Cacko FAQ and Bugz Database are available Options

[maslovsky]

Based on 1.22 ROM thread, I've set up initial verison of Cacko ROM 1.22 FAQ. Please, visit it at: http://cacko.biz/cacko/faq

Comments are welcome.

[ev1l]

here is the bugDB

might be a good idea to put ncurses 4 in the cacko feed if you recommend it.
that last QA is a bit confusing though. You open th equestion with joe, and the answer is 90% about vim
Disabling dimming seems to make the screen-shutoff problem come back.

[maslovsky]

This FAQ is far from being complete. I just wanted to make sure that we have some information about all the issues we found in 1.22.

[_Psycho]

Its quite good if you ask me

[ev1l]

This FAQ is far from being complete. I just wanted to make sure that we have some information about all the issues we found in 1.22.

Wasn't meant as a complaint. Just pointing things out

[\Kritikal\]

I noticed the page was slow to load as well as having a Geocities/Yahoo style advert in the upper right corner. I can provide space on my domain, you'd get a login of course, so that we can enjoy an advert free site. Plus, I love giving back and since I don't know Linux enough to contribute anything technical, I'd love to help out in any other way I can. Send me a PM if you're interested!

[mrente07]

Thanks a lot for the really nice ROM. I used the previous version and I like the newone.

I 'm using a CFU USB adapter with some USB memory sticks and need some help. With Cacko V1.21 I hadn't any problems to use them. But with V1.22 I couldn't connect to any sticks anymore. The CFU adapter will be detected but no sticks. I looked at the FAQ page, but I couldn't find some information about the hotplug system.

Can you give me a hint how this should work with CFU and USB sticks or where I can more details to solve my problem?

Thanks, regards

[maslovsky]

Thanks a lot for the really nice ROM.  I used the previous version and I like the newone.

I 'm using a CFU USB adapter with some USB memory sticks and need some help. With Cacko V1.21 I hadn't any problems to use them. But with V1.22 I couldn't connect to any sticks anymore.  The CFU adapter will be detected but no sticks. I looked at the FAQ page, but I couldn't find some information about the hotplug system.

Can you give me a hint how this should work with CFU and USB sticks or where I can more details to solve my problem?

Thanks, regards

Do you mean Ratoc USB Host? It should be working, I will check.

[mrente07]

Do you mean Ratoc USB Host? It should be working, I will check.

Yes, it is the CFU1 USB host cf card of Ratoc systems. I tried the new patch V1.22A also but no changes. Could I check anything else for you additionally?

[maslovsky]

Do you mean Ratoc USB Host? It should be working, I will check.

Yes, it is the CFU1 USB host cf card of Ratoc systems. I tried the new patch V1.22A also but no changes. Could I check anything else for you additionally?

Today checked my USB Host card with two card readers and one USB Stick - all worked fine.

Try to start syslog (/etc/rc.d/init.d/syslog start) and see what messages appear (tail -f /var/log/messages) when you insert your USB stick.

[mrente07]

Try to start syslog (/etc/rc.d/init.d/syslog start) and see what messages appear (tail -f /var/log/messages) when you insert your USB stick.

Thanks for your checks. I have done what you proposed and I got following messages ....
.... by inserting the USB stick:
hub.c: USB new device connect on bus1/1, assigned device number 4
usb.c: USB device 4 (vend/prod 0xea0/0x2168) is not claimed by any active driver
/etc/hotplug/usb/.agent: Setup for USB product ea0/2168/200

.... by removing the USB stick:
hub.c: USB disconnect on device 4

I hope, this will help.

[Lutz-W.]

Try to start syslog (/etc/rc.d/init.d/syslog start) and see what messages appear (tail -f /var/log/messages) when you insert your USB stick.

Hi maslovsky,

I use Cacko 1.22 Lite and have the same problem with the with the RATOC CFU1-Card and a USB stick. I found the following in /var/log/messages:

Feb 7 20:03:07 zaurus daemon.info cardmgr[164]: initializing socket 0
Feb 7 20:03:07 zaurus daemon.info cardmgr[164]: socket 0: RATOC USB HOST CF+ Card
Feb 7 20:03:07 zaurus daemon.info cardmgr[164]: executing: 'modprobe usbcore'
Feb 7 20:03:07 zaurus syslog.info klogd: usb.c: registered new driver usbdevfs
Feb 7 20:03:07 zaurus syslog.info klogd: usb.c: registered new driver hub
Feb 7 20:03:07 zaurus daemon.info cardmgr[164]: executing: 'modprobe hc_sl811'
Feb 7 20:03:07 zaurus daemon.info cardmgr[164]: executing: 'modprobe sl811_cs'
Feb 7 20:03:07 zaurus syslog.info klogd: cf_usb0: index 0x04: Vcc 3.3, irq 39, io 0xf6000000-0xf6000007
Feb 7 20:03:07 zaurus syslog.info klogd: usb.c: new USB bus registered, assigned bus number 1
Feb 7 20:03:07 zaurus syslog.info klogd: hc_sl811.c: USB SL811 at f6000000,f6000001, IRQ 39
Feb 7 20:03:07 zaurus syslog.info klogd: hub.c: USB hub found
Feb 7 20:03:07 zaurus syslog.info klogd: hub.c: 1 port detected
Feb 7 20:03:08 zaurus daemon.info cardmgr[164]: executing: './usb-host start cf_usb0'
Feb 7 20:03:08 zaurus user.notice /etc/hotplug/usb.agent: Setup for USB product 0/0/0
Feb 7 20:03:13 zaurus syslog.info klogd: hub.c: USB new device connect on bus1/1, assigned device number 2
Feb 7 20:03:13 zaurus syslog.info klogd: hub.c: USB hub found
Feb 7 20:03:13 zaurus syslog.info klogd: hub.c: 1 port detected
Feb 7 20:03:13 zaurus syslog.info klogd: hub.c: USB new device connect on bus1/1/1, assigned device number 3
Feb 7 20:03:13 zaurus syslog.warn klogd: usb.c: USB device 3 (vend/prod 0x67b/0x2517) is not claimed by any active driver.
Feb 7 20:03:14 zaurus user.notice /etc/hotplug/usb.agent: Setup for USB product 67b/2515/100
Feb 7 20:03:14 zaurus user.notice /etc/hotplug/usb.agent: Setup for USB product 67b/2517/100

On /proc there is no scsi file or directory.

I hope also, this will help.
Lutz

[stupkid]

Does running "sudo modprobe usb-storage" do anything for you? I see that the scsi modules and the usb-storage module is there. So all the necessary kernel modules should be there.

[Lutz-W.]

"sudo modprobe usb-storage"

Okay! That is it.
It functions again.

Thanks!
Lutz

P.S. Stupkid: What makes BestCrypt?

[maslovsky]

Looks like your USB stick don't have an enry in hotplg configuration file. Try to copy /etc/hotplug/usb.distmap from a PC wth a recent liux distro installed. That should bind you class/vendor etc id with usb-storage hotplug scripts and load modules automaticaly.