OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Zaurus As Wifi-to-gsm Gateway, has anyone succeed ?
jpmatrix
post Oct 8 2007, 10:55 AM
Post #1





Group: Members
Posts: 1,019
Joined: 15-February 05
From: France
Member No.: 6,477



hello
here's what i'd like to do with the Zaurus :

http://web.archive.org/web/20070428000520/...m/node/view/192

my main goal is to provide anywhere-dialup to my PSP which is only wifi : PSP-->wifi-->Zaurus-->BT_dialup-->GSM-->internet

any success ?

ps: i'd like to do that with my debian on the zaurus wink.gif
Go to the top of the page
 
+Quote Post
speculatrix
post Oct 8 2007, 02:42 PM
Post #2





Group: Admin
Posts: 3,281
Joined: 29-July 04
From: Cambridge, England
Member No.: 4,149



QUOTE(jpmatrix @ Oct 8 2007, 07:55 PM) *
here's what i'd like to do with the Zaurus :
http://web.archive.org/web/20070428000520/...m/node/view/192


well, it looks as if the article referenced pretty much tells you all you need to know.

1/ on zaurus, set up ppp dial up networking using a gsm/gprs phone connected via serial or irda or usb
2/ turn on IP forwarding
3/ use masquerading outbound on ppp0
4/ install bind/named
5/ install dhcp daemons on zaurus, set it up bound to wlan network, telling any dh clients to use Z as gateway,
6/ use ad-hoc networking on wireless lan

should be fairly straightforward
Go to the top of the page
 
+Quote Post
jpmatrix
post Oct 8 2007, 10:13 PM
Post #3





Group: Members
Posts: 1,019
Joined: 15-February 05
From: France
Member No.: 6,477



QUOTE(speculatrix @ Oct 9 2007, 12:42 AM) *
QUOTE(jpmatrix @ Oct 8 2007, 07:55 PM) *
here's what i'd like to do with the Zaurus :
http://web.archive.org/web/20070428000520/...m/node/view/192


well, it looks as if the article referenced pretty much tells you all you need to know.

1/ on zaurus, set up ppp dial up networking using a gsm/gprs phone connected via serial or irda or usb
2/ turn on IP forwarding
3/ use masquerading outbound on ppp0
4/ install bind/named
5/ install dhcp daemons on zaurus, set it up bound to wlan network, telling any dh clients to use Z as gateway,
6/ use ad-hoc networking on wireless lan

should be fairly straightforward


ok! i'll try and let you know if i need a network specialist wink.gif
Go to the top of the page
 
+Quote Post
jpmatrix
post Oct 9 2007, 10:18 AM
Post #4





Group: Members
Posts: 1,019
Joined: 15-February 05
From: France
Member No.: 6,477



first problem : i cannot put my asus wl110 cf card into master mode:
"operation not supported" ...
and i cannot go any further..........
Go to the top of the page
 
+Quote Post
speculatrix
post Oct 10 2007, 04:03 AM
Post #5





Group: Admin
Posts: 3,281
Joined: 29-July 04
From: Cambridge, England
Member No.: 4,149



QUOTE(jpmatrix @ Oct 9 2007, 07:18 PM) *
first problem : i cannot put my asus wl110 cf card into master mode:
"operation not supported" ...
and i cannot go any further..........


see point 6 I made above
Go to the top of the page
 
+Quote Post
Da_Blitz
post Oct 10 2007, 04:15 AM
Post #6





Group: Members
Posts: 1,565
Joined: 7-April 05
From: Sydney, Australia
Member No.: 6,806



if you have a wince mobile then look out for the internet sharing program, connecting to that over bluetooth is as simple as

pand -c <bt mac>
/sbin/dhclient bnep0

its great if you dont want to fiddle with dial strings
Go to the top of the page
 
+Quote Post
jpmatrix
post Oct 10 2007, 07:10 AM
Post #7





Group: Members
Posts: 1,019
Joined: 15-February 05
From: France
Member No.: 6,477



QUOTE(speculatrix @ Oct 10 2007, 02:03 PM) *
QUOTE(jpmatrix @ Oct 9 2007, 07:18 PM) *
first problem : i cannot put my asus wl110 cf card into master mode:
"operation not supported" ...
and i cannot go any further..........


see point 6 I made above


my problem is specific to the PSP:
if i set an adhoc network on the zaurus, i cannot connect to it on the PSP : i have a "network not found" message...
i think the PSP needs something special for adhoc connexion as it should be used to connect between 2 PSP (or more)
and i i choose "Infrastructure" on the PSP i cannot see my adhoc network on the zaurus


perhaps i should start a network first on the PSP, find the SSID with a scan on the Zaurus and try to connect on the same network on the zaurus...i'll try asap and let you know
Go to the top of the page
 
+Quote Post
speculatrix
post Oct 11 2007, 01:59 PM
Post #8





Group: Admin
Posts: 3,281
Joined: 29-July 04
From: Cambridge, England
Member No.: 4,149



QUOTE(jpmatrix @ Oct 10 2007, 04:10 PM) *
my problem is specific to the PSP:
if i set an adhoc network on the zaurus, i cannot connect to it on the PSP : i have a "network not found" message...


is your wifi card prism based, in which case it should be possible to get the full hostap driver and hostapd loaded and make the Z into an access point. I've never done this myself (something I've intended to do, to make my Z into a honeynet to see who bites at a public location), but in theory (hah!) it shouldn't be too hard.
Go to the top of the page
 
+Quote Post
jpmatrix
post Oct 13 2007, 12:07 AM
Post #9





Group: Members
Posts: 1,019
Joined: 15-February 05
From: France
Member No.: 6,477



QUOTE(speculatrix @ Oct 11 2007, 11:59 PM) *
QUOTE(jpmatrix @ Oct 10 2007, 04:10 PM) *
my problem is specific to the PSP:
if i set an adhoc network on the zaurus, i cannot connect to it on the PSP : i have a "network not found" message...


is your wifi card prism based, in which case it should be possible to get the full hostap driver and hostapd loaded and make the Z into an access point. I've never done this myself (something I've intended to do, to make my Z into a honeynet to see who bites at a public location), but in theory (hah!) it shouldn't be too hard.


problem is that my card only works with orinoco's drivers.... at least under debian titchy
i think i'll have to wait until hostap works
Go to the top of the page
 
+Quote Post
speculatrix
post Oct 14 2007, 05:47 AM
Post #10





Group: Admin
Posts: 3,281
Joined: 29-July 04
From: Cambridge, England
Member No.: 4,149



QUOTE(jpmatrix @ Oct 13 2007, 09:07 AM) *
problem is that my card only works with orinoco's drivers.... at least under debian titchy
i think i'll have to wait until hostap works


ah, I think that the default in debian & ubuntu will be to load the orinoco/hermes drivers for prism chipsets; you need to blacklist the orinoco driver and get it to load the hostap ones instead.

I've only briefly played with ubuntu/debian in this respect once, and I ended up hiding the orinoco drivers by renaming them to make it work.

good luck
Paul
Go to the top of the page
 
+Quote Post
jpmatrix
post Oct 15 2007, 02:55 AM
Post #11





Group: Members
Posts: 1,019
Joined: 15-February 05
From: France
Member No.: 6,477



QUOTE(speculatrix @ Oct 14 2007, 03:47 PM) *
QUOTE(jpmatrix @ Oct 13 2007, 09:07 AM) *
problem is that my card only works with orinoco's drivers.... at least under debian titchy
i think i'll have to wait until hostap works


ah, I think that the default in debian & ubuntu will be to load the orinoco/hermes drivers for prism chipsets; you need to blacklist the orinoco driver and get it to load the hostap ones instead.

I've only briefly played with ubuntu/debian in this respect once, and I ended up hiding the orinoco drivers by renaming them to make it work.

good luck
Paul


i think you did not understand me : my card doesn't work with the hostap drivers smile.gif it only works with orinoco's....
Go to the top of the page
 
+Quote Post
speculatrix
post Oct 16 2007, 02:13 AM
Post #12





Group: Admin
Posts: 3,281
Joined: 29-July 04
From: Cambridge, England
Member No.: 4,149



QUOTE(jpmatrix @ Oct 15 2007, 11:55 AM) *
i think you did not understand me : my card doesn't work with the hostap drivers smile.gif it only works with orinoco's....


oh, I see. Sorry, I was assuming that any card that based on the hermes/prism chipset would be controllable by hostap, but I now stand corrected.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 1st October 2014 - 04:18 AM