OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Prism 2.5 Firmware Trouble, Trying to get my wifi card to work on Cacko 1.23 with updated firmware
Jockie
post Oct 19 2011, 09:17 PM
Post #1





Group: Members
Posts: 13
Joined: 26-April 09
From: Japan
Member No.: 37,769



I have a Buffalo WLI-CF-S11G wireless card for my SL-C1000. It is running Cacko 1.23 (heavy?).
I want to be able to connect the Zaurus to my secure WPA network at home and I am interested in testing 'aircrack-ng' . From their website it seems one must use Station firmware >=1.5.6.

My card was running older firmware; here is the output of
CODE
# dmesg | grep wifi

QUOTE
wifi0: NIC: id=0x800c v1.0.0
wifi0: PRI: id=0x15 v1.0.5
wifi0: STA: id=0x1f v1.3.4


I followed Jun Sun's mini-HOWTO guide and flashed the card on my Windows XP laptop using the WinUpdate program. It didn't go so smoothly and I had to select 'Disable' in the 'Firmware Download' section of the card's properties (explained clearer here).
After that, flashing with WinUpdate seemed to work and the card now has Primary firmware 1.1.1 and Secondary (Station) firware 1.7.4.
But, now the card is not functioning well. It appears that the card is working for about 1 second after insertion - as the lights come on, and then it is susended or somesuch - as the lights go off.
The command
CODE
# dmesg | grep wifi

spits out repetitions of this
QUOTE
wifi0: hfa384x_cmd: interrupted; err=-110
wifi0: hfa384x_get_red: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg-0x8888
wifi0: hfa384x_cmd: entry still in list? (entry-c3a64be0, type=0, res=-1)

(but an odd thing happened as I ran that last code, appended to the end was this
QUOTE
wifi0: hfa384x_cmd: interrupted; err=-110
wifi0: hfa384x_get_red: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)
wifi0: NIC: id=0x0800c v1.0.0
wifi0: PRI: id=0x15 v1.1.1
wifi0: STA: id=0x1f v1.7.4

When I ran the command again it was back to the usual repetitions without the above appendage.

I decided to try and download and compile hostap-utils-0.4.7 as suggested here.
I downloaded the file from here and then followed these commands but when I came to the command
CODE
make

This message was returned
QUOTE
-bash: make: command not found


What am I doing wrong?
Should I be using a different ROM?
Why won't my card function properly in Cacko 1.23 with the updated firmware?

Could you give me a little help if you are able to please?
Go to the top of the page
 
+Quote Post
Dromede
post Oct 21 2011, 03:11 AM
Post #2





Group: Members
Posts: 156
Joined: 10-December 06
From: Croatia
Member No.: 13,288



You don't have make (and probably gcc) installed. You need to find an sdk package for sharp/roms. I think it was called zgcc or something like that. You will probably have a hard time finding that, maybe it would be easier if you compiled hostap-utils on your desktop. You will need a cross compiler.

http://distro.ibiblio.org/pub/linux/distri...0.12.05.tar.bz2

here's some info on cross compiling:

http://www.oesf.org/index.php?title=Pdaxro...oss_Compilation

Hostap-utils should be trivial to cross compile as it probably depends only on libc.
Go to the top of the page
 
+Quote Post
stefb
post Oct 24 2011, 01:46 AM
Post #3





Group: Members
Posts: 19
Joined: 22-April 08
From: Germany
Member No.: 21,662



> Cacko 1.23
> wifi0: PRI: id=0x15 v1.1.1
> wifi0: STA: id=0x1f v1.7.4

This sounds good for WPA wifi connection.
I have this combination working on a C3200.

Why do you want to compile the hostap-utils-0.4.7?

There are already complied versions for hostap and wpa_supplicant available.
I'll check what i have installed and give you the file names when i'm back home.

Stefan
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 28th November 2014 - 03:12 AM