Upgrading From Last Pdaxrom To Zubuntu Problems Options

[stoker]

Hello,

I have a zaurus 3100 with last version of pdaxrom ( 1.1.0r198 for Zaurus C1000, C3100/C3200) and I try to update to Zubuntu 1.0 RC1 but update not work


I delete all files from SD, copy files from Zubutu in SD and follow instructions from zubutu web page
http://www.omegamoon.com/blog/static.php?page=ZaurusUbuntu

CODE

1. Download the kernel for your device from one of the options below, and put the kernel together with the generic updater.sh onto a FAT formatted SD memory card. You can check the integrity of the downloaded files with the md5sum <filename> command. The checksum should match the hash value on the right. Make sure there isn't floating an initrd.bin file around on the SD card!

  # SL-C3000, SL-C3100 and SL-C3200
        MD5: cd016351fa274668341d6eea9f133a64
  # SL-C1000
        MD5: 2000ec7b019750ee280150f3ad8a73c8
  # SL-C700, SL-C750, SL-C760, SL-C860
        MD5: 6d4437c6cd6cb9335a1780ee0f0e922d


2. Remove battery and power adapter cable
3. Wait for 5 seconds
4. Replace battery, close and lock battery cover
5. Attach power adapter cable
6. Keep OK button pressed while pressing on/off switch
7. From the Japanese menu, choose option 4 (Update), then 2 (SD) and finally Y

but start the pdaxrom emergency system, not have a Japanese menu

thanks for your help!!

[cortez]

It looks like you're using uboot, which can overwrite the sharp bootloader. If so, download a NAND backup (trisoft has one), remove battery, remove external power, press (and keep holding down) Fn+D+M and insert the external power (while still holding down Fn+D+M). Then finally restore the NAND using the downloaded backup.

If you've done that, you've restored your device to factory default and the procedure should work as described.

[Capn_Fish]

http://www.oesf.org/forum/index.php?showtopic=24199

The cure-all thread!

It says the same thing, but in different words

[stoker]

It looks like you're using uboot, which can overwrite the sharp bootloader. If so, download a NAND backup (trisoft has one), remove battery, remove external power, press (and keep holding down) Fn+D+M and insert the external power (while still holding down Fn+D+M). Then finally restore the NAND using the downloaded backup.

If you've done that, you've restored your device to factory default and the procedure should work as described.

thanks cortez, your zubuntu works fine...

how I install a pdaXrom-1.1.0r198-Kathrin-akita-current in same SD?
I have 3 partitions and one swap in my SD (2Gb)

The pdaXrom-1.1.0r198-Kathrin-akita-current have 3 files:
-rw-r--r-- 1 saba saba 723 2007-03-27 15:38 autoboot.sh
-rw-r--r-- 1 saba saba 1,3M 2007-04-13 01:43 kernel.img
-rw-r--r-- 1 saba saba 46M 2007-04-13 01:43 rootfs.img

create boot directory in root partition
rename rootfs.img to zImage.bin and copy to /boot dir
Create a file named kernel-cmdline containing the kernel startup command line

what is kernel startup command line ?

[cortez]

@stoker: See my reply in this post

Cheers,
cortez