Greg2 doesn't have a personal statement currently.
Gender Not Set
Joined: 28-October 03
Profile Views: 3,619*
Last Seen: Private
Local Time: Sep 16 2014, 06:31 AM
790 posts (0 per day)
* Profile views updated each hour
19 May 2006
I have spent the past 4 days setting up OE/Bitbake on my laptop. I have compiled and built my own monotone_0.25-1 deb to make this work properly on my 56K dial-up connection. This is so sad it's funny... I have networked 56K. It is very slow, but I have it working properly now. I have tested it out with bitbaking a (working) nano and a zuc ipk.
Now that I know this works with dial-up (if I don't need the phone line, or die of old age), I though I would make a bigger test. So I did a monotone pull (org.openembedded.oz354x)and update very early today, and then did a bitbake bootstrape-image for a collie. Everthing seemed to be working... and many, many hours later it failed with this error:
-snip-A search on bugzilla found this:
| linux-hotplug: unsatisfied recommendation for pciutils
| linux-hotplug: unsatisfied recommendation for usbutils
| altboot: unsatisfied recommendation for dosfstools
| Nothing to be done
| An error ocurred, return value: 1.
| Collected errors:
| ERROR: Cannot satisfy the following dependencies for task-bootstrap:
NOTE: Task failed: /stuff/build/tmp/work/bootstrap-image-1.0-r1/temp/log.do_rootfs.30396
NOTE: package bootstrap-image-1.0-r1: task do_rootfs: failed
ERROR: TaskFailed event exception, aborting
NOTE: package bootstrap-image-1.0: failed
ERROR: Build of bootstrap-image failed
It's still open.
Edit: bug#942 is resolved
Where RP makes a comment that 'could' be related? I'm not sure?
What can I do to fix this hostap-conf dependencies error so I can finish this build?
For the record I have used 3.2GB of disk space for everything. With the exception of my slow connection... OE/Bitbake works 'very' fast as compared to one year ago. I should add that I have checked and there are 6 kernels and 1270 ipks in my /build/tmp for this build alone.
Thanks to everyone involved in making this work so well... and so easy to use.
3 Nov 2005
Here is a modified opera7.55 ipk that has been requested by some users for use in 3.5.4-RC... I will attach it at the end of this post.
I've simply modified MrSquishy's repackaged opera7.55.ipk extracted from the IBM multimoda.ipk... that has worked for me and many others on OZ3.5.2 official and the Hentges OZ3.5.2 and 3.5.3 versions without problems.
I've modified MrSquishy's opera.ini (that already reflects his directory changes) to increase the cache size that was causing some problems with users.
I've modified MrSquishy's postinst to properly symlink '.opera' and '.operasave' with the new '/media/card/packages/' directory now used.
Replaced a 'couple' of the Crystal icon buttons with the original opera buttons (as per my taste), and the original opera desktop icon from an older opera version.
Repackaged the ipk with ipkg-utils-1.7 for OZ compatibility.
Please note that this is for an SD-card install... and you should remove or edit the postinst for any other install destination.
DISCLAIMER: The instructions and ipk contained in this post are provided AS IS. This has only been tested on the collie and poodle.
Instructions for SD-card installation-
Install the sharp-compat-libs, opie-sh and the qte-font-helvetica-large ipk (or the helvetica size of your choice) from the opie feed.
Copy the attached ipk to your CF-card and open a terminal:
ipkg -d sd --force-depends install opera_7.55.OZ3.5.4_arm.ipk
ipkg-link add opera
Go to the Settings tab, click "Reload Icons"
Go to the Settings tab, click on Libraries, List, Applications, Opera Browser and click okay.
Click on the opera icon and enjoy.
Please note that because of the latest sharp-compat-libs you may need to click on the opera icon twice to open or close the browser.
I would like to thank and give credit to MrSquishy for originally modifying this.
Edit: I would also like to thank the OZ and OE devs for making this new release.
Here it is:
opera_7.55.OZ3.5.4_arm.ipk ( 2.47MB ) Number of downloads: 1346
15 Apr 2005
Opie-memoryapplet v1.2.0-r0 problem
I really do appreciate the ability to increase the swap file size to as much as 64MB with this release. Unfortunately when you try to generate it with the applet the 5600 freezes, so you have to reset it with the battery switch. Could this be caused by the fact that 'mnt' has been changed to 'media' with 3.5.3 and the applet is still using 'mnt'?
2 Jan 2005
This has been discussed on the Zug, irc, and the mailing list but there has never really been a clean solution. I know that none of the developers have a 5600, but it seems to me that the c-750 partitions are very similar. I also know that a single partition would be a kernel hack that the developers don't want.
That said... would it be possible to move /opt to mtdblock3 where /home is, and home to where /opt is or was? It would seem to make a nice setup... more room for apps without symlinks.
If it's not possible to make it flash that way, could someone give me the proper commands on how to do it... after a new flash so there is less to move? I have to flash now anyhow because I have already failed at my attempt to move it.
9 Oct 2008 - 14:58
8 Aug 2008 - 21:10
15 May 2008 - 12:43
19 Feb 2008 - 14:48
Other users have left no comments for Greg2.
There are no friends to display.
|Lo-Fi Version||Time is now: 16th September 2014 - 03:31 AM|