 Asus WL-1100 / Z 5500, Wireless problem |
  |
  Sep 22 2004, 03:07 PM
Post
#1
|
|
|
Group: Members Posts: 32 Joined: 2-August 04 Member No.: 4,182  |
HelloZ...
I've Zaurus 5500. Last week i bought a Asus WL-110 for it. I'm trying to put it to work, but no success... i've read a lot of post but i can't understand, what's going wrong. SHARP ZAURUS 5500 ASUS WL-110 >cardctl ident Socket 0: product info: "ASUS", "802_11B_CF_CARD_25", "Version 01.00", "" manfid: 0x02aa, 0x0002 function: 6 (network) Socket 1: no product info avaiable > ifconfig Only appear info about lo and usbd0. Nothing about eth0!  My WLAN config, are only the SSID and Channel. As mencioned in this page My testing's have been in changing values on "Internet Wizard", "Network & Sync", "Wireless LAN Setting". I know that A.P. is working because i have laptop connected to it. I need to get this to work, but i'm very confused. First I need to know if the Card is recognized and correctly configured. And then i need help, to put the WLAN to work... Please Help Me  Regards NCarvalho |
 |
 
|
|
Sep 22 2004, 03:11 PM
Post
#2
|
|
|
Group: Members Posts: 32 Joined: 2-August 04 Member No.: 4,182 |
 One more info that i've found now >cardctl status Socket 0: 3.3V 16-bit PC Card function 0: [ready] Socket 1: no card So, i think that card is ready to work... ... but what should be the next step?? NCarvalho |
|
|
|
|
Sep 22 2004, 04:20 PM
Post
#3
|
|
|
Group: Members Posts: 32 Joined: 2-August 04 Member No.: 4,182 |
News news news....
"No, it's not working yet" I've found this post: http://www.oesf.org/forums/inde...?showtopic=4980 i done the step by step: QUOTE 1. Plug in the card, type cardctl ident 2. You should get a bit of info for Socket 0. Copy down the "product info:" text ("WLAN", "11Mbps_PC-Card_3.0", "ISL37100P", "Eval-RevA" for my card) 3. Edit the file /etc/pcmcia/wlan-ng.conf and add the following... 1. card "Some description" 2. version the product info text you copied above 3. bind "prism2_cs" 4. Save the file unplug the card and reboot. The card should be recognised when you plug it in. You will then be able to set up networking as normal. So i've add to my /etc/pcmcia/wlan-ng.conf QUOTE card "Asus" "ASUS", "802_11B_CF_CARD_25", "Version 01.00", "" bind "prism2_cs" And rebooted... Now the Card is recognized... ifconfig already shows eth0. but i can't get the IP from router ... that will be the next step... NCarvalho |
|
|
|
|
Sep 23 2004, 03:40 AM
Post
#4
|
|
|
Group: Members Posts: 102 Joined: 7-September 04 From: UK Member No.: 4,489 |
QUOTE(ncarvalho @ Sep 23 2004, 01:20 AM) News news news.... "No, it's not working yet" I've found this post: http://www.oesf.org/forums/inde...?showtopic=4980 i done the step by step: QUOTE 1. Plug in the card, type cardctl ident 2. You should get a bit of info for Socket 0. Copy down the "product info:" text ("WLAN", "11Mbps_PC-Card_3.0", "ISL37100P", "Eval-RevA" for my card) 3. Edit the file /etc/pcmcia/wlan-ng.conf and add the following... 1. card "Some description" 2. version the product info text you copied above 3. bind "prism2_cs" 4. Save the file unplug the card and reboot. The card should be recognised when you plug it in. You will then be able to set up networking as normal. So i've add to my /etc/pcmcia/wlan-ng.conf QUOTE card "Asus" "ASUS", "802_11B_CF_CARD_25", "Version 01.00", "" bind "prism2_cs" And rebooted... Now the Card is recognized... ifconfig already shows eth0. but i can't get the IP from router ... that will be the next step... NCarvalho Are you trying to get an IP via DHCP? If so you may need to add that to your /etc/network/interfaces file under the eth0 section. Also you've not said which ROM you're using, is dhcpclient installed? |
|
|
|
|
Sep 23 2004, 11:27 AM
Post
#5
|
|
|
Group: Members Posts: 32 Joined: 2-August 04 Member No.: 4,182 |
Hy jamesm
QUOTE(jamesm @ Sep 23 2004, 11:40 AM) Are you trying to get an IP via DHCP? If so you may need to add that to your /etc/network/interfaces file under the eth0 section. Also you've not said which ROM you're using, is dhcpclient installed? Yes, i'm tryng to get IP via DHCP, but no success. Maybe that's what's missing. I don't have /etc/network/interfaces The most alike is: /etc/network-device Should I create /etc/network/interfaces?? (i don't think so) What could be the problem here? Regards... NCarvalho PS: I think i will try config static IP. I post the results here.... NC |
|
|
|
|
Sep 23 2004, 11:38 AM
Post
#6
|
|
|
Group: Members Posts: 32 Joined: 2-August 04 Member No.: 4,182 |
Static IP doens't work neither.
In my Acess Point log's, i cant see reference too Zaurus WiFi MacAdress. So.. they aren't comunicating... My A.P. is working with Laptop, so the problem is in Zaurus NCarvalho |
|
|
|
|
Sep 23 2004, 11:41 AM
Post
#7
|
|
 Group: Members Posts: 114 Joined: 7-December 03 Member No.: 1,057 |
Which ROM are you using ?
You probably not far to get it working really. |
|
|
|
|
Sep 23 2004, 01:09 PM
Post
#8
|
|
|
Group: Members Posts: 32 Joined: 2-August 04 Member No.: 4,182 |
Hy Psycho
I'm using original ROM - 2.39 (sorry i've missed telling that) There's any help you can give me?? I'm almost there... but not working yet! NCarvalho |
|
|
|
|
Sep 30 2004, 03:34 AM
Post
#9
|
|
|
Group: Members Posts: 32 Joined: 2-August 04 Member No.: 4,182 |
Hy
I know that some people in this forum have managed to make ASUS WL-110 work with Zaurus. I Have Zaurus 5500 and a Asus WL-110... but i can't make it work. Can anyone help me make my zaurus better?? NCarvalho |
|
|
|
|
Sep 30 2004, 03:48 AM
Post
#10
|
|
 Group: Members Posts: 252 Joined: 25-April 04 Member No.: 3,006 |
Well, I never used the original sharp rom. But the ASUS Card works out of the box with the newer OZ roms (Hentges roms and OZ 3.5.1).
It worked also out of the box with the tkcRom, that is based on Sharprom. I think it will work with newer Sharproms 3.1x and the Cacko rom out of the box too. Cheers, Sam |
|
|
|
|
Oct 1 2004, 11:32 AM
Post
#11
|
|
|
Group: Members Posts: 32 Joined: 2-August 04 Member No.: 4,182 |
Hy Teletubbie
Thanks for the information. But that means that i need to change ROM?? I'm new with Zaurus, and i don't have the know-how enough to do an operation like that.... not yet. Any other way will be good... Regards NCarvalho |
|
|
|
|
Oct 1 2004, 11:41 AM
Post
#12
|
|
|
Group: Members Posts: 114 Joined: 7-December 03 Member No.: 1,057 |
I dont know how to fix your problem, but for the other rom, maybe flashing cacko on your 5500 will fix your problem.
Thats mean thought you would lose your data, or just sync them on your pc, then flash cacko and sync them back. Because i doubt you can backup the sharp rom, flash the cacko rom and restore it over. Else i advice you to try cacko or OpenZaurus 3.5.1, they are nice roms, with a lots more features than the basic sharp ROM. there is probably an howto here on this site how to do it, else check in the download section for the cacko rom and www.openzaurus.org for OZ rom, both worth the try, maybe try both of them and choose the one you prefer I know a lots of 5500 users use OZ.Good luck =P 
|
|
|
|
|
Oct 1 2004, 02:29 PM
Post
#13
|
|
|
Group: Members Posts: 252 Joined: 25-April 04 Member No.: 3,006 |
Hi ncarvalho,
yes this means changing rom. Using any other rom will increase stability on you zaurus comparing with the 2.3x sharproms. Well OZ 3.5.1 is maybe a little bit tricky, if you are new to zaurus. Maybe you try the 3.1x roms from sharp. These are regular updates so to your rom and the update process is described on sharp sites. I would recommend to use a compact flash card to flash, not the way using the craddle. Flashing sharproms update the bootloader code in Zaurus. Flashing other roms dont deal with these deeper levels of code. So they are not dangerous to flash (well this dont means that flashing sharprom is dangerous, i just dont know it for sure). I have two Zaurus. One for everyday life. The second one for testing etc. I flashed the second Z a lot of times (cant count). Flashing the Zaurus is not a really big issue  You should just be carefull to backup your data and sync before, so you can restore it after flashing. Cheers, Sam |
|
|
|
|
Jan 27 2005, 02:06 PM
Post
#14
|
|
|
Group: Members Posts: 3 Joined: 27-January 05 Member No.: 6,328 |
Hi, i don't know if you are still searching for a solution so i just gonna post it.
You don't need to upgrade to another Rom (else then the Sharp one, but get the latest of it). Just open your /etc/pcmcia/wlan-ng.conf and add the following at the end of the file: card "ASUS Spacelink WL-110 Wireless LAN CF Card" manfid 0x02aa, 0x0002 bind "prism2_cs" After the alteration, reboot the machine and plug in the card. Greez Acid Snoop |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 24th May 2013 - 01:24 AM |