Angstrom Hangs With Soft Lockup Options

[Mainframe-junkie]

Hello friends,

after reading the thread abut the new image with PCMCIA support i decides to flash the image http://www.angstrom-distribution.org/unsta...ad.rootfs.jffs2,
after rebooting Simpad hangs with the following messages :

CODE

.udev/ already exists on the static /dev!                                        
Starting the hotplug events dispatcher udevd                                            
Synthesizing the initial hotplug events                                      
hostap_cs: Registered netdevice wifi0                                    
hostap_hw.c: INTERRUPT BEFORE DEVICE INIT!                                          
hostap_cs: index 0x01: , irq 1, io 0xc4800000-0xc480003f                                                        
wifi0: NIC: id=0x800c v1.0.0                            
wifi0: PRI: id=0x15 v1.1.1                          
wifi0: STA: id=0x1f v1.7.4                          
wifi0: NIC: id=0x800c v1.0.0                          
wifi0: PRI: id=0x15 v1.1.1                          
wifi0: STA: id=0x1f v1.7.4                          
Waiting for /dev to be fully populated                                      
Remounting root file system...                              
root: mount: special device /dev/mtdblock/2 does not exist                                                          
Setting up IP spoofing protection: rp_filter.                                            
Configuring network interfaces... SIOCGIFFLAGS: No such device                                                              
eth0      No such device                        

udhcpc (v1.2.1) started                      
udhcpc[2641]: udhcpc (v1.2.1) started                                    
SIOCGIFINDEX failed!: No such device                                    
udhcpc[2641]: SIOCGIFINDEX failed!: No such device                                                  
done.    
Starting portmap daemon: portmap.                                
BUG: soft lockup - CPU#0 stuck for 11s! [hwclock:2664]                                                      

Pid: 2664, comm:              hwclock                                    
CPU: 0    Not tainted  (2.6.24 #1)                                  
PC is at __do_softirq+0x4c/0xd0                              
LR is at __do_softirq+0x2c/0xd0                              
pc : [<c003d240>]    lr : [<c003d220>]    psr: 60000013                                                      
sp : c2c03d84  ip : c2c03d84  fp : c2c03d9c                                          
r10: c032d424  r9 : c2c02000  r8 : 00000002                                          
r7 : 00000003  r6 : 0000000a  r5 : c0358e5c  r4 : 00000022                                                          
r3 : 20000013  r2 : c0358e20  r1 : 00000104  r0 : 00000000                                                          
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment us                                                            
Control: c2c1b17f  Table: c2c1b17f  DAC: 00000015

I attach the logs for further information.  Simpad_boot.txt ( 22.72K ) Number of downloads: 6


Thanks for any suggestions and help

Oliver

[Mainframe-junkie]

Hello mr nice,

first of all thanks to all contributors (you, mr data, florian, woglinde .....)
I didn't look to the screen, only watched the console (Simpad layed on floor face down)....
Here is the output :

CODE

root@simpad:~$ cat /dev/rtc & cat /proc/interrupts
RTSR in rtc_open: 0
OIER in rtc_open: 1
OSSR in rtc_open: 0
           CPU0
  0:          0      GPIO-l  power button
17:        486          SC  sa11x0-uart
26:       8778          SC  SA11xx Timer Tick
27:          0          SC  rtc timer
30:          0          SC  rtc 1Hz
31:          0          SC  rtc Alrm
43:          0      GPIO-h  UCB1x00
45:          0      GPIO-h  CF_CD
Err:          0

after suspend/resume it was "dead" ...

CODE

root@simpad:~$ Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.02 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Suspending console(s)
U3WKUP

So we need to track down the resume process ....

Thanks and best regards

Oliver

 Simpad_03.24.125552.txt ( 8.82K ) Number of downloads: 1