 The USB Host on C3000 |
OESF Forums > Distros, Development, and Model Specific Forums > Model Specific Forums > C1000/3x00 General discussions  |
 Nov 21 2004, 11:36 AM
Post
#1
|
|
|
Group: Members Posts: 5 Joined: 21-November 04 Member No.: 5,553  |
 OK ，I 'd like to share the tips of setting up the USB Host on C3000.1.Get a mini AB cable and plug your usb mass storage in it 2.Plug it iin C3000 3.Open terminal and type the following words #bash 2.05 su #mount /dev/sda1/ mnt / usbstorage 4.open your file manager to check if your usb mass storage is mount on C3000 Translated from USB Host On C3000 |
 |
 
|
|
Nov 22 2004, 12:43 PM
Post
#2
|
|
|
Group: Members Posts: 6 Joined: 22-June 04 Member No.: 3,792 |
Have you or anyone else tried this on a c3000?
My understanding was that the Sharp ROM on the c3000 would not support USB Host. Bill |
|
|
|
|
Nov 23 2004, 06:08 AM
Post
#3
|
|
|
Group: Members Posts: 5 Joined: 21-November 04 Member No.: 5,553 |
QUOTE(wgp2000 @ Nov 22 2004, 08:43 PM) Have you or anyone else tried this on a c3000? My understanding was that the Sharp ROM on the c3000 would not support USB Host. Bill I've tested this and it DOES work great with my HDD mp3 player! But I am not sure if C3000 can detect devices that don't have a internal battery, such as card reader,etc. 
|
|
|
|
|
Nov 26 2004, 12:32 PM
Post
#4
|
|
 Group: Members Posts: 24 Joined: 13-November 04 Member No.: 5,440 |
Thanks for the tip xandery!
I just purchased the cable from iRiver, should be getting it soon 
|
|
|
|
|
Nov 29 2004, 06:53 PM
Post
#5
|
|
|
Group: Members Posts: 1 Joined: 29-November 04 Member No.: 5,672 |
QUOTE(xandery @ Nov 21 2004, 07:36 PM) OK ，I 'd like to share the tips of setting up the USB Host on C3000.1.Get a mini AB cable and plug your usb mass storage in it 2.Plug it iin C3000 3.Open terminal and type the following words #bash 2.05 su #mount /dev/sda1/ mnt / usbstorage 4.open your file manager to check if your usb mass storage is mount on C3000 Translated from USB Host On C3000 I tried this with my iriver140, but get failed no such device or address. Admittedly I used a connector to join two usb cable together. |
|
|
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 23rd May 2013 - 02:11 AM |