OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> securid and afterdial connection to ras server., is it possible on the zaurus.
zbones
post Oct 10 2004, 03:13 AM
Post #1





Group: Members
Posts: 459
Joined: 9-December 03
From: Leeds, England
Member No.: 1,114



Hello, I have to use a securid card (constantly generates a code) to log in to our ras server at work.

On the laptop the afterdial terminal option is enabled, I enter no password/username click dial and a window pops up for me to enter the username and generated password.

I cannot find a way of using an afterdial terminal on the zaurus.

I have tried putting the securid password in before I dial but this doesn't work, possibly because the password has changed by the time it connects.

I am connecting via bluetooth which works for internet through gprs ans also works when I dial up a gsm internet provider.

Anyone got this working?
Go to the top of the page
 
+Quote Post
iamasmith
post Oct 10 2004, 05:18 AM
Post #2





Group: Members
Posts: 1,248
Joined: 6-July 04
Member No.: 3,928



Can't think of a way offhand, although you could try waiting until your fob shows a complete bank of symbols then immediately entering the passcode/dialing.

This way you should get a full minute before the code changes.

BTW: It ain't going to help things if your fob goes into newpin/next token mode though.
Go to the top of the page
 
+Quote Post
zbones
post Oct 11 2004, 12:07 AM
Post #3





Group: Members
Posts: 459
Joined: 9-December 03
From: Leeds, England
Member No.: 1,114



I've just checked the logs and it seems it's not even getting to the password stage, it appears to be getting stuck at sending my username (changed in the logs to zbones)

Also a minute isn't quite long enough as the modem needs to connect first.


CODE
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (ATZ^M)
expect (OK)
ATZ^M^M
OK
-- got it

send (ATDPxxxxxxxxxxx^M)
expect (CONNECT)
^M
ATDPxxxxxxxxxxxx^M^M
CONNECT
-- got it

Serial connection established.
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ec0cd56> <pcomp> <accomp>]
Timeout 0x20084bc:0x203b440 in 3 seconds.
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x2ec0cd56> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ec0cd56> <pcomp> <accomp>]
Timeout 0x20084bc:0x203b440 in 3 seconds.
rcvd [LCP ConfReq id=0x2 <mru 1514> <asyncmap 0x0> <auth chap MD5> <magic 0x1113e2d3> <pcomp> <accomp> <mrru 1514> <endpoint [null]>]
lcp_reqci: returning CONFREJ.
sent [LCP ConfRej id=0x2 <mrru 1514>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x2ec0cd56> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x3 <mru 1514> <asyncmap 0x0> <auth chap MD5> <magic 0x1113e2d3> <pcomp> <accomp>]
lcp_reqci: returning CONFACK.
sent [LCP ConfAck id=0x3 <mru 1514> <asyncmap 0x0> <auth chap MD5> <magic 0x1113e2d3> <pcomp> <accomp>]
Untimeout 0x20084bc:0x203b440.
rcvd [CHAP Challenge id=0x4 <2d6c8a16461cba7d746739b8e9a431b7>, name = "hiper"]
ChapReceiveChallenge: using 'BLUETOOTH1xxxxxxxxxx' as remote name
sent [CHAP Response id=0x4 <09fe10d1f6a2297d36d55ede5f46914f>, name = "zbones"]
Timeout 0x200f698:0x203b710 in 3 seconds.
sent [CHAP Response id=0x4 <09fe10d1f6a2297d36d55ede5f46914f>, name = "zbones"]
Timeout 0x200f698:0x203b710 in 3 seconds.
sent [CHAP Response id=0x4 <09fe10d1f6a2297d36d55ede5f46914f>, name = "zbones"]
Timeout 0x200f698:0x203b710 in 3 seconds.
rcvd [CHAP Failure id=0x4 "-l\212\026F\034\272}tg9\270\351\2441\267"]
Untimeout 0x200f698:0x203b710.
Remote message: -lM-^J^VF^\M-:}tg9M-8M-iM-$1M-7
CHAP authentication failed
Untimeout 0x200f698:0x203b710.
sent [LCP TermReq id=0x2 "Failed to authenticate ourselves to peer"]
Timeout 0x20084bc:0x203b440 in 3 seconds.
rcvd [LCP TermReq id=0x5]
sent [LCP TermAck id=0x5]
Terminating on signal 15.
sent [LCP TermReq id=0x3 "User request"]
Timeout 0x20084bc:0x203b440 in 3 seconds.
Connection terminated.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 26th November 2014 - 04:15 PM