Libsdl Applications Not Working With Oz 3.5.4 Options

[sconfrms]

Both e-uae and Frodo (4.2-r1) do not work straight from package installation from the 3.5.4 feed. I believe that it is a libSDL problem. I see mentions to this problem in earlier posts, but not concerning 3.5.4...

Here is a detailed account of my problems with Frodo:

The icon for Frodo under Games doesn't do anything.

Upon further inspection, when I type `frodo` at the command prompt, I get this:
-sh: frodo: Permission denied

`which frodo` reveals:
/opt/QtPalmtop/bin/frodo

which is a directory...

if I attempt to run frodostart under /opt/QtPalmtop/bin/frodo, I get:

error: CmdPipe: unable to execute child process wish
~CmdPipe child process returned error
QT_GetMachine: /proc/cpuinfo is Processor : Intel StrongARM-1110 rev 9 (v4l)
BogoMIPS : 137.21
Features : swp half 26bit fastmult
CPU implementor : 0x69
CPU architecture: 4
CPU variant : 0x0
CPU part : 0xb11
CPU revision : 9

Hardware : Sharp-Collie
Revision : 0000
Serial : 0000000000000000

detected machine is 'Sharp SL-5500'
QT_GetRotation: Read spec from '/tmp/qtembedded-root/QtEmbedded-0.spec'
Rot=0, Qvga=0
Fatal signal: Segmentation Fault (SDL Parachute Deployed)

I installed the package by using `ipkg install frodo -dest sd` and then
`ipkg-link add frodo`

This is with the SL-5500 or collie.

--

[fooman]

For Frodo, did you install the C64 ROMs? You must get them from somewhere and install them into /opt/QtPalmtop/bin/frodo as described on the Frodo homepage. Be sure to give them the exact same names, i.e. "Kernal ROM", "Char ROM", "1541 ROM" and "Basic ROM".

Both e-uae and Frodo (4.2-r1) do not work straight from package installation from the 3.5.4 feed.  I believe that it is a libSDL problem.  I see mentions to this problem in earlier posts, but not concerning 3.5.4...

Here is a detailed account of my problems with Frodo:

The icon for Frodo under Games doesn't do anything.

Upon further inspection, when I type `frodo` at the command prompt, I get this:
-sh: frodo: Permission denied

`which frodo` reveals:
/opt/QtPalmtop/bin/frodo

which is a directory...

if I attempt to run frodostart under /opt/QtPalmtop/bin/frodo, I get:

error: CmdPipe: unable to execute child process wish
~CmdPipe child process returned error
QT_GetMachine: /proc/cpuinfo is Processor      : Intel StrongARM-1110 rev 9 (v4l)
BogoMIPS        : 137.21
Features        : swp half 26bit fastmult
CPU implementor : 0x69
CPU architecture: 4
CPU variant    : 0x0
CPU part        : 0xb11
CPU revision    : 9

Hardware        : Sharp-Collie
Revision        : 0000
Serial          : 0000000000000000

detected machine is 'Sharp SL-5500'
QT_GetRotation: Read spec from '/tmp/qtembedded-root/QtEmbedded-0.spec'
Rot=0, Qvga=0
Fatal signal: Segmentation Fault (SDL Parachute Deployed)

I installed the package by using `ipkg install frodo -dest sd` and then
`ipkg-link add frodo`

This is with the SL-5500 or collie.

--