Angstrom 2007.12-r14 - No Wpa Connection, WPA with NetGear MA401RA Options

[Mainframe-junkie]

Hello friends,

i have installed the new stable image Angstrom-X11-2007.12-R14 from 1.April.
The first test showed an wrong script under /etc/network/if-pre-up.d/wpasupplicant (from Ubuntu, it fails with sed of busybox not knowing --quite) get called.
So i just linked wpa-supplicant to wpasupplicant.
When i try to connect to my WPA-WLAN with an NetGear MA-401RA (Firmware PRI v1.1.1, STA v1.8.2), it will get no connection.
The cards is ok, under simpad i can connect to an open WLAN.
My interfaces looks like

CODE

root@simpad:~$ cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
auto lo
iface lo inet loopback


# Wireless interfaces
#
#
iface wlan0 inet static
     address 192.168.2.7
     netmask 255.255.255.0
     network 192.168.2.0
     broadcast 192.168.2.255
     wpa-conf /etc/wpa_supplicant.conf
     wpa-driver hostap
#
#

and the content of wpa_supplicant.conf is

CODE

root@simpad:~$ cat /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
network={
    ssid="BlueZone"
    key_mgmt=WPA-PSK
    pairwise=TKIP
    group=TKIP
    psk="01234567890123"
    priority=1
}
network={
    ssid="carioca"
    key_mgmt=NONE
    priority=2
}

I can see my WLAN with iwlist scan :

CODE

wlan0     Scan completed :
          Cell 01 - Address: 00:04:0E:D4:F4:B1
                    ESSID:"BlueZone"
                    Mode:Master
                    Frequency:2.422 GHz (Channel 3)
                    Signal level=-68 dBm  Noise level=-89 dBm
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
                    Extra:bcn_int=100
                    Extra:resp_rate=10
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK

In /var/log/messages i only found :

CODE

....
Apr  6 13:54:14 simpad user.debug kernel: prism2: wlan0: operating mode changed 3 -> 2
Apr  6 13:54:14 simpad user.info kernel: NET: Registered protocol family 17
Apr  6 13:54:14 simpad user.debug kernel: wifi0: LinkStatus=2 (Disconnected)
Apr  6 13:54:14 simpad user.debug kernel: wifi0: LinkStatus: BSSID=44:44:44:44:44:44
Apr  6 13:54:15 simpad user.notice root: Checking for WLAN association...
Apr  6 13:54:15 simpad user.notice root: Found association!
Apr  6 13:54:15 simpad user.debug kernel: wifi0: LinkStatus=2 (Disconnected)
Apr  6 13:54:15 simpad user.debug kernel: wifi0: LinkStatus: BSSID=44:44:44:44:44:44
Apr  6 13:54:15 simpad user.debug kernel: wlan0: Trying to join BSSID 00:04:0e:d4:f4:b1
Apr  6 13:54:15 simpad daemon.info avahi-daemon[2702]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.2.7.
Apr  6 13:54:15 simpad daemon.info avahi-daemon[2702]: New relevant interface wlan0.IPv4 for mDNS.
Apr  6 13:54:15 simpad daemon.info avahi-daemon[2702]: Registering new address record for 192.168.2.7 on wlan0.IPv4.
Apr  6 13:54:15 simpad user.debug kernel: wifi0: LinkStatus=6 (Association failed)
....

My router is an Fritz!Box and another embedded linux device, my iLiad (e-book from iRex) is working fine with WPA-WLAN.
I'm shure my psk is ok, because it contains only digits [0-9] like above ...

Attached is an log of the session with output of various commands (iwconfig, ifconfig, iwscan, lsmod etc.) and more content of /var/log/messages

Did anyone run succsessfully WPA with Angstrom 2007.12 on simpad ?
Or any guesses what else to try/check/do ...???

Best regards and thanks to all which work on Angstrom for Simpad

Oliver

 Simpad_04.06.135001.txt ( 31.8K ) Number of downloads: 1

Edit : changed Topic description

[hafu]

I can confirm that Netgear MA401 is working with WPA in release r14 as well as r15.
My only problem was my outdated prism firmware. After updating it with the prism2_srec command it works very well.
-hafu

for reference:

CODE

root@simpad:~$ lsmod
Module Size Used by
michael_mic 2560 6
arc4 1920 6
ecb 3648 6
ieee80211_crypt_tkip 11552 0
af_packet 24420 4
hostap_cs 62616 3
hostap 113028 1 hostap_cs
ieee80211_crypt 6464 2 ieee80211_crypt_tkip,hostap
rfcomm 43860 0
ircomm_tty 41224 0
ircomm 24420 1 ircomm_tty
irda 204172 2 ircomm_tty,ircomm
crc_ccitt 2016 1 irda
hidp 20672 0
hid 34852 1 hidp
l2cap 26116 10 rfcomm,hidp
bluetooth 63812 5 rfcomm,hidp,l2cap

[mr_nice]

Glad to hear that .
Which firmware release did you use?

best regards
nice