 Wpa Not Working With Rc12 |
OESF Forums > Distros, Development, and Model Specific Forums > Distro Support and Discussion > pdaXrom  |
  Nov 27 2005, 08:41 AM
Post
#1
|
|
 Group: Members Posts: 11 Joined: 19-June 03 From: Hannover Member No.: 177  |
Hi,
I both tried wpa_supplicant 0.38 and 0.39 from unstable - with no success I always got linkstatus=6 (association failed) Has anybody a solution for that? I tried wpa-psk as described in the wpa...conf.example.... Regards Uwe |
 |
 
|
|
Nov 27 2005, 10:22 AM
Post
#2
|
|
 Group: Members Posts: 704 Joined: 9-October 03 From: Denmark Member No.: 20 |
I think you need the Hostap drivers :-)
|
|
|
|
|
Nov 27 2005, 11:35 AM
Post
#3
|
|
|
Group: Members Posts: 11 Joined: 19-June 03 From: Hannover Member No.: 177 |
QUOTE(Laze @ Nov 27 2005, 07:22 PM) I think you need the Hostap drivers :-)  It doesn't matter - both orinoco and hostap drivers fail. I just upgraded my Linksys WCF12 to the latest PRISM firmware 1.1.0/1.8.4 - same result :-( Connecting with no encryption works well. Is there anyone who has a Linksys WCF12 and could connect with WPA to his access point? Thanks for every help. I'm a little bit frustrated... Regards, Uwe |
|
|
|
|
Nov 27 2005, 01:13 PM
Post
#4
|
|
|
Group: Members Posts: 11 Joined: 19-June 03 From: Hannover Member No.: 177 |
It seems that even with the latest firmware update my prism III based Linksys WCF12 doesn't
support WPA. So I looked for a WLAN CF Card with WPA support and couldn't find one. Perhaps they don't exist... Regards, Uwe |
|
|
|
|
Nov 28 2005, 10:31 AM
Post
#5
|
|
|
Group: Members Posts: 11 Joined: 19-June 03 From: Hannover Member No.: 177 |
I got it working now - but only with Cacko 1.23.
I followed the instructions at OESF-Cacko Board and got WPA-PSK working with RC12. Before that I flashed my firmware of the WCF12 (now: station V1.1.1 / primary V1.8.4) - you can find the flash instructions in the thread above, too. Type "hostap_diag wifi0" to look at the firmware versions. And, yes - I use hostap in Cacko. It connects fine with my WRT54GS. Perhaps anyone gets it working in pdaxrom - I'll try it again with RC>RC12 - because the ROM it's worth... Thanks for all the hints (and the audience  )Uwe |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th May 2013 - 07:04 PM |