Help - Search - Members - Calendar
Full Version: Drivers Working But Anomaly With Ap
OESF Forums > Distros, Development, and Model Specific Forums > Distro Support and Discussion > pdaXrom
gene
I am unable to get my previously working with all revisions of pdaxrom LInksys WCF12 card. I am trying to get onto my home access point with which it had worked before. Encryption is off, so i dont know what the prob could be. The DMESG output is below:

CODE
hostap_cs: detach postponed, 'wlan0' still locked
hostap_cs: Driver unloaded
hostap_crypt: unregistered algorithm 'NULL' (deinit)
pxa_pcmcia_init(0)
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.1.2 - 2003-11-02 (Jouni Malinen <jkmaline@cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=33 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: index 0x01: Vcc 3.3, irq 39, io 0xf6000000-0xf600003f
hostap_cs: Registered netdevice wlan0
prism2_hw_init: initialized in 200 ms
wlan0: trying to read PDA from 0x007f0000: OK
wlan0: NIC: id=0x801b v1.0.0
wlan0: PRI: id=0x15 v1.1.0
wlan0: STA: id=0x1f v1.4.2
wlan0: defaulting to host-based encryption as a workaround for firmware bug in Host AP mode WEP
wlan0: defaulting to bogus WDS frame as a workaround for firmware bug in Host AP mode WDS
wlan0: Warning: secondary station firmware version 1.4.2 does not seem to work in Host AP mode
prism2: wlan0: operating mode changed 3 -> 2
wlan0: LinkStatus=2 (Disconnected)
wlan0: LinkStatus: BSSID=44:44:44:44:44:44
wlan0: LinkStatus=2 (Disconnected)
wlan0: LinkStatus: BSSID=44:44:44:44:44:44
wlan0: LinkStatus=2 (Disconnected)
wlan0: LinkStatus: BSSID=44:44:44:44:44:44
wlan0: LinkStatus=2 (Disconnected)
wlan0: LinkStatus: BSSID=44:44:44:44:44:44
wlan0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
  retry_count=0 tx_rate=0 fc=0x0108 (Data::0 ToDS)
  A1=44:44:44:44:44:44 A2=00:0c:41:18:f0:c0 A3=ff:ff:ff:ff:ff:ff A4=00:00:00:00:00:00
wlan0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
  retry_count=0 tx_rate=0 fc=0x0108 (Data::0 ToDS)
  A1=44:44:44:44:44:44 A2=00:0c:41:18:f0:c0 A3=ff:ff:ff:ff:ff:ff A4=00:00:00:00:00:00
wlan0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
  retry_count=0 tx_rate=0 fc=0x0108 (Data::0 ToDS)
  A1=44:44:44:44:44:44 A2=00:0c:41:18:f0:c0 A3=ff:ff:ff:ff:ff:ff A4=00:00:00:00:00:00
pgas
I have this kind of message also with a pretec card.

I read this http://www.linuxquestions.org/questions/ar...004/02/4/149037

and tried to change a little the position of my Z. Though the distance is < 1 meter all the time the position does make a difference.

I m not sure if it is a problem of the card or of the software. (though I did try with different drivers with the same results)
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2014 Invision Power Services, Inc.