OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

Profile
Personal Photo
Options
Options
Personal Statement
wsuetholz doesn't have a personal statement currently.
Personal Info
wsuetholz
Age Unknown
Gender Not Set
Location Unknown
Birthday Unknown
Interests
No Information
Statistics
Joined: 19-July 06
Profile Views: 1,116*
Last Seen: 4th March 2010 - 12:57 PM
Local Time: Nov 26 2014, 07:44 PM
64 posts (0 per day)
Contact Information
AIM No Information
Yahoo No Information
ICQ No Information
MSN No Information
* Profile views updated each hour

wsuetholz

Members


Topics
Posts
Comments
Friends
My Content
1 Aug 2008
Hello,
I am listing my Sharp Zaurus SL-C3100 on EBay, I got this from ArchiMark a while back and it has performed very well for me, however I need to raise some cash so I'm starting with this unit.

Thank you
28 Jun 2007
Hello,

As you may have noticed from my prior posts.. I am interested in trying to get the Embedded Works Wi-FI/Bluetooth module working with the Zaurus.

In regards to that, does anyone have the interest/time to develop a design for a CF card that would have the proper Molex 54722-0607 mating connector and a SD card slot, heck maybe even add a GPS receiver as well since the part from Embedded Works EW-WMBGMR01 is really small. I actually think that they get it from RoyalDigital, Inc. since I see a made in Taiwan label at EW.

This would be the ultimate expansion card for devices with a CF slot.... If it's doable.

I am not real hardware savvy, but most of the software work to interface with the Marvell chipset is done, and they are working with I think Koen to have the CF portion working. If it could be made mostly compatible with the devices that are being planned to be used in the PP, then the drivers could be reused for the PP when it gets built.

No, I'm not suggesting squeezing the GSM phone on as well, unless you think it could be done :-)

I know that you can combine memory and WI-FI in a CF card since SanDisk did it with their 128M/802.11B card, don't know how they did it, but it showed up as two sub devices when the CF card was plugged in.

Bill Suetholz
28 Jun 2007
Hello,

As you may have noticed from my prior posts.. I am interested in trying to get the Embedded Works Wi-FI/Bluetooth module working with the Zaurus.

In regards to that, does anyone have the interest/time to develop a design for a CF card that would have the proper Molex 54722-0607 mating connector and a SD card slot, heck maybe even add a GPS receiver as well since the part from Embedded Works EW-WMBGMR01 is really small. I actually think that they get it from RoyalDigital, Inc. since I see a made in Taiwan label at EW.

This would be the ultimate expansion card for devices with a CF slot.... If it's doable.

I am not real hardware savvy, but most of the software work to interface with the Marvell chipset is done, and they are working with I think Koen to have the CF portion working. If it could be made mostly compatible with the devices that are being planned to be used in the PP, then the drivers could be reused for the PP when it gets built.

No, I'm not suggesting squeezing the GSM phone on as well, unless you think it could be done :-)

I know that you can combine memory and WI-FI in a CF card since SanDisk did it with their 128M/802.11B card, don't know how they did it, but it showed up as two sub devices when the CF card was plugged in.

Bill Suetholz
28 Jun 2007
Hello,

As you may have noticed from my prior posts.. I am interested in trying to get the Embedded Works Wi-FI/Bluetooth module working with the Zaurus.

In regards to that, does anyone have the interest/time to develop a design for a CF card that would have the proper Molex 54722-0607 mating connector and a SD card slot, heck maybe even add a GPS receiver as well since the part from Embedded Works EW-WMBGMR01 is really small. I actually think that they get it from RoyalDigital, Inc. since I see a made in Taiwan label at EW.

This would be the ultimate expansion card for devices with a CF slot.... If it's doable.

I am not real hardware savvy, but most of the software work to interface with the Marvell chipset is done, and they are working with I think Koen to have the CF portion working. If it could be made mostly compatible with the devices that are being planned to be used in the PP, then the drivers could be reused for the PP when it gets built.

No, I'm not suggesting squeezing the GSM phone on as well, unless you think it could be done :-)

I know that you can combine memory and WI-FI in a CF card since SanDisk did it with their 128M/802.11B card, don't know how they did it, but it showed up as two sub devices when the CF card was plugged in.

Bill Suetholz
28 Jun 2007
Hello,

As you may have noticed from my prior posts.. I am interested in trying to get the Embedded Works Wi-FI/Bluetooth module working with the Zaurus.

In regards to that, does anyone have the interest/time to develop a design for a CF card that would have the proper Molex 54722-0607 mating connector and a SD card slot, heck maybe even add a GPS receiver as well since the part from Embedded Works EW-WMBGMR01 is really small. I actually think that they get it from RoyalDigital, Inc. since I see a made in Taiwan label at EW.

This would be the ultimate expansion card for devices with a CF slot.... If it's doable.

I am not real hardware savvy, but most of the software work to interface with the Marvell chipset is done, and they are working with I think Koen to have the CF portion working. If it could be made mostly compatible with the devices that are being planned to be used in the PP, then the drivers could be reused for the PP when it gets built.

No, I'm not suggesting squeezing the GSM phone on as well, unless you think it could be done :-)

I know that you can combine memory and WI-FI in a CF card since SanDisk did it with their 128M/802.11B card, don't know how they did it, but it showed up as two sub devices when the CF card was plugged in.

Bill Suetholz
Last Visitors
Guest


5 Jun 2009 - 18:25
duo


7 May 2009 - 7:17
sds


6 Oct 2008 - 23:24

Comments
Other users have left no comments for wsuetholz.

Friends
There are no friends to display.
RSS Lo-Fi Version Time is now: 26th November 2014 - 05:44 PM