OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

> New Bluetooth Drivers, For Sharp ROMs using 2.4.18 kernel
tumnus
post Jan 9 2005, 05:28 PM
Post #1





Group: Members
Posts: 1,176
Joined: 3-October 03
From: UK
Member No.: 547



I've finally got around to updating the Bluetooth BlueZ driver ipk.

This is only for Sharp ROMs and variants of Sharp ROMs, excluding Cacko ROMs, that use the 2.4.18 kernel. So for example this includes Sharp ROMs on SL-5500, SL-5600, SL-6000, SL-C850, but NOT SL-3000.

Here's some of the improvements:
  • Ambicom BT2000C Support. Thanks to tetron for spotting this had been included in the latest drivers. EDIT: Actually it doesn't look like this is working sad.gif
  • Socket Card Rev G Support without requiring the extra bluez-csr-serial ipk. Thanks to maslovsky for sorting this out
  • Hopefully Dlink, Mavin, Billionton, BrainBoxes, and Dell cards should all be supported 'out of the box'
  • Should work 'out of the box' on the SL-6000. (It moves /etc/pcmcia.bm3.conf out of the way on installation and back again on removal) Thanks to DrWowe for spotting what was wrong previously
  • EDIT: Included hci_usb driver would should allow SL-6000L owners to use USB Bluetooth dongles with the appropriate USB cable.
EDIT: The PAN profile should be working now as I resolved a kernel module problem.

Before installing the new ipk, backup your files under /etc/bluetooth and /etc/pcmcia/peers. Then you can easily restore them after installing the new ipk. (You will need to run '/etc/rc.d/init.d/bluetooth restart' after restoring rfcomm.conf and hcid.conf)

Also uninstall all bluez packages before installing this one, including the bluez-csr-serial, which is no longer required with the new package.

So here is the new ipk (Note: the 1st, 3rd and 4th underscores [_] in the filename need to be changed to dashes [-] after downloading):

This post has been edited by tumnus: Feb 28 2005, 08:26 AM
Attached File(s)
Attached File  bluez_zaurus_2.13_2.4.18_alpha3_arm.ipk ( 310.9K ) Number of downloads: 3133
 
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
xjqian
post Feb 28 2006, 09:39 PM
Post #2





Group: Members
Posts: 500
Joined: 17-January 04
From: St. Louis, USA
Member No.: 1,478



QUOTE(tumnus @ Jan 9 2005, 08:28 PM)
This is only for Sharp ROMs and variants of Sharp ROMs, excluding Cacko ROMs, that use the 2.4.18 kernel. So for example this includes Sharp ROMs on SL-5500, SL-5600, SL-6000, SL-C850, but NOT SL-3000.

Also uninstall all bluez packages before installing this one, including the bluez-csr-serial, which is no longer required with the new package.

So here is the new ipk (Note: the 1st, 3rd and 4th underscores [_] in the filename need to be changed to dashes [-] after downloading):
*


The latest package works fine for the stock sharp kernel, but is not working for the fast kernel in 6K. I believe the 6k fast kernel is a preemptive one as in Tetsu's (actually they are the same, common zaurus kernel project). Tumnus, is it possible to build a bluez package for the preemptive kernel?

after installing the package, dmesg
CODE
ttyS03 at port 0xf60003f8 (irq = 43) is a 16C950/954
BlueZ HCI UART driver ver 2.1 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
Internal error: branch through zero: 0
CPU: 0
pc : [<00000004>]    lr : [<0000a010>]    Not tainted
sp : bffffa98  ip : c05bf3ec  fp : c1351e5c
r10: 00000000  r9 : 00000000  r8 : c05bf080
r7 : 80000013  r6 : c1350000  r5 : c379a0a0  r4 : c05bf3a0
r3 : 00000000  r2 : 00000002  r1 : 00000009  r0 : c379a0a0
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  Segment user
Control: 197F  Table: A129C000  DAC: 00000015  PID:  0
Process hciattach (pid: 1536, stackpage=c1351000)
Stack: (0xc1351e24 to 0xc1352000)
1e20:          0000a010 00000004 60000013 c379a0a0 c05bf080 c3832248 00000008
1e40: 00000004 00000001 c1351e8c 00000000 c1351e88 c1351e60 c5996a88 c5996ae4
1e60: 00000001 c2cf8004 c2cf8004 c1350000 00000000 c3c7aa80 c2cf8014 c1351ea8
1e80: c1351e8c c59984c8 c59969ac 00000001 c59991dc c2cf8004 00000001 c1351ec4
1ea0: c1351eac c0053df4 c599849c 00000000 00000001 c2cf8004 c1351ed4 c1351ec8
1ec0: c5990d84 c0053dc8 c1351efc c1351ed8 c5992d58 c5990d78 c2cf8000 c2cf8000
1ee0: c59e2cfc c2cf8164 00000000 00000001 c1351f10 c1351f00 c59e0738 c5992b08
1f00: 00000000 c1351f2c c1351f14 c59e07fc c59e06f4 c2cf8000 c1c7c000 00000000
1f20: c1351f54 c1351f30 c59e0880 c59e07bc 00000001 c1c7c000 c1c7c000 400455c8
1f40: 400401c8 c16b5440 c1351f80 c1351f58 c0104424 c59e0824 c16b5440 400455c8
1f60: 00000003 00000001 ffffffe7 c1350000 00000004 c1351fa4 c1351f84 c007fc34
1f80: c0103f04 bffffa9c 00000003 00012b48 00000036 c0030b04 00000000 c1351fa8
1fa0: c0030960 c007f9f0 bffffa9c c0034550 00000003 400455c8 00000001 0000000f
1fc0: bffffa9c 00000003 00012b48 00000000 00012e7c bffffb18 00000004 bffffaf4
1fe0: 00012db0 bffffa98 0000a010 400fec54 60000010 00000003 00000000 00000000
Backtrace:
Function entered at [<c5996ad8>] from [<c5996a88>]
Function entered at [<c59969a0>] from [<c59984c8>]
Function entered at [<c5998490>] from [<c0053df4>]
r6 = 00000001  r5 = C2CF8004  r4 = C59991DC
Function entered at [<c0053dbc>] from [<c5990d84>]
r6 = C2CF8004  r5 = 00000001  r4 = 00000000
Function entered at [<c5990d6c>] from [<c5992d58>]
Function entered at [<c5992afc>] from [<c59e0738>]
Function entered at [<c59e06e8>] from [<c59e07fc>]
r4 = 00000000
Function entered at [<c59e07b0>] from [<c59e0880>]
r6 = 00000000  r5 = C1C7C000  r4 = C2CF8000
Function entered at [<c59e0818>] from [<c0104424>]
Function entered at [<c0103ef8>] from [<c007fc34>]
Function entered at [<c007f9e4>] from [<c0030960>]
r8 = C0030B04  r7 = 00000036  r6 = 00012B48  r5 = 00000003
r4 = BFFFFA9C
Code: bad PC value.
note: hciattach[1536] exited with preempt_count 2
<<<< Init_Module PASS >>>


not surprisingly, hciconfig didn't give me back any MAC address
CODE
hci0:    Type: UART
    BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
    DOWN
    RX bytes:12 acl:0 sco:0 events:0 errors:0
    TX bytes:6 acl:0 sco:0 commands:0 errors:0
Go to the top of the page
 
+Quote Post

Posts in this topic
tumnus   New Bluetooth Drivers   Jan 9 2005, 05:28 PM
tumnus   I have also improved the susp-resume-bluez package...   Jan 9 2005, 05:30 PM
tumnus   Please test the ipks above and let me know whether...   Jan 10 2005, 12:48 AM
tumnus   I think I might have made a mistake for the serial...   Jan 10 2005, 03:12 AM
tumnus   No one tested these ipks yet?   Jan 10 2005, 09:35 AM
Pyrates   Sorry, I don't have anything bluetooth to test...   Jan 10 2005, 11:35 AM
tumnus   I've fixed the unresolved symbols problem in t...   Jan 10 2005, 11:41 AM
maslovsky   Here are some results: Zaurus 5500, Sharp ROM 3.1...   Jan 11 2005, 04:45 AM
EdbO   To get the Billionton Bluetoothcard working you mu...   Jan 11 2005, 07:28 AM
maslovsky   QUOTE(EdbO @ Jan 11 2005, 06:28 PM)To get the...   Jan 11 2005, 08:52 AM
tumnus   I know I need to add some scripting options for th...   Jan 11 2005, 09:30 AM
maslovsky   QUOTE(tumnus @ Jan 11 2005, 08:30 PM)I know I...   Jan 14 2005, 08:20 AM
spectrum   Hi folks, I have the SL5000D and cacko rom. I rec...   Jan 14 2005, 08:27 AM
nexxusone   I've just installed the drivers on my Zaurus c...   Jan 15 2005, 09:22 AM
tumnus   OK, here's a challenge to anyone with a serial...   Jan 15 2005, 10:32 AM
pakman   QUOTE(tumnus @ Jan 15 2005, 06:32 PM)OK, here...   Jan 31 2005, 09:48 AM
tumnus   QUOTE(pakman @ Jan 31 2005, 05:48 PM)/etc/pcm...   Jan 31 2005, 03:34 PM
Dave L.   Tumnus, You are the man I've been tearing...   Jan 22 2005, 10:02 AM
mimsmall   Using BT2000E on 6000L. Downloaded the driver and...   Jan 22 2005, 04:25 PM
tumnus   I've corrected the applet links in the Bluetoo...   Jan 22 2005, 06:15 PM
tumnus   I've corrected the syntax error spotted by pak...   Jan 31 2005, 03:45 PM
tumnus   No one with a serial based Bluetooth card tried th...   Feb 4 2005, 07:27 PM
mimsmall   I'm in the process. Making the Irda connection...   Feb 5 2005, 07:07 AM
lwong   Tumnus, Thanks for your effort to bring Bluetooth...   Feb 13 2005, 06:28 PM
lwong   Ok, it's working now. All I did was eject the ...   Feb 14 2005, 08:30 AM
sornette   hey tumnus, Here's another input. I tried the ...   Feb 21 2005, 09:03 AM
tumnus   Does the card automatically eject and reappear whe...   Feb 21 2005, 11:56 AM
sornette   QUOTE(tumnus @ Feb 21 2005, 03:56 PM)Does the...   Feb 22 2005, 09:58 AM
pakman   Hi Tumnus, Finally got around to trying the new b...   Feb 22 2005, 04:38 AM
tumnus   sornette, thanks for pinpointing that. maslovsky j...   Feb 22 2005, 10:44 AM
OttoAcuna   Tumnus, Thanks for the effort!!! I n...   Feb 26 2005, 10:46 PM
tumnus   I'm afraid the latest Ambicom BT CF card still...   Feb 27 2005, 03:43 PM
lgurevich   QUOTE(tumnus @ Feb 27 2005, 06:43 PM)I'm ...   Feb 28 2005, 10:51 PM
tumnus   QUOTE(lgurevich @ Mar 1 2005, 06:51 AM)I have...   Mar 1 2005, 12:25 AM
lgurevich   QUOTE(tumnus @ Mar 1 2005, 03:25 AM)QUOTE(lgu...   Mar 1 2005, 05:46 PM
tumnus   I've uploaded a new version of the susp-resume...   Feb 28 2005, 08:28 AM
polito   *sigh* yep, can definitely confirm the ambicom bt2...   Feb 28 2005, 09:55 PM
xjqian   6k, stock rom, adf's fast kernel Socket BT rev...   Apr 17 2005, 07:39 PM
xjqian   i got it figured out. i'm typing using the bt ...   Apr 24 2005, 04:48 AM
xjqian   more updates about suspend-resume bluez-zaurus_2....   Apr 24 2005, 10:32 PM
steliosx   will those nice drivers work with a c1000 used wit...   Apr 27 2005, 07:45 AM
tumnus   QUOTE(steliosx @ Apr 27 2005, 03:45 PM)will t...   Apr 27 2005, 07:53 AM
adrian   QUOTE(tumnus @ Apr 27 2005, 05:53 PM)http://w...   May 4 2005, 05:52 AM
tumnus   QUOTE(adrian @ May 4 2005, 01:52 PM)QUOTE(tum...   May 4 2005, 01:49 PM
steliosx   thanks for your reply and continuous support tumnu...   Apr 27 2005, 10:18 AM
Ragnorok   - All is well, essentially. So, if I only had a b...   May 14 2005, 07:31 PM
Omicron   DELETED   May 16 2005, 08:45 PM
egg8178   can some one confirm that bt2000c is working as st...   Jun 3 2005, 07:19 AM
OttoAcuna   QUOTE(egg8178 @ Jun 3 2005, 03:19 PM)can some...   Nov 22 2005, 06:23 PM
g33k   Will this stuff work with pdaXrom? Will this stuf...   Jun 20 2005, 09:35 AM
grog   Could somebody please do me a favour & comment...   Jul 28 2005, 08:55 AM
mike456   QUOTE(grog @ Jul 28 2005, 09:55 AM)Could some...   Jul 28 2005, 04:58 PM
Cresho   Here is a list of places you can by the one i use....   Sep 1 2005, 06:53 PM
tfulcher   OK, I got to jump in here with a request for assis...   Sep 8 2005, 05:51 AM
Cresho   QUOTE(tfulcher @ Sep 8 2005, 05:51 AM)I don...   Sep 8 2005, 03:53 PM
blinkblob   so What's new with everybody? Still waiting ...   Sep 10 2005, 03:28 PM
BissigerPinguin   I had some trouble to get the Billionton CFBT02-B2...   Sep 17 2005, 10:16 AM
speculatrix   might be worth looking at OpenTom and TomTom's...   Jan 1 2006, 09:17 AM
xjqian   QUOTE(tumnus @ Jan 9 2005, 08:28 PM)This is o...   Feb 28 2006, 09:39 PM
jstracke   I just bought an AIRNET ABT201 USB dongle, and I h...   Mar 16 2006, 08:24 AM
jstracke   QUOTE(jstracke @ Mar 16 2006, 11:24 AM)I just...   Mar 23 2006, 07:45 PM
dinorex   I really don't know why.... I've just got...   Oct 12 2006, 10:09 AM
Cresho   QUOTE(dinorex @ Oct 12 2006, 10:09 AM)I reall...   Oct 12 2006, 01:22 PM
Meanie   QUOTE(Cresho @ Oct 13 2006, 07:22 AM)QUOTE(di...   Oct 12 2006, 02:01 PM
Cresho   installed qshdlg. finds phone but wont connect th...   Oct 12 2006, 08:37 PM
D_odik   Who kept this driver, please answer! I can not...   Jul 16 2009, 11:40 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 25th December 2014 - 09:12 PM