OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Problem With Cacko 1.23 On The C3200
sharpman
post Jul 25 2008, 04:40 PM
Post #1





Group: Members
Posts: 7
Joined: 15-July 08
Member No.: 22,061



Hello i have two problems with my zaurus.
First problem:I cleared my hdd(format,flash erase etc)Early i dont have this problem. after the instalation cacko didnt see sd card sad.gif but original rom has not this problem.
What should I do ?

Second problem:

I have this alert : HDD not initialized. I downloaded pack from trisoft , I add partitions with instruction and nothing. still this same sad.gif

my fstab from cacko:
QUOTE
Linux version 2.4.20 (maslovsky@linux) (gcc version 2.95.3 20010315 (release))
#4 Thu, 04 May 2006 23:11:42 +0400
CPU: XScale-PXA270 revision 7
Machine: SHARP Terrier
Converting old-style param struct to taglist
Ignoring unrecognised tag 0x00000000
Turbo Mode clock : 416.00MHz (*2.0, active)
Run Mode clock : 208.00MHz
System bus clock : 208.00MHz (1/1)
Memory clock : 208.00MHz (1/1)
LCD clock : 104.00MHz (1/2)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:71
68k@0k(smf),44032k@7168k(root),-(home) jffs2_orphaned_inodes=delete EQUIPMENT=5
LOGOLANG=1 DEFYEAR=2007 LOGO=1 LAUNCH=q
Console: colour dummy device 80x30
Calibrating delay loop... 415.33 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62160KB available (1980K code, 497K data, 136K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 8
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 2000210
enable_irq(120) unbalanced from c000c7d8
batok installed
Starting kswapd
Journalled Block Device driver loaded
JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communication
s AB.
Squashfs 2.2 (released 2005/07/03) © 2002-2004, 2005 Phillip Lougher
Sharp SL-Series PXA fb driver initialized.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: SHARPSL_PXAFB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 22) is a 16550A
ttyS01 at 0xf8700000x (irq = 20) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 21) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
spitz remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xxRAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Spitz audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00140000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MB 3,3V) Creating 3 MTD partitions on "NAND 128MB 3,3V":
0x00000000-0x00700000 : "smf"
0x00700000-0x03200000 : "root"
0x03200000-0x08000000 : "home"
Linux Kernel Card Services 3.1.31
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.31)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
Backlight Driver Initialized.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 381
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 136K
Trying to free nonexistent resource <f7000000-f700000f>
hda: HMS360606D5CF00, ATA DISK drive
ide0 at 0xf7000000-0xf7000007,0xf700000e on irq 136
hda: 12000556 sectors (6144 MB) w/128KiB Cache, CHS=11905/16/63
Partition check:
hda: hda1 hda2 hda3
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
hda: hda1 hda2 hda3
hda: hda1 hda2 hda3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset utf8
bvdd: Registeration is a success.
bvdd: AREA VIRTUAL PHYSICAL SIZE
bvdd: BVDD : 0xc597b000 0xa3600000 2097152
bvdd: PXAFB : 0xc3e00000 0xa3e00000 614400
bvdd: SRAM : 0xfe100000 0x5c001000 262144
hda: hda1 hda2 hda3
hda: hda1 hda2 hda3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset utf8


sry for my english:P
Go to the top of the page
 
+Quote Post
adf
post Jul 25 2008, 11:47 PM
Post #2





Group: Members
Posts: 2,821
Joined: 13-September 04
From: Wasilla Ak.
Member No.: 4,572



somewhere in the debian dual boot discussions zdevil posted a simple way to keep cacko from even bothering about those sharprom partitions. Myabe you could try that and partition the drive as you see fit?
Go to the top of the page
 
+Quote Post
sharpman
post Jul 26 2008, 02:13 AM
Post #3





Group: Members
Posts: 7
Joined: 15-July 08
Member No.: 22,061



I found this in the another topic

http://www.oesf.org/forum/index.php?act=at...ost&id=2244

I dont have /mnt/card /dev/mmcda1 ( everything is OK )

I logged as root and

mkdir /dev/mmcda1 and mount /dev/mmcda1 I saw : device or resource busy
so? :>
Go to the top of the page
 
+Quote Post
adf
post Jul 28 2008, 12:33 AM
Post #4





Group: Members
Posts: 2,821
Joined: 13-September 04
From: Wasilla Ak.
Member No.: 4,572



QUOTE(sharpman @ Jul 26 2008, 02:13 AM) *
I found this in the another topic

http://www.oesf.org/forum/index.php?act=at...ost&id=2244

I dont have /mnt/card /dev/mmcda1 ( everything is OK )

I logged as root and

mkdir /dev/mmcda1 and mount /dev/mmcda1 I saw : device or resource busy
so? :>

Mounting problem I suspect. How big is the SD?
Go to the top of the page
 
+Quote Post
sharpman
post Aug 2 2008, 09:12 AM
Post #5





Group: Members
Posts: 7
Joined: 15-July 08
Member No.: 22,061



i tested 1 and 2 gb card(witch sd updater for cacko)
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 31st October 2014 - 09:57 AM