Android 4.0.3

First I must admit I didn`t test it yet...
-----
Update

Tested it and it works!
Sometimes a bit slow but overal no problems.
A minor sitback is that the keyboard layout isn't correct with Android, but you will figure it out while typing.
This is only for the special characaters.

-----
Update

Played for it for an hour... to slow for me...


How to put this on your netwalker:

First, please install gparted into your NetWalker, and make partitions in your SD card.
To install gparted, please try the command "sudo apt-get install gparted,"
and if it does not work, please find gparted_0.4.3-0ubuntu1_armel.deb from the Internet, and install it with "dpkg -i gparted_0.4.3-0ubuntu1_armel.deb".



The following two partitions are required.

1GB of ext3 (for kernel and android system), label = rootfs
remaining of FAT32 (LBA) (for SD card area), label = media


Then mount the SD card by re-inserting the SD card.
Then, install the android as follows. You should have write permission in the working directory.

Download http://mit.sharp.co.jp/os.tar.bz2, and extract it in ext3 area of your SD card.



Erase all the lines in /media/rootfs/etc/udev/rules.d/70-persistent-net.rules in order to fix the Wifi device as "eth0".

For example, please use gedit.



Rename /media/rootfs/etc/rc2.d/S01upfirm as /media/rootfs/etc/rc2.d/~S01upfirm.



Edit the console option in /media/rootfs/boot/boot.conf as "console=tty1"
For example, please use gedit.



Copy the kernel zImage ($ANDROID_ROOT/jaunty-arm/arch/arm/boot/zImage)
into the boot directory. You cannot use the kernel for gingerbread.



Put the android system in /media/root/android/ics



Edit the /media/rootfs/etc/rc.local, and put a line /usr/sbin/chroot /android/ics /init
before "exit 0".
For example,


Then, unmount the CD card.



And shutdown Ubuntu. Please unmount the SD card everytime before you shutdown Ubuntu.


To launch android, please press two mouse buttons and power button simultaneously.
If small black square appears at the left side of Sharp logo, the launch is successful.

Here a little status overview:

Wifi
Wifi works, but sometimes it is disconnected.

First, enable Wifi. If your network does not appear, add your network manually. Then please toggle Wifi ON/OFF serveral times,

Bluetooth
We confirmed that Buffalo BSHSBD02 works. However, we had to insert the device directly to NetWalker without bus-power USB hub.
You can use BluetoothChat in android SDK.


WebCam
In kernel, Video4Linux is enabled, but CameraService does not work yet. We added TKCam2Webcams.apk which aquare images directly from kernel.

USB-Serial
You can use the devices with FTDI driver and PL2302 driver.

Sound
Not working.

Others
NetWalker sleeps by pressing the power button, but display is always ON.
You can choose "Never timeout" for sleep mode.
You cannot use the console of android nor linux.

Other problems
LiveWallpaper does not work
Battery always show 100%
The frequency of CPU is always set maximized because "on demond" mode seems not to work.

How to can be found HERE

Original Sharp Rom

Hi all,

I am searching for the stockrom for the Tosa.
Anybody could give me a hint where I can the download for this?

Thanks in advance.

Regards,

Rob

Wanted Sl-6000

Hi all,

Always wanted a Zaurus SL-6000.
I am searching for one with build-in wifi
So now time has come to get one.

If you have one for sale let me know!

Thanks!

How To: Restore Your Netwalker Pc-z1

Hi all,

When toying around with my Netwalker I bricked it twice.
So had to do a restore twice already, so here is a manual.

See my blog with latest info!

Requirements

• PC running linux (I am using Ubuntu/OpenSuse)
• Micro SD-Card (min 4 GB) - IT WILL DELETE ALL FILES ON IT!
• Netwalker Restore Pack - Download

To Do

1. we have to find out which /dev/sd* is the Micro SD-Card. (You can use Gparted to find out)
   Example 1: Your system has 1 harddisk
   Harddisk = /dev/sda
   Micro SD-Card = /dev/sdb
   Example 2: You system has 3 harddisks
   Harddisk 1 = /dev/sda
   Harddisk 2 = /dev/sdb
   Harddisk 3 = /dev/sdc
   Micro SD-Card = /dev/sdd
   
2. Now we know which is the Micro SD-Card we can use the following command:
   dd if=netwalker.img of=/dev/sdb bs=1M
   Be sure to be in the same directory as your netwalker img file, and edit your path to your Micro SD-Card if needed.
   For example:
   dd if=/home/username/Downloads/ netwalker.img of=/dev/sdd bs=1M
3. This process will take some time, so go get yourself a coffee/snack and return to your pc after a 15 – 30 minutes.
   When you can start your new command in the Teminal it is done.
4. Put the micro SD-Card in your Netwalker.
5. Hold down the two mouse buttons and start your Netwalker, keep the buttons down even after the Sharp logo.
6. A Japanese question will be asked: press Y
7. After the restore is done, press ENTER

Which Window Manager Do You Use?

With the default Sharp Ubuntu "Rom" which Window Manmager do you use?

And do you have some optimise tips?

Currently I am using XFCE, a bit faster as the default Gnome.
Though LXCE is faster, the Gnome network manager isn`t working.