Kernel Conf File For Kernel 2.6.24.4-yonggun, I've solution provided for cross compile Options

[abm_y4k]

Can someone provide me the kernel config file for this kernel version?

If possible the patches as well?

I am trying to rebuild the kernel for hostap injection support with PRISM2_DOWNLOAD_SUPPORT enable.


Thanks,

[abm_y4k]

Hi,

I've successfully recompiled the kernel and the hostap driver for injection with firmware upgradeable.

It seems hard to find a proper way to do the cross compile so I'll like to share my steps with you all.

CODE

wget http://www.codesourcery.com/gnu_toolchains/arm/portal/package2549/public/arm-none-linux-gnueabi/arm-2008q1-126-arm-none-linux-gnueabi-i686-pc-linu
x-gnu.tar.bz2

tar xjf arm-2008q1-126-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2

mv arm-2008q1 /usr/local

export PATH=/usr/local/arm-2008q1/bin/:$PATH

cd /usr/src

*download the kernel conf and patch file from http://yonggun.tistory.com/66
*save the kernel source to /usr/src

tar zxvf kernel-2.6.6.24.4.tar.gz

mv config linux-2.6.24.4/.config

cd /usr/src/linux-2.6.24.4

make zImage ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-

make modules ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-

make modules_install

* kernel should be in /usr/src/linux-2.6.24.4/arch/arm/boot/zImage
* modules should be in /lib/modules/
* make sure flash the kernel with the newly built modules

This might be very helpful for many ppl, forum admin should consider sticky this.
Thanks,

[LinuxGadget]

Hi,

I've successfully recompiled the kernel and the hostap driver for injection with firmware upgradeable.

It seems hard to find a proper way to do the cross compile so I'll like to share my steps with you all.

CODE

wget http://www.codesourcery.com/gnu_toolchains/arm/portal/package2549/public/arm-none-linux-gnueabi/arm-2008q1-126-arm-none-linux-gnueabi-i686-pc-linu
x-gnu.tar.bz2

tar xjf arm-2008q1-126-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2

mv arm-2008q1 /usr/local

export PATH=/usr/local/arm-2008q1/bin/:$PATH

cd /usr/src

*download the kernel conf and patch file from http://yonggun.tistory.com/66
*save the kernel source to /usr/src

tar zxvf kernel-2.6.6.24.4.tar.gz

mv config linux-2.6.24.4/.config

cd /usr/src/linux-2.6.24.4

make zImage ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-

make modules ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-

make modules_install

* kernel should be in /usr/src/linux-2.6.24.4/arch/arm/boot/zImage
* modules should be in /lib/modules/
* make sure flash the kernel with the newly built modules

This might be very helpful for many ppl, forum admin should consider sticky this.
Thanks,

Been looking for this for such a long time , will give it a try on the weekend.
Thanks so much!