 Pppd Problem When Connecting With Audiovox |
 Feb 1 2007, 01:57 PM
Post
#1
|
|
|
Group: Members Posts: 385 Joined: 3-December 03 Member No.: 1,038  |
Hi,
when I try to connect to vodafone using the audiovox rtm 8000, I get myself stuck at the LCP negotiation; during the negotiation, no Rejection nor Nack responses appear, but negotiation doesn't go beyong the first step: waiting for connect... ATD*99***1# CONNECT Connected. If the following ppp negotiations fail, try restarting the phone. Serial connection established. using channel 62 Using interface ppp0 Connect: ppp0 <--> /dev/ttyS3 sent [LCP ConfReq id=0x1 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3c <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <pcomp> <accomp>] LCP: timeout sending Config-Requests Connection terminated. Any hints about proper settings in ppp files will be much appreciated. |
 |
 
|
 |
Replies
|
Mar 12 2007, 06:48 AM
Post
#2
|
|
|
Group: Members Posts: 454 Joined: 17-November 05 Member No.: 8,551 |
It would help if you posted the contents of your config files. Mine are in /etc/ppp/peers/ and in /etc/ppp/options.ttyS3
I had similar problems with dialup connections timing out. You might make sure the following line in your peers file isn't the problem. I had chosen too big a connect-delay. What's now working much better on dialup for me is: connect-delay 1000_ If that doesn't work, then make sure you post your files (without any private info) here so others with similar setups can compare theirs to yours. Oh, another thing, if you give the exact address rather than auto-detect, that may help, if you have that option. HTH, sdjf |
|
|
|
|
Apr 18 2008, 05:18 AM
Post
#3
|
|
|
Group: Members Posts: 2 Joined: 18-April 08 Member No.: 21,648 |
same problem here. I'm tyring to use an Audiovox RTM 8000 card on my HP hx4700 (arm based) running familiar linux 0.8.4, kernel is 2.6.15.
the card is correctly recognised, serial_cs is loaded, and the device maps to /dev/ttyS4, but I have to force the UART to 16550A and `cardctl reset`, or no program will be able to talk on the serial line. after that, I'm able to minicom out (also tried to call, and it works). but if I try to use ppp, it runs all right up to the LCP negotianion, where it gets stuck. here is my pppd script is: QUOTE(/etc/ppp/peers/cf-gprs) /dev/ttyS4 115200 connect '/usr/sbin/chat -v -f /etc/ppp/chat-cfgprs' defaultroute debug debug debug updetach usepeerdns noipdefault noauth name "internet" and my chat script: QUOTE(/etc/ppp/chat-cfgprs) ECHO ON 'ABORT' 'NO CARRIER' '' 'AT&F' 'OK' 'ATE1V1' 'OK' 'ATQ0' 'OK' 'AT+CGDCONT=1,"IP","web.omnitel.it"' 'OK' 'ATD*99#' 'CONNECT' '\d\c' (I already checked out with my service provider, and the values there are right.. I even could talk with an operator who really knew what I was talking about..) with these configs, I get the following: QUOTE(pppd output) # pppd call cf-gprs AT&F OK ATE1V1 OK ATQ0 OK AT+CGDCONT=1,"IP","web.omnitel.it" OK AT+CGATT=1 OK ATD*99# CONNECT Serial connection established. using channel 55 Using interface ppp0 Connect: ppp0 <--> /dev/ttyS4 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbfb925f> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbfb925f> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbfb925f> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbfb925f> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbfb925f> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbfb925f> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbfb925f> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbfb925f> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbfb925f> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfAck id=0x3 <auth pap> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbfb925f> <pcomp> <accomp>] Modem hangup Connection terminated. I read all the documentation I could find, and the most similar thing I found is the "Serial line is looped back" behaviour.. but it doesn't seem the case, as I never get that message. If I run through minicom the same AT commands that are in the chat script, I get: QUOTE(running through minicom) CONNECT ~�}#.!}!}$} },}#}$.#}'}"}(}"..~~�}#.!}!}$} },}#}$.#}'}"}(}"..~~�}#.!}!}$} },}#} thus it seems the connection is really initiated. last things to say:
|
|
|
|
Posts in this topic
zmiq2 Pppd Problem When Connecting With Audiovox Feb 1 2007, 01:57 PM
wiselynx QUOTE(wiselynx @ Apr 18 2008, 03:18 PM) s... Jul 3 2008, 05:37 AM
sdjf Oh, drat! My time to help with complex proble... Apr 18 2008, 02:58 PM sdjf If you have files in the following directory named... Apr 18 2008, 05:44 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 24th May 2013 - 12:51 AM |