 Is Pdaxrom What I Need For Rfid Tools?, Trying to develop RFID tools for my Z |
OESF Forums > Distros, Development, and Model Specific Forums > Distro Support and Discussion > pdaXrom  |
 Aug 23 2006, 03:57 PM
Post
#1
|
|
|
Group: Members Posts: 18 Joined: 20-August 06 Member No.: 10,879  |
I want to use my Z to communicate with RFID tags. I have a 13.56Mhz reader (CF) it uses /dev/ttyS0 on a nomal linux box. Not sure how I will get that working on my Z...
I have pdaxrom flashed on my C700 now. However, I'm really keen on getting a chrooted debian environment if that's what I need? At this point I'm not sure so I'll ask the experts. I need the following on my Z. GTK 2 PERL RUBY PYTHON Questions: Would pocketworkstation work with PdaXrom? Does Debian use the PdaXrom X server or run its on? How will this run on the C700? Final Question: Am I going about this all wrong? Do I need to put debian on my C700 to achieve getting the packages above? My goal is to use the PDA to develop RFID applications. I have an ACG reader (CF2) card and need the dev capabilities above. CHeers!!!! JP |
 |
 
|
|
Aug 24 2006, 04:28 AM
Post
#2
|
|
|
Group: Members Posts: 388 Joined: 7-December 03 Member No.: 1,058 |
QUOTE(packetfocus @ Aug 23 2006, 03:57 PM) I want to use my Z to communicate with RFID tags. I have a 13.56Mhz reader (CF) it uses /dev/ttyS0 on a nomal linux box. Not sure how I will get that working on my Z... I have pdaxrom flashed on my C700 now. However, I'm really keen on getting a chrooted debian environment if that's what I need? At this point I'm not sure so I'll ask the experts. I need the following on my Z. GTK 2 PERL RUBY PYTHON Questions: Would pocketworkstation work with PdaXrom? Does Debian use the PdaXrom X server or run its on? How will this run on the C700? Final Question: Am I going about this all wrong? Do I need to put debian on my C700 to achieve getting the packages above? My goal is to use the PDA to develop RFID applications. I have an ACG reader (CF2) card and need the dev capabilities above. CHeers!!!! JP  this CF card works in zaurus as serial CF card? |
|
|
|
|
Aug 24 2006, 05:21 PM
Post
#3
|
|
|
Group: Members Posts: 18 Joined: 20-August 06 Member No.: 10,879 |
QUOTE(sashz @ Aug 24 2006, 11:28 PM) this CF card works in zaurus as serial CF card? I suppose so. I haven't gotten it to work yet  I know a standard linux box reconizes it as /dev/ttyS0 or ttyS1 Here are the specs. ACG says it doesnt require any drivers. RF Transmit Frequency 13.56MHz Supported Standards ISO14443A, ISO14443B Supported Tag-ICs MIFARE® Standard MIFARE® 4k MIFARE® ProX MIFARE® Ultralight MIFARE® DESFIRE SmartMX SLE 55Rxx SLE 66CL160S SLE 66CLX320P SR176 SRIX4K ISO14443A Tags ISO14443B Tags Jewel Tag (IRT0302B11 KSW DIY Eng. Sample) Sharp B ASK GTML2ISO Communications Interface CF Card Interface Communications Protocol Specific ASCII or Binary Protocol Communications Parameter 9600 Bit/s to 115kBit/s, 8, n, 1 Firmware Boot-Loader Yes S/W Driver Not required Power Supply Via CF Card Interface Current Consumption Typ. 200mA in active mode max. 310 mA <65 mA Antenna off <1μA in disconnected mode Reading distance Up to 60 mm / 2,36 Inch, depending on tag RF Transmission Speed Up to 848 kBit/s Antenna Integrated Size (LxWxH) 43.0x84.0x7.0mm / 1.69x3.31x0.02Inch Weight 21g ± 10% / 0.046 lb ± 10% Operating Temperature 0°C to +70°C / +32F to +158F Storage Temperature -20°C to +85°C / -4F to +185F Firmware Version Ver. 2.1 Approvals EN 300-330, CE |
|
|
|
|
Aug 24 2006, 06:48 PM
Post
#4
|
|
|
Group: Members Posts: 369 Joined: 6-September 04 From: Brisbane, Australia Member No.: 4,488 |
You don't need debian to get those packages - I have gtk, perl and python on my Z right now. I expect a Ruby package is available as well.
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 24th May 2013 - 05:00 AM |