Irda-device On Eabi Options

[LinuxGadget]

Hi all,

my C1k is running EABi on 2.6.22.9-yonggun. Tried to setup the irda-stuff. So installed irda and irda-utils.
Now, when am doing

CODE

irattach /dev/ttySx (x=0,...,2)

it gives in /var/log/messages:

CODE

Jan  4 22:53:43 Zaurus irattach: Stopping device /dev/ttyS2
Jan  4 22:53:43 Zaurus irattach: ioctl(SIOCGIFFLAGS): No such device
Jan  4 22:53:43 Zaurus irattach: exiting ...

But in /var/log/dmesg are theses devices:

CODE

pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART

and ls -l /dev/ttyS*

CODE

crw-rw-rw- 1 root dialout 4, 64 Jan  4 20:44 /dev/ttyS0
crw-rw-rw- 1 root dialout 4, 65 Jan  4 20:44 /dev/ttyS1
crw-rw-rw- 1 root dialout 4, 66 Jan  4 20:44 /dev/ttyS2

So, where am i missing the point ?

[Vitel]

Try this, it works for me on the same kernel:

CODE

modprobe pxaficp_ir
modprobe ircomm
modprobe ircomm_tty
irattach irda0 -s

After this /dev/ircomm0 is ready to use.

[LinuxGadget]

Thanks, Vitel! Irda is working perfectly.
Now let's see if my Polar Hrm is syncing with my Z.

[jpmatrix]

(smile) this article will soon be wikified! (smile)

so far for me:

1) i had to apt-get install irda-utils

2) i had to create the /dev/ircomm0 device node :

mknod /dev/ircomm0 c 161 0

3) then :

modprobe pxaficp_ir
modprobe ircomm
modprobe ircomm_tty
irattach irda0 -s

4) i modprobe irda too

5) now wammu can see my nokia 6021 !
and it seems to retrive the infos!!!

thanks everybody !

[LinuxGadget]

(smile) this article will soon be wikified! (smile)

Excellent idea!

Maybe you could also add your steps setting up bluetooth? http://www.oesf.org/forum/index.php?showto...mp;hl=bluetooth, did the job for me. Had some troubles with pairing, but now my S-E K320i syncs with some quirks on my Z (opensync+evolution+contacts). Really nice