OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Sl-c3100 & Wi-fi Smc2642w Problem
Doommaker
post Aug 9 2005, 06:34 AM
Post #1





Group: Members
Posts: 1
Joined: 9-August 05
Member No.: 7,819



H!
I have a big trouble with my wireless cf card SMC EZ Connect SMC2642W 802.11b:
bash-2.05$ cardctl ident
Socket 0:
product info: " ", "SMC2642W 11Mbps Wireless CF Card", ""
manfid: 0xd601, 0x0005
function: 6 (network)

I can connect to access point, but ping don't work. dmesg after ping:
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.
p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped.

bash-2.05$ iwconfig wlan0
Warning: Driver for device wlan0 has been compiled with version 14
of Wireless Extension, while this program is using version 13.
Some things may be broken...

wlan0 IEEE 802.11-DS ESSID:"home" Nickname:"home"
Mode:Auto Channel:0 Access Point: 00:00:00:00:00:00
Bit Rate:2Mb/s Tx-Power:-1017749836 dBm
Retry min limit:8 RTS thr:off Fragment thr:off
Link Quality:0/92 Signal level:-69 dBm Noise level:-90 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

bash-2.05$ ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:60:B3:69:73:FE
inet addr:192.168.0.46 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:135

dmesg
prism2cs_init: prism2_cs.o: 0.2.1-pre25 Loaded
prism2cs_init: dev_info is: prism2_cs
prism2_cs: index 0x01: Vcc 3.3, irq 135, io 0xf6000000-0xf600003f
pxa_pcmcia_suspend(0)
hfa384x_docmd_wait: hfa384x_cmd timeout(1), reg=0x8888.
hfa384x_drvr_start: Initialize command failed.
hfa384x_drvr_start: Failed, result=-110
prism2sta_ifstate: hfa384x_drvr_start() failed,result=-110
ident: nic h/w: id=0x800c 1.0.0
ident: pri f/w: id=0x15 1.0.7
ident: sta f/w: id=0x1f 1.3.6
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 99SA01000000
ident: nic h/w: id=0x800c 1.0.0
ident: pri f/w: id=0x15 1.0.7
ident: sta f/w: id=0x1f 1.3.6
MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=4/4
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 99SA01000000

system info:
qtopia v. 1.54
linux kernel v. 2.4.20
rom version 1.01 jp

sorry for my poor language
help me please
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 17th September 2014 - 05:43 PM