 D-link Air Dcf-660w Wi-fi Cf, Troubles on OpenZaurus Opie 3.5.4.1 .... |
OESF Forums > Distros, Development, and Model Specific Forums > Model Specific Forums > 5x00 Hardware
  Oct 26 2006, 07:41 PM
Post
#1
|
|
|
Group: Members Posts: 12 Joined: 19-March 06 Member No.: 9,394  |
Hi
I have a D-Link Air DCF-660W Wi-Fi CF Card Using the Sharp ROM this card worked 99% of the time perfectly fine, recently I have finally managed to get the OpenZaurus opie image installed to my SD card and I now use that (thank you to everyone in #openzaurus who helped) However when I put my card in 1/10th of the time it will come up as Sandisk Connect SDWCFB-000 and the other 9/10ths of the time it will be 'Anonymous Memory' Now that is issue number one, issue number two is this. My wi-fi is set to auto discover, auto dhcp and most of the time when it shows up as a sandisk it gets the IP its supposed to get (the mac is registered with the router) of 192.168.0.9 and I can use OpieIRC to get on freenode connecting to irc.freenode.net I can also ping google.com from Konsole and upgrade packages from the feed using ipkg. However! Konquerer will only load pages when I give it the IP (e.g. 66.102.7.104 instead of google.com) and also Gaim does not work neither! Naturally it is resolving the irc.freenode.net host name on OpieIRC and i've no trouble with OpieIRC but on Konquerer... if u give it a domain then it just timesout. When it does show up as sandisk I get this for cardctl... CODE root@Assistant:/# cardctl info 0 PRODID_1="D-Link" PRODID_2="DCF-660W" PRODID_3="" PRODID_4="" MANFID=d601,0005 FUNCID=6 In the hostap_cs.conf the entry for that sandisk model looks like... CODE card "Sandisk Connect SDWCFB-000" manfid 0xd6-1, 0x0005 bind "hostap_cs" But I see no specific mention of the 660W model in the list! Any suggestions would be appreciated !!! ... |
 |
 
|
 |
Replies
|
Oct 27 2006, 06:07 AM
Post
#2
|
|
|
Group: Members Posts: 12 Joined: 19-March 06 Member No.: 9,394 |
So what about the issues pointed out with it?
|
|
|
|
|
Oct 27 2006, 07:22 AM
Post
#3
|
|
 Group: Members Posts: 118 Joined: 12-May 05 From: Oceanside,Ca Member No.: 7,121 |
QUOTE(Cyorxamp @ Oct 27 2006, 07:07 AM) So what about the issues pointed out with it?  Have you tried setting up USB networking? I know it's a pain to be tied to another computer, but this way you should be able to isolate the problem a little better. if konq works over usb, then it must be the WIFI, if it doesn't, i would blame konq... 
|
|
|
|
Posts in this topic
Cyorxamp D-link Air Dcf-660w Wi-fi Cf Oct 26 2006, 07:41 PM
Hrw 660w is same as that sandisk one so it does not ma... Oct 27 2006, 03:17 AM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 22nd May 2013 - 08:19 PM |