OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Pulling out and switching the keys, hardware keyboard
ShiroiKuma
post Nov 3 2004, 06:11 AM
Post #1





Group: Members
Posts: 902
Joined: 22-May 04
Member No.: 3,385



I'd like to change the layout on the physical hardware keyboard to Dvorak.

I've done this on a number of keyboards through the years, PC, Psion...

The 760's keyboard looks like the softer softer through which the individual keys protrude could be lifted from the side inserting a knife under it and then you could switch the keys.

Don't know if I want to fiddle with it though if it should be disassembled some other way, don't wanna mess it up.

Has anyone experimented with this?
Go to the top of the page
 
+Quote Post
blakeyez
post Nov 3 2004, 06:38 AM
Post #2





Group: Members
Posts: 90
Joined: 5-June 04
Member No.: 3,580



IIRC, this keyboard is one strip of 'plastic', somewhat like what you'd find in many cell phones. I don't know if you could rearrange the buttons at all...

Dave
Go to the top of the page
 
+Quote Post
kopsis
post Nov 3 2004, 08:13 AM
Post #3





Group: Members
Posts: 329
Joined: 1-July 04
Member No.: 3,880



You do recall correctly smile.gif The keyboard on the C760 is indeed just a single piece of translucent plastic. The keys are simply "thick spots" on the plastic membrane. The membrane is cleverly "painted" on the underside to give the illusion that the keys are distinct from the surrounding material. If you watch closely when you push a key, you will see the whole membrane (the key and the area around it) flex as the microswitch below makes contact. It's really an excellent design for a PDA as all moving parts are sealed within making it dirt and moisture resistant. But rearranging the keys is out of the question.
Go to the top of the page
 
+Quote Post
vputz
post Nov 3 2004, 10:58 AM
Post #4





Group: Members
Posts: 163
Joined: 9-September 04
Member No.: 4,529



...however, IF the physical rubber keys are separate from the membrane and microswitches, you could move the keys around and then remap the keyboard in software. That should work fine for a Dvorak layout.

-->VPutz
Go to the top of the page
 
+Quote Post
ShiroiKuma
post Nov 3 2004, 11:02 AM
Post #5





Group: Members
Posts: 902
Joined: 22-May 04
Member No.: 3,385



QUOTE(vputz @ Nov 3 2004, 10:58 AM)
...however, IF the physical rubber keys are separate from the membrane and microswitches, you could move the keys around and then remap the keyboard in software. That should work fine for a Dvorak layout.

-->VPutz

But are there any rubber keys?

If it's one whole piece of plastic (it seems to be, just looked smile.gif ), are the letters painted on it in black from the other side, or are there some separate rubber keys?
Go to the top of the page
 
+Quote Post
vputz
post Nov 3 2004, 11:08 AM
Post #6





Group: Members
Posts: 163
Joined: 9-September 04
Member No.: 4,529



Bah, you're right. Sorry about that. I am not one of the elevated folks that could afford a clamshell Z, so I'm looking at my wee 5000D, which does appear (from the outside, at least) to have individual wee keys, presumably pressing on a hidden membrane. Someday I'll grab an 860 or so...

Ah well, fun idea at least-->VPutz
Go to the top of the page
 
+Quote Post
akpoff
post Nov 3 2004, 07:36 PM
Post #7





Group: Members
Posts: 71
Joined: 4-June 04
From: Houston, TX
Member No.: 3,569



QUOTE(vputz @ Nov 3 2004, 11:08 AM)
Bah, you're right.  Sorry about that.  I am not one of the elevated folks that could afford a clamshell Z, so I'm looking at my wee 5000D, which does appear (from the outside, at least) to have individual wee keys, presumably pressing on a hidden membrane.  Someday I'll grab an 860 or so...

Ah well, fun idea at least-->VPutz

I don't think you can even re-arrange the keys, at least on a SL6K, as the keys IIRC were all attached to one another via plastic lattice. You could possibly break out the individual keys and place them where you want but I'm not that brave.

Have you considered teenly little stickies to remap the physical appearance? It'd be ugly but might work better.
Go to the top of the page
 
+Quote Post
BarryW
post Nov 13 2004, 03:34 PM
Post #8





Group: Members
Posts: 693
Joined: 4-June 04
From: Ohio
Member No.: 3,570



Since I had my 6000 apart last night I can tell you the keys on it are one big rubber piece. The keycaps are plastic but don't come off. I got spoiled by my ole clie and wanted backlit keys. Ended up adding a very small led to the bottom of the screen that light up the keypad when the slider is down.
Go to the top of the page
 
+Quote Post
Dez
post Dec 16 2004, 08:51 PM
Post #9





Group: Members
Posts: 4
Joined: 14-December 04
Member No.: 5,919



With respect to backlit keyboards, has anyone tried these (glow-in-the-dark keyboard stickers)?

http://www.latkey.com/glowing_stickers.asp
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 26th December 2014 - 09:15 PM