OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Driver For Zd1211b Usb Wifi Adaptor, Help Please
j.t.
post Nov 15 2006, 01:17 PM
Post #1





Group: Members
Posts: 1
Joined: 7-August 06
Member No.: 10,675



Would someone please compile this driver for OZ 3.5.4.1? I tried using the zd1211.ipk in the feed but it's a no go with my adaptor.

http://atheros.com/RD/downloads/download_ZD1211B.htm

After looking at the driver doc I believe they use the same source the only difference being:
make ZD1211REV_B=0 (0 for ZD1211, 1 for ZD1211B)

Any assistance is appreciated
J.T.

Here is the card info:
Bus 001 Device 009: ID 0ace:1215
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0ace
idProduct 0x1215
bcdDevice 48.10
iManufacturer 16 ZyDAS
iProduct 32 USB2.0 WLAN
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 500mA
Go to the top of the page
 
+Quote Post
ldrolez
post Nov 27 2006, 01:22 AM
Post #2





Group: Members
Posts: 69
Joined: 16-May 06
From: France, Metz
Member No.: 9,882



Hi !
I've got the driver for the 2.4.20 Cacko kernel but, it's useless since the adaptor draws too much power on the USB bus to work properly. I see "MaxPower 500mA" above, so you may be in the same case. Anyway, if it works, please tell me where you bought it because some guys have found keys[ which are less power hungry.
Cheers,
Ludo.
Go to the top of the page
 
+Quote Post
wallie
post Dec 3 2006, 12:24 PM
Post #3





Group: Members
Posts: 2
Joined: 3-December 06
From: Moscow, Russia
Member No.: 13,067



QUOTE(ldrolez @ Nov 27 2006, 01:22 PM)
Hi !
I've got the driver for the 2.4.20 Cacko kernel but, it's useless since the adaptor draws too much power on the USB bus to work properly. I see "MaxPower 500mA" above, so you may be in the same case. Anyway, if it works, please tell me where you bought it because some guys have found keys[ which are less power hungry.
Cheers,
  Ludo.
*


ldrolez, I would be interested in that driver and script if it would work with SL-C1000.
Would you mind sharing, and how do you install it?

Thanks, Wallie
Go to the top of the page
 
+Quote Post
ldrolez
post Dec 10 2006, 05:19 AM
Post #4





Group: Members
Posts: 69
Joined: 16-May 06
From: France, Metz
Member No.: 9,882



For cacko 2.4.20 kernel: http://ldrolez.free.fr/software/zaurus/code/
Go to the top of the page
 
+Quote Post
scholbert
post Dec 27 2006, 02:07 PM
Post #5





Group: Members
Posts: 48
Joined: 21-November 05
Member No.: 8,576



Hi,

QUOTE(ldrolez @ Dec 10 2006, 02:19 PM)



Seems to work, but as already mentioned the power consumption is too much for the Clamshells (The stick needs ~195mA during network scan).
Here's what i got with a Yakumo Quickwlan USB 54:

...
usb.c: USB device 2 (vend/prod 0xace/0x1215) is not claimed by any active driver.
ZD1211B - http://zd1211.ath.cx/ - SVN_TRUNK
Based on www.zydas.com.tw driver version 2.5.0.0
usb.c: registered new driver zd1211b
Release Ver = 4810
zd1211:bulk out: wMaxPacketSize = 40
zd1211:bulk in: wMaxPacketSize = 40
zd1211:interrupt in: wMaxPacketSize = 40
zd1211:interrupt in: int_interval = 1
zd1211:bulk out: wMaxPacketSize = 40
EEPORM Ver = 4810
zd1211:USB Download Boot code success
zd1211:MAC address = 00:02:72:57:26:88
zd1211:AddrEntryTable = f7c6
zd1211:RF_Mode = 80000584
PA type: 0
Airoha AL2230S_RF
zd1211:Pure B-Mode
zd1211:AllowedChannel = 000007ff
zd1211:LinkLEDn = 200
AllowedChannel = 000107ff
Region:48
zd1205: (exit) zd1205_config, src/zd1205.c line 2601
zd1205: (exit) zd1205_init, src/zd1205.c line 8570
...

I will try to use a hub with external power supply and post my further test results.

Regards,

scholbert
Go to the top of the page
 
+Quote Post
cschafer
post Apr 17 2007, 11:36 AM
Post #6





Group: Members
Posts: 17
Joined: 28-October 03
Member No.: 794



QUOTE(j.t. @ Nov 15 2006, 01:17 PM)
Would someone please compile this driver for OZ 3.5.4.1?  I tried using the zd1211.ipk in the feed but it's a no go with my adaptor.

http://atheros.com/RD/downloads/download_ZD1211B.htm

After looking at the driver doc I believe they use the same source the only difference being:
make ZD1211REV_B=0 (0 for ZD1211, 1 for ZD1211B)

Any assistance is appreciated
J.T.

Here is the card info:
Bus 001 Device 009: ID 0ace:1215 
Device Descriptor:
  bLength                18
  bDescriptorType        1
  bcdUSB              2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass      255 Vendor Specific Subclass
  bDeviceProtocol      255 Vendor Specific Protocol
  bMaxPacketSize0        64
  idVendor          0x0ace
  idProduct          0x1215
  bcdDevice          48.10
  iManufacturer          16 ZyDAS
  iProduct              32 USB2.0 WLAN
  iSerial                0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                9
    bDescriptorType        2
    wTotalLength          46
    bNumInterfaces          1
    bConfigurationValue    1
    iConfiguration          0
    bmAttributes        0x80
    MaxPower              500mA
*


Would the 1211b driver for the 1215 wifi stick? If it does any way you can post the compiled driver for the latest cacko.

This would be awesome.

Cory
Go to the top of the page
 
+Quote Post
boardboyd
post Jun 15 2007, 10:09 PM
Post #7





Group: Members
Posts: 50
Joined: 19-November 04
Member No.: 5,523



QUOTE(cschafer @ Apr 17 2007, 07:36 PM)
QUOTE(j.t. @ Nov 15 2006, 01:17 PM)
Would someone please compile this driver for OZ 3.5.4.1?  I tried using the zd1211.ipk in the feed but it's a no go with my adaptor.

http://atheros.com/RD/downloads/download_ZD1211B.htm

After looking at the driver doc I believe they use the same source the only difference being:
make ZD1211REV_B=0 (0 for ZD1211, 1 for ZD1211B)

Any assistance is appreciated
J.T.

Here is the card info:
Bus 001 Device 009: ID 0ace:1215 
Device Descriptor:
  bLength                18
  bDescriptorType        1
  bcdUSB              2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass      255 Vendor Specific Subclass
  bDeviceProtocol      255 Vendor Specific Protocol
  bMaxPacketSize0        64
  idVendor          0x0ace
  idProduct          0x1215
  bcdDevice          48.10
  iManufacturer          16 ZyDAS
  iProduct              32 USB2.0 WLAN
  iSerial                0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                9
    bDescriptorType        2
    wTotalLength          46
    bNumInterfaces          1
    bConfigurationValue    1
    iConfiguration          0
    bmAttributes        0x80
    MaxPower              500mA
*


Would the 1211b driver for the 1215 wifi stick? If it does any way you can post the compiled driver for the latest cacko.

This would be awesome.

Cory
*



I've looked around and apparently the 1211b driver works for the 1215 device, but I've compiled lud's driver on my 3100 in Cacko and haven't been able to get it recognize the Gigafast WF748-CUI usb wifi I have which has the ZyDas 1215 chipset.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 30th September 2014 - 09:58 AM