Sl-c3200 Full Hd “openbsd Hallelujah”, Andy Installation Guide C3200 Version Options

[hus]

Ok I got my new AmbiCom WL1100C-CF Wireless card and it works fine except something I would like you guys comment on it “ This Card gets over heated!“ in a way that’s really can’t hold it, I used to wireless cards heat, but not like this I feel it’s malfunction or something, would like to hear from you guys.

Anyway here the way to get Andy Full HD install for SL-C3200, basically following Andy installation guide as it is Andy Whole HD Guide

I replaced the kernel with tetsu kernel Tetsu 18h SL-C3200 Kernel also i replaced the updater.sh with this one
 updater.sh.txt ( 4.6K ) Number of downloads: 91


So the files now looks like this

CODE

fdisk
initrd.bin
zImage.bin  <==--- Replaced by Tetsu Kernel
updater.sh   <==--- Replaced by Updater.sh above

Following the guide as it is and after installing OpenBSD and before booting it there is another modification, i used the same method to log to emergency screen using B+D and insert the CF card and preform the following:

CODE

mkdir /mnt/mtdflash
mount /dev/mtdblock2 /mnt/mtdflash
cp /mnt/mtdflash/etc/pcmcia/config /mnt/cf

in your regular Linux/BSD computer (Or Windows with UltraEdit Text Editor) open the file that we just copy it, and replace all ide-cs pattern to be ide_cs.

replace the old file with the one you edit it (cp /mnt/cf/config /mnt/mtdflash/etc/pcmcia/config) now boot the new FULL HD OpenBSD

i hope this will help someone.

and yeah Andy could you plz release full HD image for SL-C3200? you start this guide it will be great to take it to another level, and thank you for all the information you share it with us.