New Packages Announcement, *PACKAGE ANNOUNCEMENTS ONLY* Options

[Capn_Fish]

Gpaint- A program very similar to Microsoft Paint.

Requires:

libgnomeui
libbonoboui
libgnome
gnomevfs
libbonobo
gconf
orbit2
gnome-keyring

Most if not all of these can be found here:

http://zaurus.spy.org/feeds/cacko/pdaXrom/...eta2/c760/feed/

You can start it with #gpaint-2

It works best in portrait mode.

Attached File(s)

 gpaint_2_0.3.0_armv5tel.ipk ( 232.28K ) Number of downloads: 174

 

[uMP2k]

This game have two binaries, civclient and civserver ,however u need use civclient.sh and civserver.sh for loads at Zaurus... this is a HOWTO play offline!
1- Start SERVER
$ civserver.sh put 7 AI players b.e.
set aifill=7
2- At civclient loaded by icon, setup a name and connect to localhost port 5555
3- Starts the game! 

Thanks for the response - now I see how it is suppossed to work.

unfortunately my C1000 setup with beta3 does not seem to have enough free memory to run it. I can start the server in a terminal, but when I then try to run the client from the icon it just freezes on the opening screen.

I think I will give the older version a go and see if I have any luck with it/

Try use a SWAP, look at forums for a how to!

Thanks - I will try that.

At the moment I have the older version installed and running. But I will give the swap a try. I would love to get the newer version running.

[pungipungi]

Port of fltk-bedic to efltk lbrary is now ready.

For further informations please look at the efltk thread:

[anunakin]

GaIM 2.0.0 beta3.1

FEED: http://zaurus.vivaphp.net/pdaxrom/misc
IPK: gaim_2.0.0-beta3.1_armv5tel.ipk

IPK for Cxx00:
Compiled, but not saving config files with iwmmx CFLAGs

CODE

Package: gaim
Version: 2.0.0-beta3.1
Architecture: armv5tel
Maintainer: http://gaim.sf.net/
Description: Send instant messages over multiple protocols: ICQ, MSN, Jabber, Yahoo, ...
Depends: xfree libao gtk2 atk glibc audiofile libz libpng glib2 pango cairo gnutls
Size: 2.5M

Tested and working with ICQ, Yahoo, Jabber/Gmail and MSN
This package was tested in pdaXrom 1.1.0r121 only!

[zi99y]

Port of fltk-bedic to efltk lbrary is now ready.

For further informations please look at the efltk thread:

pungipungi

I'm having great difficulty getting either of your efltk ipks to work-

chess installs but when I run it complains about "libefltk.so.2.0" missing, I see no other package that might provide this.

bedic won't allow me to install the ipk- I get an error relating to "....efltk-bedic/control/control': Not a directory" and I can't unpack the ipk...

Also I have tried adding your page to my feeds and when I try to install that way I just get file not found errors - I think you need to update the package file or something.

ta!

[pungipungi]

For further informations please look at the efltk thread:

chess installs but when I run it complains about "libefltk.so.2.0" missing, I see no other package that might provide this.

bedic won't allow me to install the ipk- I get an error relating to "....efltk-bedic/control/control': Not a directory" and I can't unpack the ipk...

Please follow the link to the efltk thread given above. There you find the newest efltk packages. Afterwards try to install my packages oncemore.

I will check the efltk-bedic package by the end of the week but I think it only complains about it but installation is ok.

If there are further problems with the ipks then please report it to me by a PM. In the meanwhile you can overcome it with:

tar -xvzf <any-of-my- ipkg>.ipk
then sftp the data.tar.gz file to the zaurus
going to / (or better to /tmp for first seeing what's going on)
tar -xvzf data.tar.gz

For efltk-chess please make a link /usr/bin/gnuchess to the correct location of gnuchess.

Andreas

[Lemuus]

hi.
http://www.alobbs.com/macchanger/
A GNU/Linux utility for viewing/manipulating the MAC address of network interface.
Features

* Set specific MAC address of a network interface
* Set the MAC randomly
* Set a MAC of another vendor
* Set another MAC of the same vendor
* Set a MAC of the same kind (eg: wireless card)
* Display a vendor MAC list (today, 6800 items) to choose from


Daniel

Attached File(s)

 macchanger_1.5.0_armv5tel.ipk ( 81.02K ) Number of downloads: 63

 

[ZDevil]

Crimson Fields 0.4.9
-- Requires: SDL, SDL_ttf
-- Map editor and other tools plus manpage are all included
 crimson_fields_049.png ( 132.72K ) Number of downloads: 203

 crimson_0.4.9_armv5tel.ipk ( 831.66K ) Number of downloads: 113


NoteCase 1.2.3 (Updated)
-- See the screenshot for the new goodies.
 notecase_123.png ( 51.42K ) Number of downloads: 350

Main program:  notecase_1.2.3_armv5tel.ipk ( 207.91K ) Number of downloads: 128

Locale files:  notecase_locale_1.2.3_armv5tel.ipk ( 94.69K ) Number of downloads: 97


Xpad 2.12 (Updated)

Main program:  xpad_2.12_armv5tel.ipk ( 53.08K ) Number of downloads: 73

Man page & locale files:  xpad_man_locale_2.12_armv5tel.ipk ( 13.57K ) Number of downloads: 36


Scrot 0.8
-- A small yet very handy commandline screen capturing tool.
-- Written by the author of Feh (a nice picture viewer; there's a package by Chero in his contrib feed).
-- Screenshot are saved in .png format with time stamp added automatically.
-- Easier to use than xwd and no need to convert from .xwd to other formats by the not-so-small imagemagick.
-- Use "scrot --help" to find out the options.

 scrot_0.8_armv5tel.ipk ( 9.39K ) Number of downloads: 120


Enjoy!

[daniel3000]

NoteCase 1.2.3 (Updated)
-- See the screenshot for the new goodies.
 notecase_123.png ( 51.42K ) Number of downloads: 350

Main program:  notecase_1.2.3_armv5tel.ipk ( 207.91K ) Number of downloads: 128

Locale files:  notecase_locale_1.2.3_armv5tel.ipk ( 94.69K ) Number of downloads: 97

Thanks ZDevil for packaging!

Notecase 1.2.3 has some more Zaurus-specific goodies:
Zaurus-friendly key shortcuts for example, which enable the used to rapidly create outlines without using the stylus at all. Saves a lot of time.
Together with the author, I am working on a version which can be used conveniently on the Zaurus.
There are still some usability issues, which will hopefully be solved in the near future.

daniel

[Capn_Fish]

I've compiled Battle for Mandicor (an RTS made on the Stratagus engine), and stripped out the sound to make a "lite" version. It's too big to post here, so can somebody host it?

If there's demand I can package up a full version.

Lite ~15 megs installed
Full ~30 megs installed

Thanks!

Edit: Here's a screenshot.

Attached File(s)

 bfm.png ( 902K ) Number of downloads: 334

 

[dtruchan]

window managa' bonanza
... for beta3

9wm - this is an X window manager which attempts to emulate the Plan 9 window manager 8-1/2.
 9wm_1.1_armv5tel.ipk ( 17.43K ) Number of downloads: 36


fvwm - you should know what fvwm is. without libstroke support.
 fvwm_2.5.18_armv5tel.ipk ( 2.61MB ) Number of downloads: 43


jwm - Joe's window manager is a simple Xlib-based window manager with sloppy focus and click-to-raise
 jwm_1.8_armv5tel.ipk ( 75.98K ) Number of downloads: 35


karmen - A simple window manager with a clean look. It doesn't need a config file and has no library dependencies other than Xlib.
 karmen_0.7_armv5tel.ipk ( 23.81K ) Number of downloads: 34


pwm - This is a lightweight window manager, which can frame multiple client windows within a single frame.
 pwm_1.0_armv5tel.ipk ( 54.9K ) Number of downloads: 31


ratpoison - A simple lightweight window manager with no fancy graphics or window decorations.
 ratpoison_1.4.0_armv5tel.ipk ( 69.99K ) Number of downloads: 29


waimea - A fast and highly customizable virtual desktop window manager, requires imlib2.
 waimea_0.4.0_armv5tel.ipk ( 182.25K ) Number of downloads: 36


wmii - a lightweight window manager that aims to combine the best features of larsWM, Ion, evilwm, and ratpoison.
 wmii_2.0_armv5tel.ipk ( 110.46K ) Number of downloads: 36


Nothing special here, these are just the default builds.
configuration is up to you.
let me know if you come up with anything cool.
enjoy.

[Capn_Fish]

FreeCnC for those who can try it (it appears to me that you need the game to play it). It's just the directory with the stuff in it, so untar it and run freecnc in the directory.

Attached File(s)

 freecnc.tar.gz ( 4.37MB ) Number of downloads: 416

 

[Antikx]

I've compiled Battle for Mandicor (an RTS made on the Stratagus engine), and stripped out the sound to make a "lite" version. It's too big to post here, so can somebody host it?

Here's the lite version:
http://www.tyrannozaurus.com/feed/bfm-lite....2_armv5tel.ipk
As I told Capn_Fish... its not a proper feed so just dload it and install it.

[zi99y]

Thanks for the stratagus mod, but I get the following error when I try to run it. Any ideas?


stratagus -d /mnt/ide/usr/local/share/bfm
MODEL:SL-C3200
Stratagus default config file loading ...

[string "/mnt/ide/usr/local/share/bfm/scripts/strata..."]:71: attempt to call global `SetMenuBackground' (a nil value)
stack traceback:
[string "/mnt/ide/usr/local/share/bfm/scripts/strata..."]:71: in main chunk

[deniscallies]

Hello Capn_Fish,

tried FreeCnC and it crashes with a SDL Parachute
do you have any hints?

thanks Denis