Do I simply post it here or I have to post it elsewhere?
*



bugs.openembedded.org would be nice
Go to the top of the page
 
+Quote Post
rolf
post Jul 8 2007, 03:11 AM
Post #7





Group: Members
Posts: 108
Joined: 5-October 04
Member No.: 4,884



QUOTE(koen @ Mar 25 2007, 12:17 PM)
QUOTE(soapfish @ Mar 25 2007, 09:14 AM)
Do I simply post it here or I have to post it elsewhere?


bugs.openembedded.org would be nice

http://bugs.openembedded.org/show_bug.cgi?id=2045
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 31st October 2014 - 11:25 AM