![]() |
![]() |
![]()
Post
#1
|
|
![]() Group: Members Posts: 696 Joined: 17-January 04 Member No.: 1,468 ![]() |
Thanks C-Guys!
I was poking around the driver for their WiFi card to investigate something. Then, I realized that they completely replace the sharp_sdmmc kernel module with their own SD/SDIO stack. So just for fun, I installed it and surprise, I can now read, write, and mount a Sandisk 2 GB SD card. So far, it's been working very reliably. Now, the catches: 1) It works fine on my C760 (running Cacko 1.12). But, when I tried to install the modules on my 6000, I got kernel oopses. So, it may be very sensitive to the model/kernel that is running. This is not that surprising since C760 is one of the few models listed as supported on their website. 2) vfat filesystems are fine. I had some problems with ext2. I fixed it by reformatting my card with "mke2fs -b 1024 /dev/mmcda1". This driver doesn't seem to like block sizes > 1024. Anyway, if you want to repeat my experiment, just download and install this ipk, and reboot the Zaurus: http://c-guys.net/cgi-bin/download/passche...n_arm.ipk&key=1 |
|
|
![]() |
![]()
Post
#2
|
|
Group: Members Posts: 18 Joined: 19-August 04 Member No.: 4,335 ![]() |
hello there
i have a sl c750 running cacko 1.23 added sdlink drivers got the 4gb sd to mount mke2fs -b 1024 /dev/mmcda1 mount /dev/mmcda1 /mnt/card SD card mounts ok i used the custom sdiomgr & cudtom sdcontrol Still the card will never mount automatically on insert but mount with no trouble when manually mounted somebody can help me? |
|
|
![]() ![]() |
![]() |
Lo-Fi Version | Time is now: 23rd April 2018 - 07:11 PM |