Tkc/sharp 3.13 Roms W/ 2 Gig Sd/home Fix Options

[kb7sqi]

I figured I'd post this to the forums & clear up some misconceptions. First off, if you look back in the thread on the tkcrom w/ home on sd thread, I had posted back in November that I had modified the tkcroms v1 & v2 to use the modified 2 gig sd module and hadn't had any problems testing them. I also modified the stock sharp rom 3.13 the same way. I didn't really do anything special here. All I did was take the /root/etc/rc.d/rs.sysinit script from the TKC V2 ROM & put them in the other 2 roms. I also just swapped out the sd module for the newer one. Extracting the rom on a linux box is pretty simple & just copy'ing some files then doing a mkcramfs on the extracted directory. Nothing special. I just wanted to have that stuff in rom so I didn't have to add it after the fact. I'm attaching the initrd.bin files here so that way anyone can try them out. I also used the same prep-sd script mentioned in the tkcrom thread, version 5. I didn't modify it in anyway. Last thing. I've read in a few of the threads about trying to use the 2 gig sd module on other Z's. I don't recommend you try this. It's not going to work. If you searched the forums, you'll notice that the 5000/5500 Z's don't have a "standard" sd slot like the 5600 and above. That's why OZ versions prior to the 2.6 kernel had to use the same sd module that either came w/ the stock 5500 rom or the modified one mentioned above. I have 5 different Z's and I like them all, but I'll hardly claim to be an expert. I hope the files will be useful to someone. If you have any questions, feel free to add to the post.

Attached File(s)

 initrd.bin_sharprom3.13_sl5500.2g.sd.fix.gz ( 13.93MB ) Number of downloads: 168
 initrd.bin_sharprom3.13_sl5500.sd.home.2g.sd.fix.gz ( 13.93MB ) Number of downloads: 120

 

[tux]

I downloaded the attachments (please Santa can this problem with attachments be solved by this Christmas? ) and immediately ran into difficulties.

Are the files actually of type gz? If so what options did you use to tar them up.? My desktop gui archive manager says there is a problem and bottles out. If I fiddle about a bit I get an empty directory.

I suppose I could just substitute the updated/upgraded module by hand, but the initrd, especially with the version for sharprom to allow home on SD was very attractive!

Oh well, I suppose I should go and play with the command line and the downloaded files.

Cheers

[kb7sqi]

I downloaded the attachments (please Santa can this problem with attachments be solved by this Christmas? ) and immediately ran into difficulties.

Are the files actually of type gz? If so what options did you use to tar them up.? My desktop gui archive manager says there is a problem and bottles out. If I fiddle about a bit I get an empty directory.

I suppose I could just substitute the updated/upgraded module by hand, but the initrd, especially with the version for sharprom to allow home on SD was very attractive!

Oh well, I suppose I should go and play with the command line and the downloaded files.

Cheers

I gzip'ed them before uploading them. No tar, just ungzip them & then rename them to initrd.bin to flash them. Sorry, I guess I could've used zip, but I normally use gzip/bzip2 to compress files. I flashed the sharprom w/ 2gig sd module & /home on sd. It's been running fine for 24 hours now.

[chrisl]

I downloaded the attachments (please Santa can this problem with attachments be solved by this Christmas? ) and immediately ran into difficulties.

Are the files actually of type gz? If so what options did you use to tar them up.? My desktop gui archive manager says there is a problem and bottles out. If I fiddle about a bit I get an empty directory.

I suppose I could just substitute the updated/upgraded module by hand, but the initrd, especially with the version for sharprom to allow home on SD was very attractive!

Oh well, I suppose I should go and play with the command line and the downloaded files.

Cheers

I gzip'ed them before uploading them. No tar, just ungzip them & then rename them to initrd.bin to flash them. Sorry, I guess I could've used zip, but I normally use gzip/bzip2 to compress files. I flashed the sharprom w/ 2gig sd module & /home on sd. It's been running fine for 24 hours now.

I ended up downloading the roms a couple times. One problem I had was the gzip program that I have kept saying the .gz file was corrupted. So I ultimately downloaded another un-gzipper and it worked. My Z been going for an hour without problems with the modified Sharp ROM and the asyncio kernel..

Chris--

[tux]

Thanks for the info..

Just flashed and the ssh keys are being generated. I'll reboot with the SD card in to see if it still recognises my 512 card. Then I'll go and get a 2 gig card. Just to be lazy, will I need to mess about with the block sizes when I format it? Or can I just run the prep-home-sd script?

I'll catch you later.

Cheers

[chrisl]

Thanks for the info..

Just flashed and the ssh keys are being generated. I'll reboot with the SD card in to see if it still recognises my 512 card. Then I'll go and get a 2 gig card. Just to be lazy, will I need to mess about with the block sizes when I format it? Or can I just run the prep-home-sd script?

I'll catch you later.

Cheers

#su
#cd /mnt/cf
#./prep-home-sd.sh -s 20 -t -c

Wait a minute...didn't you come up with those directions three years ago in a previous post

But I do have a question for folks. I installed everything, ran the script and so far everything runs great. However, my Z no longer recognizes my Belkin wifi card. I plug it in and the green link light goes on, but the network app says there is no card. I've had this problem with the modified tkc rom as well. I am using a slightly different kernel, the asyncio kernel. However, this shouldn't change anything since it is the kernel used by the Sharp ROM with async enabled.

Any easy solutions?

Chris--