Irda(beam) Problem With Cacko 1.23

i cannot send/receive file with Cacko123(Akita) by beam; while sending, the device to receive file stops receiving and show "failure" as soon as i started sending; while receiving, the sending device cannot find zaurus at all

my zaurus worked well in the past with original rom

anybody teach me howto solve this problem?
thanks

I Met A Problem In Cacko, Is It A Bug?

today, while i'm going to play my c1000, i open the lid and press the on/off button, as the screen is going to light, i pressed the button again unconsciously, then the screen went off. and i tried press the button several times after that, the screen won't light

and then i tried to reboot with reset key at the back, the system begins to restart, everything looks normal until the "Starting Linux and Qtopia" screen shows. THEN IT WENT OFF AGAIN! and after the black screen, i can hear the "DingDong" sound telling me system is started

i'm sure that my battery power is enough.

i know reflash/reinstall may solve this problem, but i really do not want to do that

anybody could help me? Thanks

Battery, Charging Problem...please Help

Today, while i'm watch e-books using my zaurus C1k, its screen goes off suddenly.
I think maybe its battery has been ran out, so i plugged the AC adapter in, and pressed the on/off button.
The screen lighted again, but I saw the battery light was dark and the icon of the battery didn't blink to tell me it's charging.
I think maybe something wrong with the OS, so i try to reboot the machine. And it failed to boot (without AC adapter). The screen goes off again.
And from then on, I cannot boot my poor zaurus:(

It seemed the problem is I cannot charge the battery. I can enter Service Mode (D+M Mode), but I don't know what to do. I tried reflash the nand flash, it's finished without a error, but it didn't worked.

If anybody knows how to solve this problem, would you please tell me?

Thanks for watching this post.

P.S. I used Trisoft rom and special kernel v18a.

[help]c1000 Always Restarts, Usb Problem

I'm using a Zaurus C1000. I've set the C1k's "PC Link" mode to "Storage->SD Card", and it used to work well.

But today, while I'm plugging the usb cable in, the Zaurus restarts to the "CG Silicon" picture. Just leave a quick prompt like "Can't locate block-major-3".
And I tried several times, there's always the same scene.

Does any one can help me to solve this problem? Thanx.