Hardware problems with pdaXrom.. Options

[Laze]

Do you have a piece of hardware thats not working under pdaXrom like a CF network card, USB controller etc?

Please post your cardctl ident and cardctl status and all other info you can find about the card (links to drivers etc.) - then we will try and fix them one at a time and try and make sure that pdaXrom supports as many accessories as possible.

We will probally be holding an IRC meeting with all user who are having problems with hardware but this is meant to be a warm up to see how many problems there are and how much time it will take to fix them.

[pungipungi]

Currently I got stucked with a Samsung Magiclan SWL-2610C card.

# cardctl status
Socket 0:
3.3V 16-bit PC Card
function 0: [ready]
# cardctl ident
Socket 0:
product info: "SAMSUNG", "WLAN CF Card(SWL-2600)"
manfid: 0x0250, 0xb001
function: 6 (network)
# dmesg
hostap_cs: 0.4.7 - 2005-11-20 (Jouni Malinen <jkmaline@cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=33 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=0 dflt.io.nwin=0
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 3.3, irq 135
hostap_cs: assuming no Primary image in flash - card initialization not completed
wifi0: test Genesis mode with HCR 0x1f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 00
Readback test failed, HCR 0x1f write 00 e1 a1 ff read 00 00 00 00
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 00
prism2_pccard_genesis_sreset: original COR 00
Readback test failed, HCR 0x0f write 00 e1 a1 ff read 00 00 00 00
prism2_pccard_genesis_sreset: original COR 00
wifi0: registered netdevice wlan0
corgi_bl : change limit contrast 3
prism2: wlan0: operating mode changed 3 -> 2
wlan0: cannot set RID fc00 (len=2) - no PRI f/w
wlan0: cannot set RID fc0e (len=34) - no PRI f/w
hostap_crypt: registered algorithm 'WEP'
wifi0: cannot get RID fc28 (len=2) - no PRI f/w
Could not read current WEP flags.
wifi0: encryption setup failed
wlan0: set_encryption failed
wlan0: cannot set RID fc02 (len=34) - no PRI f/w
wlan0: could not set interface UP - no PRI f/w
wlan0: could not set interface UP - no PRI f/w
prism2_download: dl_cmd=4 start_addr=0x003f0000 num_areas=3
wifi0: test Genesis mode with HCR 0x1f
prism2_pccard_cor_sreset: original COR 00
prism2_pccard_genesis_sreset: original COR 00
Readback test failed, HCR 0x1f write 00 e1 a1 ff read 00 00 00 00
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 00
prism2_pccard_genesis_sreset: original COR 00
Readback test failed, HCR 0x0f write 00 e1 a1 ff read 00 00 00 00
wifi0: Could not initiate genesis mode
wifi0: cannot get RID fd0b (len=1008) - no PRI f/w
wifi0: cannot get RID fd0b (len=1008) - no PRI f/w
prism2_download: dl_cmd=4 start_addr=0x003f0000 num_areas=3
wifi0: test Genesis mode with HCR 0x1f
prism2_pccard_cor_sreset: original COR 00
prism2_pccard_genesis_sreset: original COR 00
Readback test failed, HCR 0x1f write 00 e1 a1 ff read 00 00 00 00
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 00
prism2_pccard_genesis_sreset: original COR 00
Readback test failed, HCR 0x0f write 00 e1 a1 ff read 00 00 00 00
wifi0: Could not initiate genesis mode
wifi0: cannot get RID fd0b (len=1008) - no PRI f/w
wifi0: cannot get RID fd0b (len=1008) - no PRI f/w
wifi0: cannot get RID fd0b (len=1008) - no PRI f/w
#

Seems that there's no primary firmware available. I hope I'm correct that this card uses a PRISM based chip ...

Anybody an idea how to proceed?