Help - Search - Members - Calendar
Full Version: Can't Compile Scim On Rc11 ...
OESF Forums > Distros, Development, and Model Specific Forums > Distro Support and Discussion > pdaXrom
jiangtao9999
blink.gif
installed ipkgs : gcc + gcc-herders + binutils + make

but I only get this with make :
CODE
make  all-recursive
make[1]: Entering directory `/mnt/cf/scim-1.4.0'
Making all in m4
make[2]: Entering directory `/mnt/cf/scim-1.4.0/m4'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/m4'
Making all in intl
make[2]: Entering directory `/mnt/cf/scim-1.4.0/intl'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/intl'
Making all in src
make[2]: Entering directory `/mnt/cf/scim-1.4.0/src'
if /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../src -I.. -I../src -I../intl -DSCIM_DATADIR=\"/usr/share/scim\" -DSCIM_LOCALEDIR=\"/usr/share/locale\" -DSCIM_SYSCONFDIR=\"/usr/etc\" -DSCIM_LIBEXECDIR=\"/usr/lib/scim-1.0\" -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_MODULE_PATH=\"/usr/lib/scim-1.0\"    -g -O2 -MT scim_backend.lo -MD -MP -MF ".deps/scim_backend.Tpo" -c -o scim_backend.lo scim_backend.cpp; \
then mv -f ".deps/scim_backend.Tpo" ".deps/scim_backend.Plo"; else rm -f ".deps/scim_backend.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../src -I.. -I../src -I../intl -DSCIM_DATADIR=\"/usr/share/scim\" -DSCIM_LOCALEDIR=\"/usr/share/locale\" -DSCIM_SYSCONFDIR=\"/usr/etc\" -DSCIM_LIBEXECDIR=\"/usr/lib/scim-1.0\" -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_MODULE_PATH=\"/usr/lib/scim-1.0\" -g -O2 -MT scim_backend.lo -MD -MP -MF .deps/scim_backend.Tpo -c scim_backend.cpp  -fPIC -DPIC -o .libs/scim_backend.o
In file included from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/cstdio:50,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/armv5tel-cacko-linux/bits/c++io.h:35,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/bits/fpos.h:44,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/iosfwd:49,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/ios:44,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/ostream:45,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/iostream:45,
                from scim.h:193,
                from scim_backend.cpp:33:
/opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/cstddef:52: error: syntax
  error before `long'
make[2]: *** [scim_backend.lo] Error 1
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/mnt/cf/scim-1.4.0'
make: *** [all] Error 2


It's a Input Method , support Chinese (S & T) Korean Japanese ....
wink.gif
cs_jacky
QUOTE(jiangtao9999 @ Sep 13 2005, 11:57 PM)
blink.gif
installed ipkgs : gcc + gcc-herders + binutils + make

but I only get this with make :
CODE
make  all-recursive
make[1]: Entering directory `/mnt/cf/scim-1.4.0'
Making all in m4
make[2]: Entering directory `/mnt/cf/scim-1.4.0/m4'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/m4'
Making all in intl
make[2]: Entering directory `/mnt/cf/scim-1.4.0/intl'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/intl'
Making all in src
make[2]: Entering directory `/mnt/cf/scim-1.4.0/src'
if /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../src -I.. -I../src -I../intl -DSCIM_DATADIR=\"/usr/share/scim\" -DSCIM_LOCALEDIR=\"/usr/share/locale\" -DSCIM_SYSCONFDIR=\"/usr/etc\" -DSCIM_LIBEXECDIR=\"/usr/lib/scim-1.0\" -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_MODULE_PATH=\"/usr/lib/scim-1.0\"    -g -O2 -MT scim_backend.lo -MD -MP -MF ".deps/scim_backend.Tpo" -c -o scim_backend.lo scim_backend.cpp; \
then mv -f ".deps/scim_backend.Tpo" ".deps/scim_backend.Plo"; else rm -f ".deps/scim_backend.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../src -I.. -I../src -I../intl -DSCIM_DATADIR=\"/usr/share/scim\" -DSCIM_LOCALEDIR=\"/usr/share/locale\" -DSCIM_SYSCONFDIR=\"/usr/etc\" -DSCIM_LIBEXECDIR=\"/usr/lib/scim-1.0\" -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_MODULE_PATH=\"/usr/lib/scim-1.0\" -g -O2 -MT scim_backend.lo -MD -MP -MF .deps/scim_backend.Tpo -c scim_backend.cpp  -fPIC -DPIC -o .libs/scim_backend.o
In file included from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/cstdio:50,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/armv5tel-cacko-linux/bits/c++io.h:35,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/bits/fpos.h:44,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/iosfwd:49,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/ios:44,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/ostream:45,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/iostream:45,
                from scim.h:193,
                from scim_backend.cpp:33:
/opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/cstddef:52: error: syntax
  error before `long'
make[2]: *** [scim_backend.lo] Error 1
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/mnt/cf/scim-1.4.0'
make: *** [all] Error 2


It's a Input Method , support Chinese (S & T) Korean Japanese ....
wink.gif
*



Why not use the SCIM 1.0.2 in unstable feed?
jiangtao9999
QUOTE(cs_jacky @ Sep 14 2005, 11:15 AM)
QUOTE(jiangtao9999 @ Sep 13 2005, 11:57 PM)
blink.gif
installed ipkgs : gcc + gcc-herders + binutils + make

but I only get this with make :
CODE
make  all-recursive
make[1]: Entering directory `/mnt/cf/scim-1.4.0'
Making all in m4
make[2]: Entering directory `/mnt/cf/scim-1.4.0/m4'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/m4'
Making all in intl
make[2]: Entering directory `/mnt/cf/scim-1.4.0/intl'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/intl'
Making all in src
make[2]: Entering directory `/mnt/cf/scim-1.4.0/src'
if /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../src -I.. -I../src -I../intl -DSCIM_DATADIR=\"/usr/share/scim\" -DSCIM_LOCALEDIR=\"/usr/share/locale\" -DSCIM_SYSCONFDIR=\"/usr/etc\" -DSCIM_LIBEXECDIR=\"/usr/lib/scim-1.0\" -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_MODULE_PATH=\"/usr/lib/scim-1.0\"    -g -O2 -MT scim_backend.lo -MD -MP -MF ".deps/scim_backend.Tpo" -c -o scim_backend.lo scim_backend.cpp; \
then mv -f ".deps/scim_backend.Tpo" ".deps/scim_backend.Plo"; else rm -f ".deps/scim_backend.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../src -I.. -I../src -I../intl -DSCIM_DATADIR=\"/usr/share/scim\" -DSCIM_LOCALEDIR=\"/usr/share/locale\" -DSCIM_SYSCONFDIR=\"/usr/etc\" -DSCIM_LIBEXECDIR=\"/usr/lib/scim-1.0\" -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_MODULE_PATH=\"/usr/lib/scim-1.0\" -g -O2 -MT scim_backend.lo -MD -MP -MF .deps/scim_backend.Tpo -c scim_backend.cpp  -fPIC -DPIC -o .libs/scim_backend.o
In file included from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/cstdio:50,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/armv5tel-cacko-linux/bits/c++io.h:35,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/bits/fpos.h:44,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/iosfwd:49,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/ios:44,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/ostream:45,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/iostream:45,
                from scim.h:193,
                from scim_backend.cpp:33:
/opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/cstddef:52: error: syntax
  error before `long'
make[2]: *** [scim_backend.lo] Error 1
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/mnt/cf/scim-1.4.0'
make: *** [all] Error 2


It's a Input Method , support Chinese (S & T) Korean Japanese ....
wink.gif
*



Why not use the SCIM 1.0.2 in unstable feed?
*


it include all of the input method mod ?

I need " Zhi Neng Pin Yin " (chinese : 智能拼音) ...
cs_jacky
QUOTE(jiangtao9999 @ Sep 14 2005, 06:17 PM)
QUOTE(cs_jacky @ Sep 14 2005, 11:15 AM)
QUOTE(jiangtao9999 @ Sep 13 2005, 11:57 PM)
blink.gif
installed ipkgs : gcc + gcc-herders + binutils + make

but I only get this with make :
CODE
make  all-recursive
make[1]: Entering directory `/mnt/cf/scim-1.4.0'
Making all in m4
make[2]: Entering directory `/mnt/cf/scim-1.4.0/m4'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/m4'
Making all in intl
make[2]: Entering directory `/mnt/cf/scim-1.4.0/intl'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/intl'
Making all in src
make[2]: Entering directory `/mnt/cf/scim-1.4.0/src'
if /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../src -I.. -I../src -I../intl -DSCIM_DATADIR=\"/usr/share/scim\" -DSCIM_LOCALEDIR=\"/usr/share/locale\" -DSCIM_SYSCONFDIR=\"/usr/etc\" -DSCIM_LIBEXECDIR=\"/usr/lib/scim-1.0\" -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_MODULE_PATH=\"/usr/lib/scim-1.0\"    -g -O2 -MT scim_backend.lo -MD -MP -MF ".deps/scim_backend.Tpo" -c -o scim_backend.lo scim_backend.cpp; \
then mv -f ".deps/scim_backend.Tpo" ".deps/scim_backend.Plo"; else rm -f ".deps/scim_backend.Tpo"; exit 1; fi
g++ -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../src -I.. -I../src -I../intl -DSCIM_DATADIR=\"/usr/share/scim\" -DSCIM_LOCALEDIR=\"/usr/share/locale\" -DSCIM_SYSCONFDIR=\"/usr/etc\" -DSCIM_LIBEXECDIR=\"/usr/lib/scim-1.0\" -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_MODULE_PATH=\"/usr/lib/scim-1.0\" -g -O2 -MT scim_backend.lo -MD -MP -MF .deps/scim_backend.Tpo -c scim_backend.cpp  -fPIC -DPIC -o .libs/scim_backend.o
In file included from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/cstdio:50,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/armv5tel-cacko-linux/bits/c++io.h:35,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/bits/fpos.h:44,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/iosfwd:49,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/ios:44,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/ostream:45,
                from /opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/iostream:45,
                from scim.h:193,
                from scim_backend.cpp:33:
/opt/native/arm/3.3.6-xscale-softvfp/include/c++/3.3.6/cstddef:52: error: syntax
  error before `long'
make[2]: *** [scim_backend.lo] Error 1
make[2]: Leaving directory `/mnt/cf/scim-1.4.0/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/mnt/cf/scim-1.4.0'
make: *** [all] Error 2


It's a Input Method , support Chinese (S & T) Korean Japanese ....
wink.gif
*



Why not use the SCIM 1.0.2 in unstable feed?
*


it include all of the input method mod ?

I need " Zhi Neng Pin Yin " (chinese : 智能拼音) ...
*



There are some Pin Yin input methods. Just try it. It is just an older version.
jiangtao9999
I think getting a lastest version is needed ...
cs_jacky
QUOTE(jiangtao9999 @ Sep 15 2005, 06:12 PM)
I think getting a lastest version is needed ...
*


How can you find this input method? I cannot find it in my Linux box. Is it another additional input module? If yes, I think you only need to compile the input module yourself with scim 1.0.2 and use the scim in the unstable feed.
jiangtao9999
????? huh.gif
SCIM include "Zhi Neng Pin Yin" in MagicLinux.
I think it's in the lastest version.

You can get the lastest version source in : www.scim-im.org
cs_jacky
QUOTE(jiangtao9999 @ Sep 18 2005, 09:21 PM)
????? huh.gif
SCIM include "Zhi Neng Pin Yin" in MagicLinux.
I think it's in the lastest version.

You can get the lastest version source in : www.scim-im.org
*


Are you sure it is in SCIM? I can't find it in the website. I use Gentoo Linux and it don't have this input module as well.

One possibility is MagicLinux packaged this input method for you but the input method is not in SCIM. I am not sure.
jiangtao9999
QUOTE
IMEngines Download
All of the available input methods made by SCIM project are listed here. For the complete list of available input methods (including third party ones), please consult IMEngines .

Note: All of these IMEngine packages are compatible with scim 1.2.x in source code level. But the binary packages may not be compatible with scim 1.2.x binary.

?????
sashz
i added scim 1.4.0 in the build system, what input methods you need?

http://www.scim-im.org/downloads/imengines_download
cs_jacky
Hi sashz,

Thank you very much. I think every pdaXrom scim users will switch to 1.4 soon.

Would you mind to add scim-m17n and scim-tables as well? Thanks in advance.

Jacky
badog
QUOTE(sashz @ Sep 20 2005, 06:09 PM)


Thank you Very Much.

hope skim IME for QT-base-program with scim-base.
sashz
QUOTE(badog @ Sep 20 2005, 07:31 PM)
QUOTE(sashz @ Sep 20 2005, 06:09 PM)


Thank you Very Much.

hope skim IME for QT-base-program with scim-base.
*



please check that and say if that work ok.

Another 2 plugins:

http://212.10.30.205/rc11/Zaurus-7x0-860/f...-1_armv5tel.ipk
http://212.10.30.205/rc11/Zaurus-7x0-860/f...-1_armv5tel.ipk

scim-tables coming soon)
badog
scim-qtimm for QT: http://www.scim-im.org/projects/scim_qtimm
&
scim-tables
jiangtao9999
scim-pinyin

thinks ~~~~
ZDevil
Thanks again for the great efforts.

It would be wonder if there will be other input modules as well (aside from pinyin), like in the previous versions. smile.gif

Thanks!
cs_jacky
QUOTE(ZDevil @ Sep 22 2005, 02:23 AM)
Thanks again for the great efforts.

It would be wonder if there will be other input modules as well (aside from pinyin), like in the previous versions.  smile.gif 

Thanks!
*


Do you mean the scim input modules available in unstable feed?

These modules are scim-tables. Sashz said it will be available soon biggrin.gif .

Thank you very much Sashz laugh.gif
ZDevil
Yes, it's the corresponding updated version of scim-tables. Really looking forward to this! biggrin.gif
badog
QUOTE(badog @ Sep 21 2005, 09:42 AM)
scim-qtimm for QT:  http://www.scim-im.org/projects/scim_qtimm
&
scim-tables
*


do we have to wait long time?
badog
???
cs_jacky
QUOTE(badog @ Sep 25 2005, 01:07 AM)
???
*


Hey man, it is weekends! Give him some time to relex (although I am waiting for the module so that I can migrate to RC11 laugh.gif ).
jiangtao9999
Oh ....
I can't compile scim 1.4.2 in RC11 , too.

Why ?????
unsure.gif
john4
Thank you very much Sashz!
badog
top to top
john4
U r my god,sashz!thank you very much!
jiangtao9999
thanks ~~~~

And I want to know how you compiled it ?
SDK of RC11 ?
badog
thanks very much!!

please compile SCIM-QTimm.again.
scim-qtimm for QT:
-> http://www.scim-im.org/projects/scim_qtimm
john4
Overall ,it runs very well,the Pinyin is perfect.but it seems run much slowlier than the old version ,and try to launch being accompany with every Applications.
My Z is SL-7500C.Is there any possible to make it faster by tuning the configuration file?

Looking forward to your solution.My lord!
takuan
request: i would really like support for japanese (uim)
sashz, if you're compiling other plugins please compile the scim-uim!!
thanks so much!
jiangtao9999
Oh....
It can't input Chinese in SciTE ...
But it can input in AbiWord .

&& It seems can't br used in GTK1 .
asura
Request for scim-m17n.

The sole language that I need to add is Tibetan which is under scim-m17n support version is 0.1.3 input method "bo-wylie".

Reference:
http://www.freedesktop.org/wiki/Software_2...SupportLanguage

Many thanks rolleyes.gif
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2014 Invision Power Services, Inc.