OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

> Kphone working for PC to phone calls
seachicken
post Oct 31 2004, 03:02 AM
Post #1





Group: Members
Posts: 17
Joined: 13-October 04
Member No.: 4,979



Kphone-4.04 now working for PC-Phone calls smile.gif
I've successfully called a real phone in the UK from my Zaurus in Japan.

I've only used it with the sipphone.com service, here are my tips to get it working.
    [1] There seems to be a problem with the sipphone.com service (not kphone), I contacted their technical support and they gave me a workaround. Now by dialing 099 + country + area + number I am able to successfully make voice calls to real telephones. You should just be able to dial 00+country+area+number but this doesn't work.

    [2] I have found that the stereo headphones I have make a perfectly acceptable mic and earpiece. Just use the right ear as the earpiece and the left ear as the mic. The mic quality is not very good, but usable for phone calls. I have also used a Japanese mobile phone "hands-free" set. In this case you also need a 2.5mm->3.5mm jackplug adapter. The audio quality from this mic much louder and clearer than using headphones for a mic. A final idea for an audio setup is to get an adapter used to connect 2 mono mics into a stereo jack, you can plug a mic into one input and an earpiece into the other. I haven't tried this myself, but I think it should work.

    [3] kphone 4.04 works better than kphone-pi -0.97. Both are able to make calls, but kphone-pi cannot hang up. The application just stops responding to user input once the connection has been made. To terminate the call with kphone-pi you must kill the kppi process, and get the other party to hang up their end. Kphone 4.04 works correctly, just click the Hangup button to disconnect the call.

    [4] Both kphone and kphone-pi have problems registering with the sipphone.com service. You need to be registered with the service (the client normally registers you with sipphone.com when it starts up) before you can successfully make a call. The only way I have found to get registered is to start a second client when the first client is still running. For some reason the second client pops up a dialog box asking you for your password and then successfully registers, the first client doesn't do this and eventually times out trying to register. This is a bit messy, hopefully someone can figure out an elegant solution.
Finally, what to expect...
The calls are pretty cheap, and the audio quality is very good, however there is often a delay on the line of about one second and this is quite difficult to get used to (perhaps this delay will not be so bad when calling from the US). Also, the sipphone.com service offers 5 minutes of calls free each day to various countries, very nice, but I have yet to be able to make a free call with them with any client (including their own in WindowsXP).. this may of course change at any time, or be peculiar to my setup, since things in the world of SIP phoning seem pretty volatile.
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
zeigerpuppy
post Jan 30 2007, 06:57 AM
Post #2





Group: Members
Posts: 109
Joined: 23-December 05
Member No.: 8,778



I have installed kphone 4.04, works when I change
audio to /dev/audio
But I get a segmentation fault after about 1 second ofr audio
any ideas?
Go to the top of the page
 
+Quote Post
johnsutton
post Jan 30 2007, 08:17 AM
Post #3





Group: Members
Posts: 32
Joined: 28-April 05
From: Wales
Member No.: 7,019



QUOTE(zeigerpuppy @ Jan 30 2007, 03:57 PM)
I have installed kphone 4.04, works when I change
audio to /dev/audio
But I get a segmentation fault after about 1 second ofr audio
any ideas?
*


I wouldn't waste your time with kphone, as a project it seems to be virtually dead and it never worked very well anyway ;-(

The future (for zaurus users) is Ekiga! And we are nearly there...(perhaps). There is an Ekiga ipk available for r121 but I don't know how good it is because r121 is too difficult (for me) to work with. But I think there is every good reason to believe it will work well - r121 is a 2.6 kernel with alsa sound, and this seems to be important for voip clients running on (relatively) slow processors.

Hopefully at some point soon some clever person/people will do one (or more) of the following:

- backport the existing ekiga ipk back to beta3
- sort out r121
- persuade the openzaurus people (who I believe have a 2.6 kernel rom which is fairly stable) that they really need to put together an ekiga ipk.

Of these options, the first is probably the easiest and most likely to happen, but the end result may never be as good because beta3 is a 2.4 kernel (I think? I'm still on beta1 so I'm not sure.)
The second option (I'm increasingly convinced) is never going to happen.
The third option is a real unknown! Why haven't they done it already? A working voip client is such a boon (to me, anyway) that I'm at a loss to understand why it doesn't already exist!

If I could find well written documentation describing the steps required to set up a build system on a Linux desktop required for making and testing ipk's targeted to (say) a beta3 system... then I would have a go at option 1 myself. Dream on...
Go to the top of the page
 
+Quote Post
xjqian
post Jan 30 2007, 05:02 PM
Post #4





Group: Members
Posts: 500
Joined: 17-January 04
From: St. Louis, USA
Member No.: 1,478



QUOTE(johnsutton @ Jan 30 2007, 11:17 AM)
I wouldn't waste your time with kphone, as a project it seems to be virtually dead and it never worked very well anyway ;-(
*

dead? Not yet http://sourceforge.net/projects/kphone
Go to the top of the page
 
+Quote Post
johnsutton
post Jan 31 2007, 03:14 AM
Post #5





Group: Members
Posts: 32
Joined: 28-April 05
From: Wales
Member No.: 7,019



QUOTE(xjqian @ Jan 31 2007, 02:02 AM)
QUOTE(johnsutton @ Jan 30 2007, 11:17 AM)
I wouldn't waste your time with kphone, as a project it seems to be virtually dead and it never worked very well anyway ;-(
*

dead? Not yet http://sourceforge.net/projects/kphone
*



Yes, I stand corrected. A new version was released in September for which the release notes claim that "The well known memory leaks are closed now". So that sounds promising!
Go to the top of the page
 
+Quote Post
jpmatrix
post Jan 31 2007, 03:18 AM
Post #6





Group: Members
Posts: 1,019
Joined: 15-February 05
From: France
Member No.: 6,477



QUOTE(johnsutton @ Jan 31 2007, 01:14 PM)
dead? Not yet http://sourceforge.net/projects/kphone
*



Yes, I stand corrected.  A new version was released in September for which the release notes claim that "The well known memory leaks are closed now".  So that sounds promising!
*


great!
who can compile it for us ? wink.gif
Go to the top of the page
 
+Quote Post

Posts in this topic
seachicken   Kphone working for PC to phone calls   Oct 31 2004, 03:02 AM
Foxdie   When I try to dial out (the numbers I'm trying...   Oct 31 2004, 10:28 PM
seachicken   QUOTEWhen I try to dial out (the numbers I'm t...   Nov 1 2004, 02:56 AM
nyar   Hmm, will this work with a bluetooth headset given...   Nov 1 2004, 03:20 AM
nyar   Actually, scrap that, how the hell am I going to g...   Nov 1 2004, 03:21 AM
deniscallies   Hi, Bluetooth and WLAN is possible with the AIRCA...   Nov 1 2004, 01:50 PM
Foxdie   That would require the headset/handsfree profile w...   Nov 1 2004, 10:47 PM
nyar   Oh, damn. Anybody want a cheap Blue Monkey CF car...   Nov 1 2004, 10:49 PM
pgas   There are also bluetooth handsfree sets that comes...   Nov 1 2004, 10:51 PM
zeigerpuppy   I have installed kphone 4.04, works when I change ...   Jan 30 2007, 06:57 AM
johnsutton   QUOTE(zeigerpuppy @ Jan 30 2007, 03:57 PM)I h...   Jan 30 2007, 08:17 AM
jpmatrix   i'm trying to compile ekiga-2.0.4 undex pdaxii...   Jan 30 2007, 09:58 AM
xjqian   QUOTE(johnsutton @ Jan 30 2007, 11:17 AM)I wo...   Jan 30 2007, 05:02 PM
johnsutton   QUOTE(xjqian @ Jan 31 2007, 02:02 AM)QUOTE(jo...   Jan 31 2007, 03:14 AM
jpmatrix   QUOTE(johnsutton @ Jan 31 2007, 01:14 PM)dead...   Jan 31 2007, 03:18 AM
kkazakov13   here you go: http://z.drun.net/packages/gnome-doc...   Jan 30 2007, 10:12 AM
jpmatrix   QUOTE(kkazakov13 @ Jan 30 2007, 08:12 PM)here...   Jan 30 2007, 11:31 AM
Capn_Fish   QUOTE(jpmatrix @ Jan 30 2007, 02:31 PM)QUOTE(...   Jan 30 2007, 01:46 PM
kkazakov13   I have it compiled since months http://z.drun.net...   Jan 31 2007, 03:51 AM
johnsutton   QUOTE(kkazakov13 @ Jan 31 2007, 12:51 PM)I ha...   Jan 31 2007, 12:31 PM
jpmatrix   QUOTE(johnsutton @ Jan 31 2007, 10:31 PM)If a...   Jan 31 2007, 01:54 PM
johnsutton   QUOTE(jpmatrix @ Jan 31 2007, 10:54 PM)QUOTE(...   Jan 31 2007, 02:35 PM
ratki   Hi, I've just insert the KphoneSI package wit...   Feb 5 2007, 10:30 PM
zeigerpuppy   QUOTE(ratki @ Feb 5 2007, 10:30 PM)Hi, I...   Feb 6 2007, 12:49 AM
jpmatrix   QUOTE(zeigerpuppy @ Feb 6 2007, 10:49 AM)but ...   Feb 8 2007, 04:40 AM
zeigerpuppy   QUOTE(jpmatrix @ Feb 8 2007, 04:40 AM)QUOTE(z...   Feb 8 2007, 05:53 AM
portalgod   I installed the package from http://z.drun.net/pac...   Mar 29 2007, 07:33 AM
T3_slider   Bottom line: it probably won't work under Cack...   Mar 29 2007, 08:31 AM
jfv   I got speaq working on my C860 Sharp ROM so I expe...   Mar 29 2007, 09:49 AM
portalgod   QUOTE(jfv @ Mar 29 2007, 10:49 AM)I got speaq...   May 24 2007, 11:38 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 22nd November 2014 - 01:21 PM