Full Version: Orinoco Drivers?
OESF Forums > Distros, Development, and Model Specific Forums > Model Specific Forums > C1000/3x00 Hardware
Has anybody seen drivers for the Lucent Orinoco wifi cards?? I happen to have a 3.3 volt silver card and wanted to use it with the Z.
QUOTE(BarryW @ Jul 4 2006, 11:07 AM)
Has anybody seen drivers for the Lucent Orinoco wifi cards?? I happen to have a 3.3 volt silver card and wanted to use it with the Z.
I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
QUOTE(sidmoraes @ Jul 4 2006, 02:15 PM)
QUOTE(BarryW @ Jul 4 2006, 11:07 AM)
Has anybody seen drivers for the Lucent Orinoco wifi cards?? I happen to have a 3.3 volt silver card and wanted to use it with the Z.
I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
Did you have to reconfigure anything for it?? I plug mine in and it says hey look a Lucent card! The wireless applet doesn't see it though.
QUOTE(BarryW @ Jul 4 2006, 03:55 PM)
QUOTE(sidmoraes @ Jul 4 2006, 02:15 PM)
QUOTE(BarryW @ Jul 4 2006, 11:07 AM)
Has anybody seen drivers for the Lucent Orinoco wifi cards?? I happen to have a 3.3 volt silver card and wanted to use it with the Z.
I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
Did you have to reconfigure anything for it?? I plug mine in and it says hey look a Lucent card! The wireless applet doesn't see it though.
give me some infos, output of these commands:
lsmod
cardctl ident
QUOTE(sidmoraes @ Jul 6 2006, 11:03 AM)
QUOTE(BarryW @ Jul 4 2006, 03:55 PM)
QUOTE(sidmoraes @ Jul 4 2006, 02:15 PM)
QUOTE(BarryW @ Jul 4 2006, 11:07 AM)
Has anybody seen drivers for the Lucent Orinoco wifi cards?? I happen to have a 3.3 volt silver card and wanted to use it with the Z.
I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
Did you have to reconfigure anything for it?? I plug mine in and it says hey look a Lucent card! The wireless applet doesn't see it though.
give me some infos, output of these commands:
lsmod
cardctl ident
$ cardctl ident
Socket 0:
produce info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", ""
manfid: 0x0156, 0x0002
function" 6 (network)
lsmod
pxa_bi
net_fd
usbdcore
bluez
usbdmonitor
usb-monitor
sharp_mmcsd_m
bvdd
QUOTE(BarryW @ Jul 7 2006, 06:53 AM)
QUOTE(sidmoraes @ Jul 6 2006, 11:03 AM)
QUOTE(BarryW @ Jul 4 2006, 03:55 PM)
QUOTE(sidmoraes @ Jul 4 2006, 02:15 PM)
QUOTE(BarryW @ Jul 4 2006, 11:07 AM)
Has anybody seen drivers for the Lucent Orinoco wifi cards?? I happen to have a 3.3 volt silver card and wanted to use it with the Z.
I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
Did you have to reconfigure anything for it?? I plug mine in and it says hey look a Lucent card! The wireless applet doesn't see it though.
give me some infos, output of these commands:
lsmod
cardctl ident
$ cardctl ident
Socket 0:
produce info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", ""
manfid: 0x0156, 0x0002
function" 6 (network)
lsmod
pxa_bi
net_fd
usbdcore
bluez
usbdmonitor
usb-monitor
sharp_mmcsd_m
bvdd
Include these lines in "/etc/pcmcia/config", after this, reboot :
card "Lucent Technologies"
manfid 0x0156, 0x0002
bind "orinoco_cs"
QUOTE(sidmoraes @ Jul 7 2006, 03:39 PM)
QUOTE(BarryW @ Jul 7 2006, 06:53 AM)
QUOTE(sidmoraes @ Jul 6 2006, 11:03 AM)
QUOTE(BarryW @ Jul 4 2006, 03:55 PM)
QUOTE(sidmoraes @ Jul 4 2006, 02:15 PM)
QUOTE(BarryW @ Jul 4 2006, 11:07 AM)
Has anybody seen drivers for the Lucent Orinoco wifi cards?? I happen to have a 3.3 volt silver card and wanted to use it with the Z.
I have a Pcmcia Orinoco card, and use it with a pcmcia to cf adapter. I don't need to install a module for this.
Did you have to reconfigure anything for it?? I plug mine in and it says hey look a Lucent card! The wireless applet doesn't see it though.
give me some infos, output of these commands:
lsmod
cardctl ident
$ cardctl ident
Socket 0:
produce info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", ""
manfid: 0x0156, 0x0002
function" 6 (network)
lsmod
pxa_bi
net_fd
usbdcore
bluez
usbdmonitor
usb-monitor
sharp_mmcsd_m
bvdd
Include these lines in "/etc/pcmcia/config", after this, reboot :
card "Lucent Technologies"
manfid 0x0156, 0x0002
bind "orinoco_cs"
Still nothing. Are you using cacko light of full?
Include these lines in your /etc/pcmcia/config :
card "Lucent Technologies"
manfid 0x0156, 0x0002
bind "orinoco_cs"
card "Lucent Technologies"
manfid 0x0156, 0x0002
bind "orinoco_cs"
QUOTE(sidmoraes @ Jul 8 2006, 03:52 AM)
Include these lines in your /etc/pcmcia/config :
card "Lucent Technologies"
manfid 0x0156, 0x0002
bind "orinoco_cs"
card "Lucent Technologies"
manfid 0x0156, 0x0002
bind "orinoco_cs"
I did, still doesn't work.
I use cacko full.
What version did you use?
What version did you use?
Lite.
Okay, I just flashed Cacko full. Still no joy.
Okay, I just flashed Cacko full. Still no joy.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.