ca1eb doesn't have a personal statement currently.
Gender Not Set
Joined: 6-April 06
Profile Views: 1,260*
Last Seen: 5th July 2008 - 10:35 AM
Local Time: Oct 1 2016, 06:20 AM
28 posts (0 per day)
* Profile views updated each hour
30 May 2008
NOTICE: VTE is very big and fat, and is not suitable for English-only users.
evilvte is in Debian official archive. Just apt-get it. :-)
I noticed that 2or0 (yonggun) uses "sakura" in his rootfs.
sakura is VTE based, so I present another VTE based terminal emulator here.
evilvte is simpler than sakura.
It supports almost everything VTE provides.
It also supports tabs, tabbar autohide, and switch encoding at runtime.
Configuration is via editing source code and recompilation.
However, VTE is very big and fat, and is not suitable for English-only users.
10 Feb 2008
Armel binary is not available now. It is in the building queue 75th currently.
UPDATE: Armel binary is in Debian official now!
Usage and discussion in OESF thread:
5 Feb 2008
It emulates mouse right click in all GTK+ 2.x based applications (including mozilla familly).
Armel binary is not available now. It is in the building queue 139th currently.
Follow up for libgtkstylus armel binary:
29 Jan 2008
Well, everything is Debian official except xserver-xorg-input-tslib.
UPDATE: xserver-xorg-input-tslib is in Debian official now!
You may download the xserver-xorg-input-tslib deb here.
You may get xserver-xorg-input-tslib's upstream source here.
(Get those named xf86-input-tslib*.)
1. It is hard coded to use only /dev/event0 now. You may link /dev/input/event1 or the device you are using to it.
2. It works fine with default resolution 480x640. I have not solve the screen rotation issue yet.
3. My working /etc/X11/xorg.conf section:
Identifier "Configured Mouse"
Option "Device" "/dev/input/event1"
Option "Protocol" "Auto"
26 Jan 2008
Whole new clean debootstrapped Debian EABI (armel) rootfs + Ångström kernel + Sharp bootloader
Everything works great!
However, I only tested it in my SL-C3200.
Step by step:
1. Download installkit
2. Extract the installkit. You will get four files: gnu-tar, hdimage1.tgz, updater.sh, and zImage.bin.
3. Go with Spitz Installation Instructions. NOTICE: my hdimage1.tgz only uses /dev/hda1, so you do not need hda2 and hda3.
During first booting, you may see many fails or errors, please ignore them. It is no harm to the system.
a. After booting, login with "root". No password needed. (NOTICE: Please use "Enter" key, not "OK" key here. We will fix it in next step.)
b. dpkg -i console-tools_0.2.3dbs-65_armel.deb
c. loadkeys keymap-2.6.map
d. dpkg -i device-static-angstrom_2.6.23-1_all.deb
e. dpkg -i etc-angstrom_2.6.23-1_all.deb
f. dpkg -i linux-modules-angstrom_2.6.23-1_armel.deb
g. Setting network. I suggest you use USB networking:modprobe g_ether ; ifup usb0
h. echo nameserver 999.999.999.999 > /etc/resolv.conf (Please use your REAL DNS address to substitute those 999 stuff.)
i. echo 'APT::Install-Recommends "0";' >> /etc/apt/apt.conf.d/70debconf
j. apt-get update
k. apt-get install libts-bin x11-xserver-utils xfonts-base rxvt
l. dpkg -i xserver-kdrive-fbdev_126.96.36.199-r23_armel.deb
m. ts_calibrate (Calibrate your touchscreen)
n. ln -sf /usr/bin/Xfbdev /etc/X11/X
o. X & sleep 5 ; DISPLAY=:0 rxvt &
p. Touch your rxvt and execute: xrandr -o right
q. apt-get install alsa-utils
UPDATE: before alsactl you should do: modprobe snd-soc-spitz
Thanks to kkazakov13.
r. Setting your sound: alsactl -f ./asound.state restore
s. Test the sound: cat /dev/urandom > /dev/dsp (You may press Ctrl+C to stop it.)
t. OK. Everything is finished.
u. Additional settings please see yonggun's masterpiece.
Q: How to use pcmcia network?
A: modprobe pcnet_cs (Thanks to kkazakov13).
Q: How to make the hdimage1.tgz?
A: Please see here. I use the debootstrap package in my i386 machine.
Q: Why you do not use official Debian Xorg packages?
A: Official Debian Xorg is VERY HARD to configure to use the touchscreen. I use the Debian official tslib but not the Xorg.
Q: Why you do not configure everything and put the final rootfs to the installkit?
A: I think it is good for newbies to try making their own Debian rootfs. You can install an Debian or an Ubuntu in QEMU, VirtualBox, or VMware, and make your own rootfs. I have record almost every step here.
Q: What is device-udev-angstrom_2.6.23-1_all.deb?
A: It is for udev users only. You can safely ignore it. If you want to use it, please remove device-static-angstrom first and then install device-udev-angstrom_2.6.23-1_all.deb.
Q: What is device-static-angstrom_2.6.23-1_all.deb?
A: a clean debootstrapped rootfs does not have so many /dev devices. I have to put them in hdimage1.tgz for first booting.
If you want to rollback to the original debootstrapped status, install device-static-angstrom and then remove it. You may see the /dev become VERY clean.
Q: I can not calibrate the touchscreen.
A: It happens if you enable udev in the wrong way. Make sure you have /dev/touchscreen/ucb1x00 and /dev/touchscreen/0, both should point to /dev/input/event1. You may try install device-static-angstrom_2.6.23-1_all.deb again to fix this problem.
Q: My sound sometimes do not working.
A: I tried the sound in scummvm. It plays music and sound effects correctly in most time. However, it become mute sometimes. I do not know why.
10 Mar 2011 - 8:17
5 Nov 2009 - 1:13
29 Nov 2008 - 6:58
5 May 2008 - 0:55
10 Apr 2008 - 5:25
Other users have left no comments for ca1eb.
There are no friends to display.
|Lo-Fi Version||Time is now: 30th September 2016 - 02:20 PM|