Help - Search - Members - Calendar
Full Version: Cell Ir Beta3 Help?
OESF Forums > Distros, Development, and Model Specific Forums > Distro Support and Discussion > pdaXrom
adf
This page has a nice howto on how to connect via windows on a laptop.

I followed the directions as far as seemed possible... putting in the init string, username and password

I try pppd -d. a paatern of text types out, repeats a few times and stops/ crashin (locking up) the terminal--aterm or rxvt)

it seems that IR is simply not working, but I really can't tell. I have the haunting feeling that I'm missing something obvious.

help? (yes, I searched the forum...and mostly found other people who coudn't connect or whose solutions seemed not to apply)
Chero
QUOTE(adf @ Sep 4 2006, 08:56 AM)
This page has a nice howto on how to connect via windows on a laptop.

I followed the directions as far as seemed possible... putting in the init string, username and password

I try pppd -d.  a paatern of text types out, repeats a few times and stops/ crashin (locking up) the terminal--aterm or rxvt)

it seems that IR is simply not working, but I really can't tell.  I have the haunting feeling that I'm missing something obvious.

help? (yes, I searched the forum...and mostly found other people who coudn't connect or whose solutions seemed not to apply)
*


did you try "/etc/rc.d/init.d/irda start" first ?

Chero.
adf
QUOTE(Chero @ Sep 4 2006, 10:13 AM)
QUOTE(adf @ Sep 4 2006, 08:56 AM)
This page has a nice howto on how to connect via windows on a laptop.

I followed the directions as far as seemed possible... putting in the init string, username and password

I try pppd -d.  a paatern of text types out, repeats a few times and stops/ crashin (locking up) the terminal--aterm or rxvt)

it seems that IR is simply not working, but I really can't tell.  I have the haunting feeling that I'm missing something obvious.

help? (yes, I searched the forum...and mostly found other people who coudn't connect or whose solutions seemed not to apply)
*


did you try "/etc/rc.d/init.d/irda start" first ?

lmao.... a very good idea, which I blithely omtted

Chero.
*

adf
no joy. starting irda 1st certainly starts irda ( a good start lol), but pppd -d or pppd modem have the same result..... string o symbols repeted then a locked term.

any other ideas? there is also the usb option, but it seems dependant on a windows drdiver....
Chero
QUOTE(adf @ Sep 4 2006, 07:14 PM)
no joy.  starting irda 1st certainly starts irda ( a good start lol), but pppd -d or pppd modem have the same result.....  string o symbols repeted then a locked term.

any other ideas?  there is also the usb option, but it seems dependant on a windows drdiver....
*


have you tried using gnokii ?
karlto
I have this working on my SL6000, and I discovered that I couldn't get it to work using ppp from the shell - for some reason I have to use the pppdialer app. On the command line everything appears to work until it stops just short of actually doing anything!

It's exactly the opposite of wireless etc which can't be configured with graphical tools - the only way this would work is to use the tools straight out of the box...
adf
using the ppp dialer, I get:

(+cgdcont=1,"IP","cellular1wap,"",0,0^M)
expect (OK)
alarm
Failed
Connect script failed.



This isn't terribly useful to me-- I have no real idea if the phone isn't getting the ir signal, if I'm using a wrong APN. protocol, connect speed, etc.

Ideas on how to get more info?? (or how to make it work if anyone has a blinding flash of insight....?)
adf
QUOTE(Chero @ Sep 4 2006, 06:44 PM)
QUOTE(adf @ Sep 4 2006, 07:14 PM)
no joy.  starting irda 1st certainly starts irda ( a good start lol), but pppd -d or pppd modem have the same result.....  string o symbols repeted then a locked term.

any other ideas?  there is also the usb option, but it seems dependant on a windows drdiver....
*


have you tried using gnokii ?
*


not yet... trying the pppdialer. In theory, my nokia is coming back in the mail....
adf
bump
using the ppp dialer, I get:

(+cgdcont=1,"IP","cellular1wap,"",0,0^M)
expect (OK)
alarm
Failed
Connect script failed.



This isn't terribly useful to me-- I have no real idea if the phone isn't getting the ir signal, if I'm using a wrong APN. protocol, connect speed, etc.

Ideas on how to get more info?? (or how to make it work if anyone has a blinding flash of insight....?)
karlto
QUOTE(adf @ Sep 5 2006, 11:50 AM)
bump
using the ppp dialer, I get:

(+cgdcont=1,"IP","cellular1wap,"",0,0^M)
expect (OK)
alarm
Failed
Connect script failed.



This isn't terribly useful to me-- I have no real idea if the phone isn't getting the ir signal, if I'm using a wrong APN. protocol, connect speed, etc.

Ideas on how to get more info??  (or how to make it work if anyone has a blinding flash of insight....?)
*

Put "debug" and "dump" in your ppp options file to get more info. By the looks of it, Chero's answer was closer than mine - the Zaurus isn't getting any response from the phone...
adf
QUOTE(karlto @ Sep 5 2006, 04:43 AM)
QUOTE(adf @ Sep 5 2006, 11:50 AM)
bump
using the ppp dialer, I get:

(+cgdcont=1,"IP","cellular1wap,"",0,0^M)
expect (OK)
alarm
Failed
Connect script failed.



This isn't terribly useful to me-- I have no real idea if the phone isn't getting the ir signal, if I'm using a wrong APN. protocol, connect speed, etc.

Ideas on how to get more info??  (or how to make it work if anyone has a blinding flash of insight....?)
*

Put "debug" and "dump" in your ppp options file to get more info. By the looks of it, Chero's answer was closer than mine - the Zaurus isn't getting any response from the phone...
*


I guess I'll gove gnokii a shot then

edit: suggestions about where I start with gnokii?? gnokii --monitor? --sndtmfstring?

I really have no clue here. I'm pretty sure I don't want to talk to the todo list, though...
daniel3000
QUOTE(adf @ Sep 5 2006, 12:50 AM)
bump
using the ppp dialer, I get:

(+cgdcont=1,"IP","cellular1wap,"",0,0^M)
expect (OK)
alarm
Failed
Connect script failed.



This isn't terribly useful to me-- I have no real idea if the phone isn't getting the ir signal, if I'm using a wrong APN. protocol, connect speed, etc.

Ideas on how to get more info??  (or how to make it work if anyone has a blinding flash of insight....?)
*


I also got this error when I tried to configure my Nolkia 6310 for GPRS over IrDA.
The workaround is as follows:
Configure the settings which you would give via AT+cgdcont directly in the phone (GPRS access point, APN or similar, just enter the string "cellular1wap" in the corresponding phone config dialog.). There are several "slots" for such configurations. If the first one is free, use that one.
Then, use only "ATZ" as the init string, and use the dial string *99***1# (where 1 is the number of that "slot", so use 2 if you used the second "slot" for example).

Seems as if the Nokia phones have some problem with thie cgdcont string.

Good luck!
daniel
adf
ok.. that kinda did something... the Z seemed to occasionally "see" the phoine--though I think I might be wrong about how the phone contacts the isp.

anyway, here is the log from querying the modem in windows 2000. Maybe it will give someone a flash of insight? So far, I'm still not getting the Z to connect.

09-13-2006 17:35:27.796 - File: C:\WINNT\system32\unimdm.tsp, Version 5.0.2195 - Retail
09-13-2006 17:35:27.796 - File: C:\WINNT\system32\unimdmat.dll, Version 5.0.2195 - Retail
09-13-2006 17:35:27.796 - File: C:\WINNT\system32\uniplat.dll, Version 5.0.2195 - Retail
09-13-2006 17:35:27.796 - File: C:\WINNT\system32\drivers\modem.sys, Version 5.0.2195 - Retail
09-13-2006 17:35:27.796 - File: C:\WINNT\system32\modemui.dll, Version 5.0.2195 - Retail
09-13-2006 17:35:27.796 - Modem type: Sierra Wireless USB Modem
09-13-2006 17:35:27.796 - Modem inf path: oem15.inf
09-13-2006 17:35:27.796 - Modem inf section: Modem1
09-13-2006 17:35:27.796 - 230400,8,N,1, ctsfl=1, rtsctl=2
09-13-2006 17:35:27.812 - Initializing modem.
09-13-2006 17:35:27.812 - DSR is low while initializing the modem. Verify modem is turned on.
09-13-2006 17:35:27.812 - CTS is low while initializing modem.
09-13-2006 17:35:27.828 - Send: AT<cr>
09-13-2006 17:35:27.828 - Recv: <cr><lf>OK<cr><lf>
09-13-2006 17:35:27.828 - Interpreted response: OK
09-13-2006 17:35:27.843 - Send: ATL0M1X4<cr>
09-13-2006 17:35:27.843 - Recv: <cr><lf>OK<cr><lf>
09-13-2006 17:35:27.843 - Interpreted response: OK
09-13-2006 17:35:27.859 - Send: AT+cdcont=1,"IP","cellular1wap","",0,0<cr>
09-13-2006 17:35:27.859 - Recv: <cr><lf>ERROR<cr><lf>
09-13-2006 17:35:27.859 - Interpreted response: Error
09-13-2006 17:35:27.859 - Session Statistics:
09-13-2006 17:35:27.859 - Reads : 0 bytes
09-13-2006 17:35:27.859 - Writes: 0 bytes


I think the "cellular1wap" bit is wrong....
desertrat
Does this thread help?
http://www.oesf.org/forums/index.php?showtopic=21412
karlto
Perhaps you've already tried this, but maybe there is a simple problem...

Windows:
QUOTE(adf @ Sep 14 2006, 02:43 PM)
09-13-2006 17:35:27.859 - Send: AT+cdcont=1,"IP","cellular1wap","",0,0<cr>

Zaurus:
QUOTE(adf @ Sep 5 2006, 11:50 AM)
(+cgdcont=1,"IP","cellular1wap,"",0,0^M)

... is missing the 'AT' at the start (Windows usually puts this in automatically, but mostly Linux/pppd just does exactly what you tell it). pppd times out waiting for a response because the phone won't respond to anything without an AT...

I also see you're missing a closing quote, but maybe that's just a typo?
adf
QUOTE(karlto @ Sep 14 2006, 03:50 AM)
Perhaps you've already tried this, but maybe there is a simple problem...

Windows:
QUOTE(adf @ Sep 14 2006, 02:43 PM)
09-13-2006 17:35:27.859 - Send: AT+cdcont=1,"IP","cellular1wap","",0,0<cr>

Zaurus:
QUOTE(adf @ Sep 5 2006, 11:50 AM)
(+cgdcont=1,"IP","cellular1wap,"",0,0^M)

... is missing the 'AT' at the start (Windows usually puts this in automatically, but mostly Linux/pppd just does exactly what you tell it). pppd times out waiting for a response because the phone won't respond to anything without an AT...

I also see you're missing a closing quote, but maybe that's just a typo?
*


Thanks!
Got it in windows (wrong APN) that seems to have been a typo.... I had wondered about the AT.

I'll mess with it more on the Z now that I know I can connect with it.
Of course, on the Z it will have to be IR,I think. It uses some proprietary windriver on usb. Maybe it can be probed and deciphered?? I guess that can wait til I try ir on the Z.

written from windows connected via the cell--making progress.
karlto
QUOTE(adf @ Sep 14 2006, 04:58 PM)
I'll mess with it more on the Z now that I know I can connect with it.
Of course, on the Z it will have to be IR,I think.  It uses some proprietary windriver on usb.  Maybe it can be probed and deciphered??  I guess that can wait til I try ir on the Z.

I use my Nokia via USB with my Linux laptop, but no-go with the Z as yet due to the older kernel not having the USB stuff up to scratch. Probably a lot more likely with beta4 (for those who can run it...)
adf
QUOTE(karlto @ Sep 14 2006, 04:22 AM)
QUOTE(adf @ Sep 14 2006, 04:58 PM)
I'll mess with it more on the Z now that I know I can connect with it.
Of course, on the Z it will have to be IR,I think.  It uses some proprietary windriver on usb.  Maybe it can be probed and deciphered??  I guess that can wait til I try ir on the Z.

I use my Nokia via USB with my Linux laptop, but no-go with the Z as yet due to the older kernel not having the USB stuff up to scratch. Probably a lot more likely with beta4 (for those who can run it...)
*


... but so much other stuff is less likely in beta4..... so far.

now I'm getting hangup, no carriewr errors. ideas?
adf
QUOTE(adf @ Sep 15 2006, 03:23 AM)
QUOTE(karlto @ Sep 14 2006, 04:22 AM)
QUOTE(adf @ Sep 14 2006, 04:58 PM)
I'll mess with it more on the Z now that I know I can connect with it.
Of course, on the Z it will have to be IR,I think.  It uses some proprietary windriver on usb.  Maybe it can be probed and deciphered??  I guess that can wait til I try ir on the Z.

I use my Nokia via USB with my Linux laptop, but no-go with the Z as yet due to the older kernel not having the USB stuff up to scratch. Probably a lot more likely with beta4 (for those who can run it...)
*


... but so much other stuff is less likely in beta4..... so far.

now I'm getting hangup, no carriewr errors. ideas?
*


how do i turn off header compression on the Z? shoud i?

I'm gettingLCP terminated by peer?
adf
Here is what i get (ok, i copied a few attempts) Can anyone help me figure out why my connection is being terminated? I read on a mac forum that tcpip header compression can do something like this...Help?:


abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
AT +cgdcont=1,"IP","gci.com","",0,0^M^M
OK
-- got it

send (ATDT*99#^M)
expect (CONNECT)
^M
ATDT*99#^M^M
CONNECT
-- got it

Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/ircomm
rcvd [LCP ConfReq id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x4867124f> <auth chap MD5>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe61337e7> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x4867124f> <auth chap MD5>]
rcvd [LCP ConfNak id=0x1 <asyncmap 0xa0000>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0xe61337e7> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000> <magic 0xe61337e7> <pcomp> <accomp>]
rcvd [CHAP Challenge id=0x1 <4f289244f7623d4126a27045dbea295118396a63>, name = ""]
sent [CHAP Response id=0x1 <92cb840c1341f26dbf368ead5fec74f8>, name = "zaurus"]
rcvd [CHAP Success id=0x1 ""]
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP ProtRej id=0x4 80 fd 01 01 00 0f 1a 04 78 00 18 04 78]
rcvd [LCP TermReq id=0x5]
LCP terminated by peer
sent [LCP TermAck id=0x5]
Connection terminated.
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
^M
NO CARRIER
-- failed
Failed (NO CARRIER)
Connect script failed
Modem hangup
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
AT +cgdcont=1,"IP","gci.com","",0,0^M^M
OK
-- got it

send (ATDT*99#^M)
expect (CONNECT)
^M
ATDT*99#^M^M
CONNECT
-- got it

Serial connection established.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/ircomm
rcvd [LCP ConfReq id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x59eb7bdd> <auth chap MD5>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x13a1dff3> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x59eb7bdd> <auth chap MD5>]
rcvd [LCP ConfNak id=0x1 <asyncmap 0xa0000>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x13a1dff3> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000> <magic 0x13a1dff3> <pcomp> <accomp>]
rcvd [CHAP Challenge id=0x1 <8f317c27eb809cf94f55c352bab2f2322b952799>, name = ""]
sent [CHAP Response id=0x1 <db52bc8aaead35d3940fec48f35da21a>, name = "adfour"]
rcvd [CHAP Success id=0x1 ""]
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP ProtRej id=0x4 80 fd 01 01 00 0f 1a 04 78 00 18 04 78]
rcvd [LCP TermReq id=0x5]
LCP terminated by peer
sent [LCP TermAck id=0x5]
Connection terminated.
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
^M
NO CARRIER
-- failed
Failed (NO CARRIER)
Connect script failed
Modem hangup
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
alarm
Failed
Connect script failed
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
AT +cgdcont=1,"IP","gci.com","",0,0^M^M
OK
-- got it

send (ATDT*99#^M)
expect (CONNECT)
^M
ATDT*99#^M^M
CONNECT
-- got it

Serial connection established.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/ircomm
rcvd [LCP ConfReq id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x3ea43ba5> <auth chap MD5>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb34a5cfe> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x3ea43ba5> <auth chap MD5>]
rcvd [LCP ConfNak id=0x1 <asyncmap 0xa0000>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0xb34a5cfe> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000> <magic 0xb34a5cfe> <pcomp> <accomp>]
rcvd [CHAP Challenge id=0x1 <ff638724f1a6fcab69f1f83869427bcdef9a8569>, name = ""]
sent [CHAP Response id=0x1 <d09ea0402440123602147ecbe894df38>, name = "adfour"]
rcvd [CHAP Success id=0x1 ""]
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP ProtRej id=0x4 80 fd 01 01 00 0f 1a 04 78 00 18 04 78]
rcvd [LCP TermReq id=0x5]
LCP terminated by peer
sent [LCP TermAck id=0x5]
Connection terminated.
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
^M
NO CARRIER
-- failed
Failed (NO CARRIER)
Connect script failed
Modem hangup
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
AT +cgdcont=1,"IP","gci.com","",0,0^M^M
OK
-- got it

send (ATDT*99#^M)
expect (CONNECT)
^M
ATDT*99#^M^M
CONNECT
-- got it

Serial connection established.
using channel 6
Using interface ppp0
Connect: ppp0 <--> /dev/ircomm
rcvd [LCP ConfReq id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0xdf161f40> <auth chap MD5>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x6aa97d90> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0xdf161f40> <auth chap MD5>]
rcvd [LCP ConfNak id=0x1 <asyncmap 0xa0000>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x6aa97d90> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000> <magic 0x6aa97d90> <pcomp> <accomp>]
rcvd [CHAP Challenge id=0x1 <d4a261c88f6f1f58d14365ef9a1d318deaff8533>, name = ""]
sent [CHAP Response id=0x1 <fb49a6c1b0c3777ba34aef1082c09ec1>, name = "adfour"]
rcvd [CHAP Success id=0x1 ""]
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP ProtRej id=0x4 80 fd 01 01 00 0f 1a 04 78 00 18 04 78]
rcvd [LCP TermReq id=0x5]
LCP terminated by peer
sent [LCP TermAck id=0x5]
Connection terminated.
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
^M
NO CARRIER
-- failed
Failed (NO CARRIER)
Connect script failed
Modem hangup
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
AT +cgdcont=1,"IP","gci.com","",0,0^M^M
OK
-- got it

send (ATDT*99#^M)
expect (CONNECT)
^M
ATDT*99#^M^M
CONNECT
-- got it

Serial connection established.
using channel 7
Using interface ppp0
Connect: ppp0 <--> /dev/ircomm
rcvd [LCP ConfReq id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x4c7ef4c2> <auth chap MD5>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb0214ece> <pcomp> <accomp>]
sent [LCP ConfAck id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x4c7ef4c2> <auth chap MD5>]
rcvd [LCP ConfNak id=0x1 <asyncmap 0xa0000>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0xb0214ece> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000> <magic 0xb0214ece> <pcomp> <accomp>]
rcvd [CHAP Challenge id=0x1 <e85fdf1fd8c19204cea94c70cc190e63d10fd6dd>, name = ""]
sent [CHAP Response id=0x1 <bd2e0a9b50e08296d23d5fd8e9e9cee6>, name = "zaurus"]
rcvd [CHAP Success id=0x1 ""]
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP ProtRej id=0x4 80 fd 01 01 00 0f 1a 04 78 00 18 04 78]
rcvd [LCP TermReq id=0x5]
LCP terminated by peer
sent [LCP TermAck id=0x5]
Connection terminated.
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
^M
NO CARRIER
-- failed
Failed (NO CARRIER)
Connect script failed
Modem hangup
karlto
QUOTE(adf @ Sep 16 2006, 06:17 AM)
Here is what i get (ok, i copied a few attempts) Can anyone help me figure out why my connection is being terminated? I read on a mac forum that tcpip header compression can do something like this...Help?:

<snip>

sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP ProtRej id=0x4 80 fd 01 01 00 0f 1a 04 78 00 18 04 78]
rcvd [LCP TermReq id=0x5]
LCP terminated by peer
sent [LCP TermAck id=0x5]
Connection terminated.

<snip>

The above lines are the guts of the problem. After successfully connecting and authenticating, protocol negotiation takes place. The first two lines above are your machine telling the remote one that you need various compression etc turned on. The rcvd lines are the remote machine rejecting the protocol negotiation and telling you to disconnect.

Normally a basic ppp modem connection (such as this) doesn't use any compression or extra settings - just straight out unencrypted and uncompressed data. What settings do you have in your /etc/ppp/options file? Or other ppp settings files?

From what I can see, you're 99% of the way there - just a matter of ppp configuration.
adf
QUOTE(karlto @ Sep 17 2006, 04:52 AM)
QUOTE(adf @ Sep 16 2006, 06:17 AM)
Here is what i get (ok, i copied a few attempts) Can anyone help me figure out why my connection is being terminated? I read on a mac forum that tcpip header compression can do something like this...Help?:

<snip>

sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP ProtRej id=0x4 80 fd 01 01 00 0f 1a 04 78 00 18 04 78]
rcvd [LCP TermReq id=0x5]
LCP terminated by peer
sent [LCP TermAck id=0x5]
Connection terminated.

<snip>

The above lines are the guts of the problem. After successfully connecting and authenticating, protocol negotiation takes place. The first two lines above are your machine telling the remote one that you need various compression etc turned on. The rcvd lines are the remote machine rejecting the protocol negotiation and telling you to disconnect.

Normally a basic ppp modem connection (such as this) doesn't use any compression or extra settings - just straight out unencrypted and uncompressed data. What settings do you have in your /etc/ppp/options file? Or other ppp settings files?

From what I can see, you're 99% of the way there - just a matter of ppp configuration.
*


that's what I thought, too.

afaik I have no compresion turned on in ppp. My impression was that somehow the z was trying to do compression" by default. I'll poke around and post the settings. Hopefully this is simple. Thanks for the help-- a little more, and I think I'll have it.

BTW maybe a pdaX cellphone wiki or howto might be a good idea?
karlto
QUOTE(adf @ Sep 17 2006, 05:57 PM)
that's what I thought, too.

afaik I have no compresion turned on in ppp. My impression was that somehow the z was trying to do compression"  by default.  I'll poke around and post the settings.  Hopefully this is simple. Thanks for the help-- a little more, and I think I'll have it.

BTW maybe a pdaX cellphone wiki or howto might  be a good idea?
*

You could always post the contents of your /etc/ppp/options and /etc/ppp/peers/<xx> files so we can have a look.

By the time you get it working, you'll have all the info you need to add it to the wiki... smile.gif
adf
in peers/voq I have this. you can see switches I tried to add to no avail under the modem line

/dev/ircomm
115200
connect '/usr/sbin/chat -s -v ABORT "NO CARRIER" ABORT "NO DIALTONE" ABORT "BUSY" "" "AT +cgdcont=1,\\"IP\\",\\"gci.com\\",\\"\\",0,0" OK ATDT*99# CONNECT'
crtscts
noipdefault
modem
-ac
-pc
-vj
usepeerdns
defaultroute
connect-delay 58000
remotename voq


/ppp/options.pptp --maybe I should do something here?

###############################################################################
# $Id: options.pptp,v 1.1 2005/02/18 01:40:23 quozl Exp $
#
# Sample PPTP PPP options file /etc/ppp/options.pptp
# Options used by PPP when a connection is made by a PPTP client.
# This file can be referred to by an /etc/ppp/peers file for the tunnel.
# Changes are effective on the next connection. See "man pppd".
#
# You are expected to change this file to suit your system. As
# packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/
# and the kernel MPPE module available from the CVS repository also on
# http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe.
###############################################################################

# Lock the port
lock

# Authentication
# We don't need the tunnel server to authenticate itself
noauth

# We won't do EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2
refuse-eap
refuse-chap
refuse-mschap

# Compression
# Turn off compression protocols we know won't be used
nobsdcomp
nodeflate

# Encryption
# (There have been multiple versions of PPP with encryption support,
# choose with of the following sections you will use. Note that MPPE
# requires the use of MSCHAP-V2 during authentication)

# http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras
# ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o
# {{{
# Require MPPE 128-bit encryption
require-mppe-128
# }}}

# http://polbox.com/h/hs001/ fork from PPP project by Jan Dubiec
# ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o
# {{{
# Require MPPE 128-bit encryption
#mppe required,stateless
# }}}


and options.ttyS0

#/etc/ppp/options
#
idle 30
-detach
asyncmap 0
crtscts
local
lock
115200
#connect-delay 6000
novj
:192.168.0.245

the last 2 lines were a wild guess based on an osX forum.

hopefully we can find the solution here.
desertrat
QUOTE(adf @ Sep 18 2006, 03:01 AM)
crtscts

As you're using IR this should be an invalid option (if you invoke pppd manually you'll see an error). You should replace it with "nocrtscts".
karlto
QUOTE(desertrat @ Sep 18 2006, 04:53 PM)
QUOTE(adf @ Sep 18 2006, 03:01 AM)
crtscts

As you're using IR this should be an invalid option (if you invoke pppd manually you'll see an error). You should replace it with "nocrtscts".
*


Actually this works fine for me using IR - the mobile phone is surprisingly transparent when used as a modem.

I don't think you need the last two lines you talked about though (novj and the IP address), although the settings in peers/voq might take precedence anyway. All the other lines in options.ttyS0 look fine; what do the -ac, -pc, -vj options do?

You should be able to ignore the options.pptp file as it's not being used here.
adf
QUOTE(karlto @ Sep 18 2006, 04:21 AM)
QUOTE(desertrat @ Sep 18 2006, 04:53 PM)
QUOTE(adf @ Sep 18 2006, 03:01 AM)
crtscts

As you're using IR this should be an invalid option (if you invoke pppd manually you'll see an error). You should replace it with "nocrtscts".
*


Actually this works fine for me using IR - the mobile phone is surprisingly transparent when used as a modem.

I don't think you need the last two lines you talked about though (novj and the IP address), although the settings in peers/voq might take precedence anyway. All the other lines in options.ttyS0 look fine; what do the -ac, -pc, -vj options do?

You should be able to ignore the options.pptp file as it's not being used here.
*


in theory theay are switches that turn off various bits of compression. in practice they seem to do nothing at all... possible inline with pppd they might have an effect.
The problem is, it looks ok ,but doesn't work smile.gif

I was thinkinking thant this bit :
# Compression
# Turn off compression protocols we know won't be used
nobsdcomp
nodeflate

is the problem

see-- we still get:
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]

right before the disconnect.

makes me think either this setting has no effect and should, or I am seeing it backwards and I should turn compression ON.

should this be pasted into the peers/voq stuff?
karlto
QUOTE(adf @ Sep 18 2006, 06:36 PM)
I was thinkinking thant this bit :
# Compression
# Turn off compression protocols we know won't be used
nobsdcomp
nodeflate

is the problem

see-- we still get:
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]

Good point - those settings aren't working because they're in the options file for pptp, not for voq. Judging by the output of ppp, you're probably right in thinking that adding nodeflate and nobsdcomp to the peers/voq file might just work...
adf
so I'm still working on this.... here is the latest output/ notice the word "zaurus" by chap auth, followed by ms-dns stuff with 0.0.0.0 addresses and a quick disconnect. Help?

abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
AT +cgdcont=1,"IP","gci.com","",0,0^M^M
OK
-- got it

send (ATDT*99#^M)
expect (CONNECT)
^M
ATDT*99#^M^M
CONNECT
-- got it

Serial connection established.
using channel 6
Using interface ppp0
Connect: ppp0 <--> /dev/ircomm
rcvd [LCP ConfReq id=0x3 <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x3938668f> <auth chap MD5>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xd27fcbc9>]
sent [LCP ConfRej id=0x3 <pcomp> <accomp>]
rcvd [LCP ConfNak id=0x1 <asyncmap 0xa0000>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0xd27fcbc9>]
rcvd [LCP ConfReq id=0x5 <asyncmap 0xa0000> <magic 0x3938668f> <auth chap MD5>]
sent [LCP ConfAck id=0x5 <asyncmap 0xa0000> <magic 0x3938668f> <auth chap MD5>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000> <magic 0xd27fcbc9>]
rcvd [CHAP Challenge id=0x1 <5bcddb7fb065983f53cda3ce4603fd2c8808a659>, name = ""]
sent [CHAP Response id=0x1 <cf1426c20f4a425043e46be87d18a450>, name = "zaurus"]
rcvd [CHAP Success id=0x1 ""]
CHAP authentication succeeded
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP TermReq id=0x5]
LCP terminated by peer
sent [LCP TermAck id=0x5]
Connection terminated.
abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (AT +cgdcont=1,"IP","gci.com","",0,0^M)
expect (OK)
^M
NO CARRIER
-- failed
Failed (NO CARRIER)
Connect script failed
Modem hangup
karlto
QUOTE(adf @ Oct 23 2006, 06:30 PM)
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP TermReq id=0x5]
LCP terminated by peer

The computer at the other end is deliberately disconnecting you (received TermReq). I am not sure if it has anything to do with the previous line or not - I wonder if that 'addr 0.0.0.0' is wrong? What settings do you have for DNS and DHCP?
adf
Interestingly, I can connect in win2k.

I'll post the win2k ipconfig aand the Z settings this evening.

My isp wants me to buy a igher speed edge account for twice the price. the gsm disconnects if the server "thinks" the connection isn't with the phone. --to put it vaguely and opaquely smile.gif. Since the win2k connection works, this shuold be surmountable.] this is why the "zaurus" line just after the chap stuff struck me as ominous..... the name is maybe triggering something?
karlto
QUOTE(adf @ Oct 24 2006, 06:06 AM)
Interestingly, I can connect in win2k.

I'll post the win2k ipconfig aand the Z settings this evening.

My isp wants me to buy a igher speed edge account for twice the price. the gsm disconnects if the server "thinks"  the connection isn't with the phone. --to put it vaguely and opaquely smile.gif.  Since the win2k connection works, this shuold be surmountable.]  this is why the "zaurus" line just after the chap stuff struck me as ominous..... the name is maybe triggering something?
*

Definitely surmountable - I just meant that it is no longer an error (you're just trying to use settings that the other server doesn't agree to). Your /etc/ppp/chap-secrets file should only need the ISP user name and password, and a * for the server:

CODE
# client server  secret     IP address
<user>   *       <pwd>

If it says 'zaurus' in there anywhere that could cause the problem, but since the output shows 'CHAP authentication succeeded', it seems like there's no problem here. You shouldn't need a 'name' entry anywhere in your config file.
adf
i have nothin at all inchap-secrets..other than the commented stuff.

The reason I think it might possibly be a name thing is based on win behaviour.

If i try from a work winxp on which I have a username, I can't log in..though the software runs, and the box sees the phone as a modem

If i try on win2k from home wher i am Administrator--everything is a snap.

I guess what I'll do is enter the ipconfig ip numbers in /peers/voq and see what happens. i thnk though that some "zaurus" hostname ifs setting off a flag at the isp-- one that accepts something windowish.....
karlto
QUOTE(adf @ Oct 24 2006, 08:39 AM)
i have nothin at all inchap-secrets..other than the commented stuff.

The reason I think it might possibly be a name thing is based on win behaviour.

If i try from a work winxp on which I have a username, I can't log in..though the software runs, and the box sees the phone as a modem

If i try on win2k from home wher i am Administrator--everything is a snap.

I guess what I'll do is enter the ipconfig  ip numbers in /peers/voq and see what happens.  i thnk though that some "zaurus" hostname ifs setting off a flag at the isp-- one that accepts something windowish.....
*

Well it says it's using CHAP, so you'll need a valid secret entry to authenticate yourself to the remote server (maybe you only have one in pap-secrets?)

PPP uses the hostname to authenticate - the end result being that basically you set this to your ISP user name, not your actual host name.
adf
which hostname, set where?
in win2k I am sending no username or password (in fact the isp instructions for things like blackberries say not to) that I know of. I thought it might be on the sim card (as you see, I don't quite get how the phone is validated.

I can tell you that I am on win2k over the phone connect rigth now, though
adf
would this be easier on a Nokia 6320? Has anyone got that combo working?
karlto
QUOTE(adf @ Oct 24 2006, 03:44 PM)
which hostname, set where? 
in win2k I am sending no username or password (in fact the isp instructions for things like blackberries say not to) that I know of. I thought it might be on the sim card (as you see, I don't quite get how the phone is validated.

I can tell you that I am on win2k over the phone connect rigth now, though
*

That's interesting - Telecom NZ has a single user name and password that must be used for all mobile phone data connections just to get connected. They still charge by your phone account.

Have you tried setting the 'noauth' option so it doesn't try to authenticate at all? I doubt this will work though as the debug output you posted clearly shows the remote server asking for a name via CHAP. I think you definitely need an entry in chap-secrets. Do you have a set of instructions for your ISP/phone (even if for Windows - it might help)?

It would appear that changing phone won't help as there are no hardware issues, just configuration.
adf
QUOTE(karlto @ Oct 24 2006, 07:43 PM)
QUOTE(adf @ Oct 24 2006, 03:44 PM)
which hostname, set where? 
in win2k I am sending no username or password (in fact the isp instructions for things like blackberries say not to) that I know of. I thought it might be on the sim card (as you see, I don't quite get how the phone is validated.

I can tell you that I am on win2k over the phone connect rigth now, though
*

That's interesting - Telecom NZ has a single user name and password that must be used for all mobile phone data connections just to get connected. They still charge by your phone account.

Have you tried setting the 'noauth' option so it doesn't try to authenticate at all? I doubt this will work though as the debug output you posted clearly shows the remote server asking for a name via CHAP. I think you definitely need an entry in chap-secrets. Do you have a set of instructions for your ISP/phone (even if for Windows - it might help)?

It would appear that changing phone won't help as there are no hardware issues, just configuration.
*


I put noauht in chap--it still passes the name Zaurus from someplace.

The isp insttructions say not to enter a username or password, and in windows, I haven't.

It seems that the question is "what is it that the windows connection is doing that the zaurus cionnection is not?" right? then what should i look for, and how? if anyone has an idea..
karlto
QUOTE(adf @ Oct 25 2006, 11:22 AM)
I put noauht in chap--it still passes the name Zaurus from someplace.

The isp insttructions say not to enter  a username or password, and in windows, I haven't.

It seems that the question is "what is it that the windows connection is doing that the zaurus cionnection is not?" right?  then what should i look for, and how? if anyone has an idea..
*

Actually the noauth option is for the remote machine - whoops. I can't see any options for not authenticating at this end...

I guess that zaurus is your actual hostname - this will be a last resort because there isn't a chap-secrets entry. I don't think that using a different phone will help because the same settings (and same remote server) apply. Maybe it is sending blank user name and password if none set in Windows.

Perhaps it isn't the auth after all then - have a look at the pppd man page (on another machine or via Google) and scan through the options you have set and what they mean. Do you have 'ms-dns' set? The zaurus seems to be asking for this just before it receives the remote term request, and you shouldn't need this (usepeerdns instead). Also perhaps try 'noip' which is supposed to help with buggy remote ipcp config...
adf
thanks... I'll tinker for a bit and post in a few days. Hopefuly with a success story, or at least useful info (besides the price and availability of a cf gsm card in the us smile.gif )

edit: a kind of off topic thought, but if i used a gsm card in my Z, then ran voip over that connection.... might it be possible to use that setup with something like vonage? ( I gather the skype thing isn't happening ) just something ai thought should be mentioned
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2014 Invision Power Services, Inc.