OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

> Angstrom 2007.12-r14 - No Wpa Connection, WPA with NetGear MA401RA
Mainframe-junkie
post Apr 6 2008, 05:40 AM
Post #1





Group: Members
Posts: 15
Joined: 9-March 08
From: Ebbelwoi-Town
Member No.: 21,482



Hello friends,

i have installed the new stable image Angstrom-X11-2007.12-R14 from 1.April.
The first test showed an wrong script under /etc/network/if-pre-up.d/wpasupplicant (from Ubuntu, it fails with sed of busybox not knowing --quite) get called.
So i just linked wpa-supplicant to wpasupplicant.
When i try to connect to my WPA-WLAN with an NetGear MA-401RA (Firmware PRI v1.1.1, STA v1.8.2), it will get no connection.
The cards is ok, under simpad i can connect to an open WLAN.
My interfaces looks like
CODE
root@simpad:~$ cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo
iface lo inet loopback


# Wireless interfaces
#
#
iface wlan0 inet static
     address 192.168.2.7
     netmask 255.255.255.0
     network 192.168.2.0
     broadcast 192.168.2.255
     wpa-conf /etc/wpa_supplicant.conf
     wpa-driver hostap
#
#


and the content of wpa_supplicant.conf is

CODE
root@simpad:~$ cat /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
network={
    ssid="BlueZone"
    key_mgmt=WPA-PSK
    pairwise=TKIP
    group=TKIP
    psk="01234567890123"
    priority=1
}
network={
    ssid="carioca"
    key_mgmt=NONE
    priority=2
}


I can see my WLAN with iwlist scan :

CODE
wlan0     Scan completed :
          Cell 01 - Address: 00:04:0E:D4:F4:B1
                    ESSID:"BlueZone"
                    Mode:Master
                    Frequency:2.422 GHz (Channel 3)
                    Signal level=-68 dBm  Noise level=-89 dBm
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
                    Extra:bcn_int=100
                    Extra:resp_rate=10
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK


In /var/log/messages i only found :

CODE
....
Apr  6 13:54:14 simpad user.debug kernel: prism2: wlan0: operating mode changed 3 -> 2
Apr  6 13:54:14 simpad user.info kernel: NET: Registered protocol family 17
Apr  6 13:54:14 simpad user.debug kernel: wifi0: LinkStatus=2 (Disconnected)
Apr  6 13:54:14 simpad user.debug kernel: wifi0: LinkStatus: BSSID=44:44:44:44:44:44
Apr  6 13:54:15 simpad user.notice root: Checking for WLAN association...
Apr  6 13:54:15 simpad user.notice root: Found association!
Apr  6 13:54:15 simpad user.debug kernel: wifi0: LinkStatus=2 (Disconnected)
Apr  6 13:54:15 simpad user.debug kernel: wifi0: LinkStatus: BSSID=44:44:44:44:44:44
Apr  6 13:54:15 simpad user.debug kernel: wlan0: Trying to join BSSID 00:04:0e:d4:f4:b1
Apr  6 13:54:15 simpad daemon.info avahi-daemon[2702]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.2.7.
Apr  6 13:54:15 simpad daemon.info avahi-daemon[2702]: New relevant interface wlan0.IPv4 for mDNS.
Apr  6 13:54:15 simpad daemon.info avahi-daemon[2702]: Registering new address record for 192.168.2.7 on wlan0.IPv4.
Apr  6 13:54:15 simpad user.debug kernel: wifi0: LinkStatus=6 (Association failed)
....


My router is an Fritz!Box and another embedded linux device, my iLiad (e-book from iRex) is working fine with WPA-WLAN.
I'm shure my psk is ok, because it contains only digits [0-9] like above ... wink.gif

Attached is an log of the session with output of various commands (iwconfig, ifconfig, iwscan, lsmod etc.) and more content of /var/log/messages

Did anyone run succsessfully WPA with Angstrom 2007.12 on simpad ?
Or any guesses what else to try/check/do ...???

Best regards and thanks to all which work on Angstrom for Simpad

Oliver

Attached File  Simpad_04.06.135001.txt ( 31.8K ) Number of downloads: 1

Edit : changed Topic description
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
Mainframe-junkie
post Apr 6 2008, 01:56 PM
Post #2





Group: Members
Posts: 15
Joined: 9-March 08
From: Ebbelwoi-Town
Member No.: 21,482



Hello mr_nice,

after insertion of my WLAN-Card an lsmod looks like this

CODE
root@simpad:~$ lsmod
Module                  Size  Used by
af_packet              24420  2
hostap_cs              62616  1
hostap                113028  1 hostap_cs
ieee80211_crypt         6464  1 hostap
rfcomm                 43860  0
ircomm_tty             41224  0
ircomm                 24420  1 ircomm_tty
irda                  204172  2 ircomm_tty,ircomm
crc_ccitt               2016  1 irda
hidp                   20672  0
hid                    34852  1 hidp
l2cap                  26116  10 rfcomm,hidp
bluetooth              63812  5 rfcomm,hidp,l2cap
root@simpad:~$


All the cypto modules exept of ieee80211_crypt missing ...
No better results even after loading the missing stuff via modprobe Attached File  Simpad_04.07.000242.txt ( 19.84K ) Number of downloads: 2

Best regards

Oliver
Go to the top of the page
 
+Quote Post

Posts in this topic
Mainframe-junkie   Angstrom 2007.12-r14 - No Wpa Connection   Apr 6 2008, 05:40 AM
mister_data   QUOTE(Mainframe-junkie @ Apr 6 2008, 02...   Apr 6 2008, 06:48 AM
Mainframe-junkie   Hello mrdata, changed the wpa_supplicant.conf but...   Apr 6 2008, 07:09 AM
mister_data   QUOTE(Mainframe-junkie @ Apr 6 2008, 04...   Apr 6 2008, 07:37 AM
Mainframe-junkie   Hello mrdata, moved the file away, but still no c...   Apr 6 2008, 09:21 AM
Capn_Fish   There's been some talk on the mailing list abo...   Apr 6 2008, 10:04 AM
Mainframe-junkie   Thanks Capn_Fish, i found the thread about ...   Apr 6 2008, 11:46 AM
mr_nice   QUOTE(Mainframe-junkie @ Apr 6 2008, 11...   Apr 6 2008, 01:28 PM
Mainframe-junkie   Hello mr_nice, after insertion of my WLAN-Card an...   Apr 6 2008, 01:56 PM
ofels   QUOTE(Mainframe-junkie @ Apr 6 2008, 11...   Apr 6 2008, 11:14 PM
mr_nice   Can you try to use the card on another device like...   Apr 8 2008, 06:41 AM
Mainframe-junkie   Hello mr_nice, i took an Knoppix 5.3 (DVD from c...   Apr 9 2008, 07:45 AM
hafu   I also have a Netgear MA401 and I can confirm that...   May 26 2008, 08:38 AM
mr_nice   QUOTE(hafu @ May 26 2008, 08:38 AM) I als...   May 28 2008, 02:05 PM
hafu   I can confirm that Netgear MA401 is working with W...   Jun 4 2008, 04:59 AM
mr_nice   Glad to hear that . Which firmware release did you...   Jun 7 2008, 02:50 AM
hafu   used firmware: with the r15, it works immediately ...   Jun 7 2008, 12:52 PM
mr_nice   QUOTE(hafu @ Jun 7 2008, 12:52 PM) one mo...   Jun 10 2008, 07:11 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 12th July 2014 - 04:15 PM