Usb Bluetooth Woes

I have a Targus usb Bluetooth adapter. When I plug it into Z (Akita), it is recognized, only after doing a "modprobe ohci-hcd".

dmesg reports:

<6>usb 1-2: new full speed USB device using pxa27x-ohci and address 7
<6>usb 1-2: configuration #1 chosen from 1 choice
<6>hub 1-2:1.0: USB hub found
<6>hub 1-2:1.0: 3 ports detected
<4>hub 1-2:1.0: insufficient power available to use all downstream ports
<6>usb 1-2.1: new full speed USB device using pxa27x-ohci and address 8
<6>usb 1-2.1: configuration #1 chosen from 1 choice
<6>usb 1-2.2: new full speed USB device using pxa27x-ohci and address 9
<6>usb 1-2.2: configuration #1 chosen from 1 choice
<6>input: Broadcom Corp BCM92045DG-Flash_UHE as /class/input/input6
<6>power.c: Adding power management to input layer
<6>input: USB HID v1.11 Keyboard [Broadcom Corp BCM92045DG-Flash_UHE] on usb-pxa27x-2.2
<6>usb 1-2.3: new full speed USB device using pxa27x-ohci and address 10
<6>usb 1-2.3: configuration #1 chosen from 1 choice
<6>input: Broadcom Corp BCM92045DG-Flash_UHE as /class/input/input7

lsusb reports:
Bus 1 Device 11: ID 0a5c:4503 Broadcom Corp.
Bus 1 Device 10: ID 0a5c:4502 Broadcom Corp.
Bus 1 Device 9: ID 0a5c:2100 Broadcom Corp.
Bus 1 Device 8: ID 0a5c:4500 Broadcom Corp.
Bus 1 Device 1: ID 0000:0000


But when I try to scan for devices, it says "inquiry failed". I have 2 devices waiting for a connection. Any clues?

Installing Xserver On Console Image

After installing the Angstrom console image, how does one go about installing packages to enable xserver? I got to a point where X would try to start and then it says no screen found. I've searched everywhere and found no answer.

Thank you.

p.s. I know it's easier to install the X image, but I have a reason for wanting to install the base.

Angstrom Screenshots

Screenshots from the 20070604 build of Angstrom.


http://www.flickr.com/photos/cleverswine/tags/angstrom/

Icewm - The Ultimate Configuration

Screenshots here:
http://www.cleverswine.net/kn/zaurus.html

pdaXrom beta3
IceWM with SilverXP theme (some fonts and the "start" menu modified)
* get themes here: http://themes.freshmeat.net/browse/925/
extract the archive into your /usr/share/icewm/themes directory and then select the theme from the menu

IceWM has a low memory footprint and is reasonably fast (esp compared to other WMs on the Z)

The background image is set using icewmbg (started by icewm-session). XScreensaver is also enabled, and working. Here is an excerpt from my .xinitrc:



in the ~/.icewm/prefoverride file, you can override the theme's background by adding this:



The panel was manipulated by editing ~/.icewm/toolbar
I created a personalized launcher menu with:


and created the file ~/.icewm/favs to hold the launcher items:


The "start" menu can be customized by editing ~/.icewm/menu
I simplified mine by removing most of the menu items, leaving me with Programs and Settings:


To change the "start" menu button, edit the image /usr/share/icewm/themes/[the them you are using]/icewm.xpm

The IceWM web site also has helpful info:
http://www.icewm.org/manual/

Tools For Gui Dev In Gpe

I would like to do some gtk development for GPE, but I'm having a difficult time finding languages/bindings that work. Python seems to be the predominant language with the most APIs for GPE development, but I would prefer to avoid Python.

I would specifically like to use the Ruby/GTK binding, but after a couple of tries, I have been unable to install it from source. I wonder if someone could package up some Ruby tools for GPE??