OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Openbsd 5.5/zaurus : X Does Not Work With Default Config
teh.sean
post May 5 2014, 06:39 AM
Post #1





Group: Members
Posts: 77
Joined: 23-April 08
From: Cleveland, OH USA
Member No.: 21,673



TronDD and I have noticed an issue running X on 5.5 release. From my experience before, Zaurus' X server 'just worked' without any necessary configuration.
Running startx results in black screen for a few seconds, and then a return to the console. Anyone else noticing the same behavior?

Xorg.0.log:
CODE
[ 872.326] (--) Using wscons driver on /dev/ttyC1 in pcvt compatibility mode (version 3.32)
[ 872.811]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 872.953] X Protocol Version 11, Revision 0
[ 873.025] Build Operating System: OpenBSD 5.5 zaurus
[ 873.099] Current Operating System: OpenBSD zaurus.questforless.com 5.5 GENERIC#4 zaurus
[ 873.179] Build Date: 12 March 2014 04:22:05AM
[ 873.250]
[ 873.323] Current version of pixman: 0.32.4
[ 873.394] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 873.394] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 873.728] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 4 21:52:41 2014
[ 873.888] (==) Using config file: "/etc/X11/xorg.conf"
[ 873.916] (==) No Layout section. Using the first Screen section.
[ 873.917] (==) No screen section available. Using defaults.
[ 873.918] (**) |-->Screen "Default Screen Section" (0)
[ 873.919] (**) | |-->Monitor "<default monitor>"
[ 874.001] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 874.002] (**) | |-->Device "Wsdisplay0"
[ 874.003] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 874.005] (==) Disabling SIGIO handlers for input devices
[ 874.006] (==) Automatically adding devices
[ 874.007] (==) Automatically enabling devices
[ 874.007] (==) Not automatically adding GPU devices
[ 874.584] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 874.584] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 874.584] (II) The server relies on wscons to provide the list of input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[ 874.585] (II) Loader magic: 0x1ebc74
[ 874.586] (II) Module ABI versions:
[ 874.586] X.Org ANSI C Emulation: 0.4
[ 874.586] X.Org Video Driver: 14.1
[ 874.587] X.Org XInput driver : 19.1
[ 874.587] X.Org Server Extension : 7.0
[ 874.715] Initializing built-in extension Generic Event Extension
[ 874.787] Initializing built-in extension SHAPE
[ 874.859] Initializing built-in extension MIT-SHM
[ 874.931] Initializing built-in extension XInputExtension
[ 875.003] Initializing built-in extension XTEST
[ 875.075] Initializing built-in extension BIG-REQUESTS
[ 875.147] Initializing built-in extension SYNC
[ 875.219] Initializing built-in extension XKEYBOARD
[ 875.291] Initializing built-in extension XC-MISC
[ 875.363] Initializing built-in extension SECURITY
[ 875.436] Initializing built-in extension XINERAMA
[ 875.508] Initializing built-in extension XFIXES
[ 875.580] Initializing built-in extension RENDER
[ 875.652] Initializing built-in extension RANDR
[ 875.724] Initializing built-in extension COMPOSITE
[ 875.796] Initializing built-in extension DAMAGE
[ 875.868] Initializing built-in extension MIT-SCREEN-SAVER
[ 875.941] Initializing built-in extension DOUBLE-BUFFER
[ 876.013] Initializing built-in extension RECORD
[ 876.085] Initializing built-in extension DPMS
[ 876.158] Initializing built-in extension X-Resource
[ 876.230] Initializing built-in extension XVideo
[ 876.303] Initializing built-in extension XVideo-MotionCompensation
[ 876.375] Initializing built-in extension XFree86-VidModeExtension
[ 876.447] Initializing built-in extension XFree86-DGA
[ 876.520] Initializing built-in extension XFree86-DRI
[ 876.592] Initializing built-in extension DRI2
[ 876.593] (II) LoadModule: "glx"
[ 876.680] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 876.829] (II) Module glx: vendor="X.Org Foundation"
[ 876.830] compiled for 1.14.5, module version = 1.0.0
[ 876.830] ABI class: X.Org Server Extension, version 7.0
[ 876.831] (==) AIGLX enabled
[ 876.920] Loading extension GLX
[ 876.921] (II) LoadModule: "wsfb"
[ 876.926] (II) Loading /usr/X11R6/lib/modules/drivers/wsfb_drv.so
[ 876.961] (II) Module wsfb: vendor="X.Org Foundation"
[ 876.962] compiled for 1.14.5, module version = 0.4.1
[ 876.962] ABI class: X.Org Video Driver, version 14.1
[ 876.964] (II) wsfb: driver for wsdisplay framebuffer: wsfb
[ 876.965] (WW) Falling back to old probe method for wsfb
[ 877.000] (II) wsfb(0): using /dev/ttyC1
[ 877.004] (EE) Segmentation fault at address 0x10
[ 877.078] (EE)
Fatal server error:
[ 877.148] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 877.221] (EE)
[ 877.293] (EE)

Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 877.361] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 877.432] (EE)
[ 877.582] (EE) Server terminated with error (1). Closing log file.


/etc/xorg.conf:
CODE
# $OpenBSD: xorg.conf,v 1.5 2012/01/29 11:20:33 matthieu Exp $

Section "Device"
Identifier "Wsdisplay0"
Driver "wsfb"
Option "device" "/dev/ttyC1"
# Comment out to use the screen in vertical mode
Option "rotate" "CW"
EndSection


dmesg:
CODE
OpenBSD 5.5 (GENERIC) #4: Thu Mar 6 04:13:47 MST 2014
deraadt@zaurus.openbsd.org:/usr/src/sys/arch/zaurus/compile/GENERIC
real mem = 67108864 (64MB)
avail mem = 58281984 (55MB)
warning: no entropy supplied by boot loader
mainbus0 at root
cpu0 at mainbus0: PXA27x step C-5 (XScale core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB(32b/l,32way) I-cache, 32KB(32b/l,32way) wr-back-lock D-cache
pxaip0 at mainbus0: CPU clock = 416.000 MHz
pxaintc0 at pxaip0 addr 0x40d00000: Interrupt Controller
pxagpio0 at pxaip0 addr 0x40e00000: GPIO Controller
pxadmac0 at pxaip0 addr 0x40000000 intr 25: DMA Controller
pxaost0 at pxaip0 addr 0x40a00000
com0 at pxaip0 addr 0x40100000 intr 22: pxa2x0, 32 byte fifo
com1 at pxaip0 addr 0x40200000 intr 21: pxa2x0, 32 byte fifo
com2 at pxaip0 addr 0x40700000 intr 20: pxa2x0, 32 byte fifo (SIR)
ohci0 at pxaip0, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "PXA27x OHCI root hub" rev 1.00/1.00 addr 1
lcd0 at pxaip0
wsdisplay0 at lcd0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1 added (std, vt100 emulation)
zkbd0 at pxaip0
wskbd0 at zkbd0: console keyboard, using wsdisplay0
scoop0 at pxaip0: PCMCIA/GPIO controller
scoop1 at pxaip0: PCMCIA/GPIO controller
pxapcic0 at pxaip0: 2 slots
pcmcia0 at pxapcic0
pcmcia1 at pxapcic0
pxammc0 at pxaip0: MMC/SD/SDIO controller
sdmmc0 at pxammc0
zssp0 at pxaip0
apm0 at pxaip0
zts0 at pxaip0
wsmouse0 at zts0 mux 0
zaudio0 at pxaip0: I2C, I2S, WM8750 Audio
audio0 at zaudio0
zrc0 at pxaip0: CE-RH2 remote control
wskbd1 at zrc0 mux 1
wskbd1: connecting to wsdisplay0
flash0 at pxaip0: Samsung K9F1G08U0A 128Mx8 3.3V
pxaudc0 at pxaip0: USB Device Controller
usbf0 at pxaudc0: USB revision 1.1
cdcef0 at usbf0: address 2a:cb:00:00:00:00
wdc0 at pcmcia0 function 0 "HITACHI, microdrive" port 0x0/16: irq 138
wd0 at wdc0 channel 0 drive 0: <HMS360604D5CF00>
wd0: 32-sector PIO, LBA, 3906MB, 7999488 sectors
wd0(wdc0:0:0): using BIOS timings
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd0: 982MB, 512 bytes/sector, 2012160 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
boot device: wd0
root on wd0a (22a8adc198419c00.a) swap on wd0b dump on wd0b
WARNING: using filesystem date -- CHECK AND RESET THE DATE!
Go to the top of the page
 
+Quote Post
TronDD
post Jul 15 2014, 03:52 PM
Post #2





Group: Members
Posts: 54
Joined: 6-January 05
Member No.: 6,137



Keeping my eye on the snapshot builds. X hasn't even been build/being packaged for Zaurus for a while sad.gif

Tim.
Go to the top of the page
 
+Quote Post
ArchiMark
post Sep 11 2014, 08:53 AM
Post #3





Group: Members
Posts: 1,036
Joined: 25-June 03
From: Silicon Valley
Member No.: 208



In case anyone is checking the forums......

We've moved onto version 5.6 snapshot and X is working now....also, some other issues in prior version have been fixed.....

smile.gif
Go to the top of the page
 
+Quote Post
TheWalt
post Sep 11 2014, 10:42 AM
Post #4





Group: Members
Posts: 113
Joined: 11-August 05
Member No.: 7,836



QUOTE(ArchiMark @ Sep 11 2014, 12:53 PM) *
In case anyone is checking the forums......

We've moved onto version 5.6 snapshot and X is working now....also, some other issues in prior version have been fixed.....

smile.gif



Nice, maybe I'll give that a try also.
Go to the top of the page
 
+Quote Post
ArchiMark
post Sep 11 2014, 11:18 AM
Post #5





Group: Members
Posts: 1,036
Joined: 25-June 03
From: Silicon Valley
Member No.: 208



QUOTE(TheWalt @ Sep 11 2014, 11:42 AM) *
QUOTE(ArchiMark @ Sep 11 2014, 12:53 PM) *
In case anyone is checking the forums......

We've moved onto version 5.6 snapshot and X is working now....also, some other issues in prior version have been fixed.....

smile.gif



Nice, maybe I'll give that a try also.


Great!

Meanwhile, I'm close to finishing building first package for 5.6....

So, the more the merrier, as we can share builds and save wear and tear on our little Z's......

biggrin.gif
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 6th May 2015 - 05:38 PM