How To Setup Irda-ppp? (sonyericsson K608i+c3200 Cacko 1.23), Looking also for the right INIT-String Options

[beckerb]

Hi folks,

I am still trying to set up an IrdA-PPP connection between my Sony Ericsson k608i (somewhat dated.....just like the Zaurus:)) and my newly acquired SL C-3200.

I had the same Sony Ericsson k608i connected to my old Psion 5mxPro which always worked.

But I have never used IrdA-PPP on the Zaurus, so if somebody can give me a comprehensive general introduction, that would be appreciated as well!

So far I have tried following init-strings:

at e0<cr>at+cgatt=0<cr>at+cgdcont=3,"ip","drei.at" or AT+CGDCONT=1,"IP","drei.at","0.0.0.0",0,0

and

AT+CGDCONT=1,"IP","drei.at","0.0.0.0",0,0


My provider is in Austria called "Drei", and the APN is on first place on my phone.

On my Psion I only had to type in the calling number which was: *99***1#, do I need to put this at the "phone" line in the network connection?????

Are there any other suggestions????

Thanks: Balazs

[speculatrix]

p.s. if you simply dial the ~99~ it will, in general, choose the default APN set in the phone, you normally override it with the AT+CGDCONT just before dialling.