Compiling Qt Programs For Angstrom With Opie

Compiling Qt Programs For Angstrom With Opie

BerndS View Member Profile	Jan 21 2009, 12:37 PM Post #1
Group: Members Posts: 65 Joined: 26-September 04 Member No.: 4,770	Hi, which packages do I need to compile Qt3 programs for Angstrom/Opie ? And where can I get them? (I want to compile portabase for Angstrom with Opie) regards Bernd

Replies

ofels View Member Profile	Jan 22 2009, 02:31 AM Post #2
Group: Members Posts: 139 Joined: 4-December 06 From: Lake Constance, Germany Member No.: 13,087	QUOTE(BerndS @ Jan 21 2009, 09:37 PM) Hi, which packages do I need to compile Qt3 programs for Angstrom/Opie ? And where can I get them? (I want to compile portabase for Angstrom with Opie) Given the fact that opie completely relies on qte 2.3.x you need a very good programmer who ports the missing qt3 functionality to qt2. Though last time I checked portabase was based on qt2, not qt3. And if you want to build angstrom packages, why don't you hop over to http://www.openembedded.org and read the "Getting Started" instructions ? Oliver

BerndS View Member Profile	Jan 22 2009, 10:15 AM Post #3
Group: Members Posts: 65 Joined: 26-September 04 Member No.: 4,770	QUOTE(ofels @ Jan 22 2009, 11:31 AM) QUOTE(BerndS @ Jan 21 2009, 09:37 PM) Hi, which packages do I need to compile Qt3 programs for Angstrom/Opie ? And where can I get them? (I want to compile portabase for Angstrom with Opie) Given the fact that opie completely relies on qte 2.3.x you need a very good programmer who ports the missing qt3 functionality to qt2. Though last time I checked portabase was based on qt2, not qt3. ok, then I need packages with the libraries and tools for qt2. QUOTE And if you want to build angstrom packages, why don't you hop over to http://www.openembedded.org and read the "Getting Started" instructions ? Already been there - but I did not find the infos I want. I do not want to write new programs for Opie or create a new image - just compile the existing Portabase for Opie on my Zaurus. Bernd

ofels View Member Profile	Jan 22 2009, 01:04 PM Post #4
Group: Members Posts: 139 Joined: 4-December 06 From: Lake Constance, Germany Member No.: 13,087	QUOTE(BerndS @ Jan 22 2009, 07:15 PM) QUOTE And if you want to build angstrom packages, why don't you hop over to http://www.openembedded.org and read the "Getting Started" instructions ? Already been there - but I did not find the infos I want. I do not want to write new programs for Opie or create a new image - just compile the existing Portabase for Opie on my Zaurus. In that case you missed the point. OE is a complete build system for automatically building the software be it the whole Angstrom distribution or only packages. In any case it fetches the required dependencies and sets up the cross compiling system. If you want to build a package for Angstrom there is no good way around setting up OE. Oliver

BerndS View Member Profile	Jan 23 2009, 10:33 AM Post #5
Group: Members Posts: 65 Joined: 26-September 04 Member No.: 4,770	QUOTE(ofels @ Jan 22 2009, 10:04 PM) In that case you missed the point. OE is a complete build system for automatically building the software be it the whole Angstrom distribution or only packages. In any case it fetches the required dependencies and sets up the cross compiling system. If you want to build a package for Angstrom there is no good way around setting up OE. ok; but then: How can I build the binaries for an application for OPIE? From the other messages in this thread I read that Portabase should run under OPIE -- if I only could compile it. regards Bernd

ofels View Member Profile	Jan 23 2009, 12:47 PM Post #6
Group: Members Posts: 139 Joined: 4-December 06 From: Lake Constance, Germany Member No.: 13,087	QUOTE(BerndS @ Jan 23 2009, 07:33 PM) ok; but then: How can I build the binaries for an application for OPIE? From the other messages in this thread I read that Portabase should run under OPIE -- if I only could compile it. Bernd, the build process is completety described in the Angstrom and OE wiki and Getting Started sections. Once you have set up OE it is as simple as calling "bitbake portabase" However be aware that nobody has build portabase for a while- as it requires several dependencies they might have broken in the meantime and are then not compatible any more with the current Angstrom version. In that case some hacking is required. Oliver

BerndS View Member Profile	Jan 26 2009, 02:55 PM Post #7
Group: Members Posts: 65 Joined: 26-September 04 Member No.: 4,770	Oliver, after rereading the Angstrom and OE wiki I installed bitbake on my Thinkpad running Ubuntu (Hardy Heron). And in principle it works -- after installing and configuring bitbake like described here http://wiki.openembedded.net/index.php/Getting_Started a "bitbake opie-image" created a new image and "bitbake portabase" created a portabase package file. Perfect... Then I created a new directory to create the image for angstrom-2007.1 and a Portabase package for my current Opie environment on the Zaurus like it's described here http://www.angstrom-distribution.org/building-angstrom. In this directory bitbake does not work as expected; I always get the error message [angstrom-2007.1] xtrnaw7@t61p:/data/develop/oe/angstrom-2007.1/org.openembedded.stable$ bitbake opie-image NOTE: Out of date cache found, rebuilding... NOTE: Handling BitBake files: \| (4976/4976) [100 %] NOTE: Parsing finished. 0 cached, 4751 parsed, 225 skipped, 0 masked. NOTE: build 200901262327: started OE Build Configuration: BB_VERSION = "1.8.12" OE_REVISION = "<unknown>" TARGET_ARCH = "arm" TARGET_OS = "linux-gnueabi" MACHINE = "c7x0" DISTRO = "angstrom" DISTRO_VERSION = "2007.12-r19" TARGET_FPU = "soft" NOTE: Resolving any missing task queue dependencies NOTE: preferred version 2.5 of glibc not available (for item virtual/arm-angstrom-linux-gnueabi-libc-for-gcc) ERROR: '[]' RDEPENDS/RRECOMMENDS or otherwise requires the runtime entity 'virtual/arm-angstrom-linux-gnueabi-gcc-2.95' but it wasn't found in any PACKAGE or RPROVIDES variables NOTE: Runtime target 'virtual/arm-angstrom-linux-gnueabi-gcc-2.95' is unbuildable, removing... Missing or unbuildable dependency chain was: ['virtual/arm-angstrom-linux-gnueabi-gcc-2.95'] (and some other error messages which are follow-up errors I think). My local.conf file is DL_DIR = "/data/develop/oe/angstrom-2007.1/sources" BBFILES = "/data/develop/oe/angstrom-2007.1/org.openembedded.stable/packages//.bb" BBMASK = "" CCACHE="" PREFERRED_PROVIDERS = "virtual/qte:qte virtual/libqpe:libqpe-opie" PREFERRED_PROVIDERS += " virtual/libsdl:libsdl-x11" PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial" PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-intermediate:gcc-cross-intermediate" PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross" PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross" TMPDIR = "/data/develop/oe/angstrom-2007.1/oetmp" MACHINE = "c7x0" DISTRO = "angstrom-2007.1" IMAGE_FSTYPES = "jffs2 tar.gz" BBINCLUDELOGS = "yes" and BBPATH is [angstrom-2007.1] xtrnaw7@t61p:/data/develop/oe/angstrom-2007.1/org.openembedded.stable$ echo $BBPATH /data/develop/oe/angstrom-2007.1/build:/data/develop/oe/angstrom-2007.1/org.openembedded.stable Unfortunately the documentation for bitbake is not that good so I'm lost here .. Any clues? regards Bernd Update: Just read in a message that this message can be ignored ... therefor I add all messages I get: [angstrom-2007.1] xtrnaw7@t61p:/data/develop/oe/angstrom-2007.1/build$ bitbake opie-image NOTE: Handling BitBake files: \| (4976/4976) [100 %] NOTE: Parsing finished. 4750 cached, 1 parsed, 225 skipped, 0 masked. NOTE: build 200901270958: started OE Build Configuration: BB_VERSION = "1.8.12" OE_REVISION = "<unknown>" TARGET_ARCH = "arm" TARGET_OS = "linux-gnueabi" MACHINE = "c7x0" DISTRO = "angstrom" DISTRO_VERSION = "2007.12-r19" TARGET_FPU = "soft" NOTE: Resolving any missing task queue dependencies NOTE: preferred version 2.5 of glibc not available (for item virtual/arm-angstrom-linux-gnueabi-libc-for-gcc) ERROR: '[]' RDEPENDS/RRECOMMENDS or otherwise requires the runtime entity 'virtual/arm-angstrom-linux-gnueabi-gcc-2.95' but it wasn't found in any PACKAGE or RPROVIDES variables NOTE: Runtime target 'virtual/arm-angstrom-linux-gnueabi-gcc-2.95' is unbuildable, removing... Missing or unbuildable dependency chain was: ['virtual/arm-angstrom-linux-gnueabi-gcc-2.95'] ERROR: '[]' RDEPENDS/RRECOMMENDS or otherwise requires the runtime entity 'collie-kernel-64-0' but it wasn't found in any PACKAGE or RPROVIDES variables NOTE: Runtime target 'collie-kernel-64-0' is unbuildable, removing... Missing or unbuildable dependency chain was: ['collie-kernel-64-0'] ERROR: '[]' RDEPENDS/RRECOMMENDS or otherwise requires the runtime entity 'collie-kernel-24-8' but it wasn't found in any PACKAGE or RPROVIDES variables NOTE: Runtime target 'collie-kernel-24-8' is unbuildable, removing... Missing or unbuildable dependency chain was: ['collie-kernel-24-8'] ERROR: '[]' RDEPENDS/RRECOMMENDS or otherwise requires the runtime entity 'collie-kernel-32-0' but it wasn't found in any PACKAGE or RPROVIDES variables NOTE: Runtime target 'collie-kernel-32-0' is unbuildable, removing... Missing or unbuildable dependency chain was: ['collie-kernel-32-0'] ERROR: '[]' RDEPENDS/RRECOMMENDS or otherwise requires the runtime entity 'collie-kernel-32-32' but it wasn't found in any PACKAGE or RPROVIDES variables NOTE: Runtime target 'collie-kernel-32-32' is unbuildable, removing... Missing or unbuildable dependency chain was: ['collie-kernel-32-32'] ERROR: '[]' RDEPENDS/RRECOMMENDS or otherwise requires the runtime entity 'collie-kernel-40-24' but it wasn't found in any PACKAGE or RPROVIDES variables NOTE: Runtime target 'collie-kernel-40-24' is unbuildable, removing... Missing or unbuildable dependency chain was: ['collie-kernel-40-24'] ERROR: '[]' RDEPENDS/RRECOMMENDS or otherwise requires the runtime entity 'collie-kernel-48-16' but it wasn't found in any PACKAGE or RPROVIDES variables NOTE: Runtime target 'collie-kernel-48-16' is unbuildable, removing... Missing or unbuildable dependency chain was: ['collie-kernel-48-16'] ERROR: '[]' RDEPENDS/RRECOMMENDS or otherwise requires the runtime entity 'collie-kernel-58-6' but it wasn't found in any PACKAGE or RPROVIDES variables NOTE: Runtime target 'collie-kernel-58-6' is unbuildable, removing... Missing or unbuildable dependency chain was: ['collie-kernel-58-6'] ERROR: '[]' RDEPENDS/RRECOMMENDS or otherwise requires the runtime entity 'pango-directfb' but it wasn't found in any PACKAGE or RPROVIDES variables NOTE: Runtime target 'pango-directfb' is unbuildable, removing... Missing or unbuildable dependency chain was: ['pango-directfb'] NOTE: Preparing runqueue NOTE: Executing runqueue NOTE: Running task 6 of 2467 (ID: 19, /data/develop/oe/angstrom-2007.1/org.openembedded.stable/packages/shasum/shasum-native.bb, do_compile) NOTE: package shasum-native-1.0: started NOTE: package shasum-native-1.0-r1: task do_compile: started ERROR: function do_compile failed ERROR: log data follows (/data/develop/oe/angstrom-2007.1/oetmp/work/x86_64-linux/shasum-native-1.0-r1/temp/log.do_compile.16666) \| collect2: cannot find 'ld' NOTE: Task failed: /data/develop/oe/angstrom-2007.1/oetmp/work/x86_64-linux/shasum-native-1.0-r1/temp/log.do_compile.16666 NOTE: package shasum-native-1.0-r1: task do_compile: failed ERROR: TaskFailed event exception, aborting NOTE: package shasum-native-1.0: failed ERROR: Build of /data/develop/oe/angstrom-2007.1/org.openembedded.stable/packages/shasum/shasum-native.bb do_compile failed ERROR: Task 19 (/data/develop/oe/angstrom-2007.1/org.openembedded.stable/packages/shasum/shasum-native.bb, do_compile) failed NOTE: Tasks Summary: Attempted 5 tasks of which 5 didn't need to be rerun and 1 failed. ERROR: '/data/develop/oe/angstrom-2007.1/org.openembedded.stable/packages/shasum/shasum-native.bb' failed NOTE: build 200901270958: completed [angstrom-2007.1] xtrnaw7@t61p:/data/develop/oe/angstrom-2007.1/build$

Posts in this topic

BerndS Compiling Qt Programs For Angstrom With Opie Jan 21 2009, 12:37 PM

Capn_Fish Searching here: http://www.angstrom-distribution.o... Jan 21 2009, 02:41 PM

ofels QUOTE(BerndS @ Jan 21 2009, 09:37 PM) Hi,... Jan 22 2009, 02:31 AM

BerndS QUOTE(ofels @ Jan 22 2009, 11:31 AM) QUOT... Jan 22 2009, 10:15 AM

ofels QUOTE(BerndS @ Jan 22 2009, 07:15 PM) QUO... Jan 22 2009, 01:04 PM

BerndS QUOTE(ofels @ Jan 22 2009, 10:04 PM) In t... Jan 23 2009, 10:33 AM

ofels QUOTE(BerndS @ Jan 23 2009, 07:33 PM) ok;... Jan 23 2009, 12:47 PM

BerndS Oliver, after rereading the Angstrom and OE wiki ... Jan 26 2009, 02:55 PM

ofels The error is here: QUOTE(BerndS @ Jan 26 200... Jan 27 2009, 12:48 PM

BerndS QUOTE(ofels @ Jan 27 2009, 09:48 PM) The ... Jan 27 2009, 02:09 PM

BerndS Hi I got it working! With bitbake version 1.... Jan 28 2009, 09:42 AM

« Next Oldest · Angstrom & OpenZaurus · Next Newest »

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)

0 Members: