Help - Search - Members - Calendar
Full Version: Wireless Not Working
OESF Portables Forum > Everything Else > Archived Forums > Distros, Development, and Model Specific Forums > Zaurus Distro Support and Discussion > Angstrom & OpenZaurus
My wireless card does not seem to get recognized in the latest Hentges release.

Output of cardctl ident:

Socket 0:
product info: "AmbiCom", "WL1100C 802.11b CF-Card", "2.2"
manfid: 0xd601, 0x0002
function: 6 (network)

Output of lsmod:

Module Size Used by Not tainted
hostap_cs 55156 1 - Live 0xbf102000
hostap 111108 1 hostap_cs, Live 0xbf0e5000
ieee80211_crypt 5088 1 hostap, Live 0xbf0e2000
rfcomm 34936 0 - Live 0xbf0d8000
pxaficp_ir 8864 0 - Live 0xbf0d4000
ircomm_tty 21352 0 - Live 0xbf0cd000
ircomm 11524 1 ircomm_tty, Live 0xbf0c9000
irda 113096 3 pxaficp_ir,ircomm_tty,ircomm, Live 0xbf0ac000
ipv6 248808 10 - Live 0xbf06e000
hidp 12544 0 - Live 0xbf069000
l2cap 21028 4 rfcomm,hidp, Live 0xbf062000
bluetooth 45468 3 rfcomm,hidp,l2cap, Live 0xbf055000
snd_soc_poodle 4524 0 - Live 0xbf052000
snd_soc_pxa2xx_i2s 3608 1 snd_soc_poodle, Live 0xbf050000
snd_soc_wm8731 11344 1 snd_soc_poodle, Live 0xbf04c000
snd_soc_pxa2xx 4576 1 snd_soc_poodle, Live 0xbf049000
snd_soc_core 29908 3 snd_soc_poodle,snd_soc_wm8731,snd_soc_pxa2xx, Live 0xbf040000
snd_pcm_oss 38016 0 - Live 0xbf035000
snd_pcm 80136 3 snd_soc_pxa2xx,snd_soc_core,snd_pcm_oss, Live 0xbf020000
snd_timer 20772 1 snd_pcm, Live 0xbf019000
snd_page_alloc 5896 1 snd_pcm, Live 0xbf016000
snd_mixer_oss 14912 1 snd_pcm_oss, Live 0xbf011000
snd 45560 7 snd_soc_poodle,snd_soc_wm8731,snd_soc_core,snd_pcm_oss,snd_pcm,snd_timer,snd_mix
r_oss, Live 0xbf004000
soundcore 8356 1 snd, Live 0xbf000000

Output of dmesg:

pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
Restarting tasks... done
ieee80211_crypt: registered algorithm 'NULL'
hostap_cs: 0.4.4-kernel (Jouni Malinen <>)
hostap_cs: setting Vcc=33 (constant)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: , irq 40, io 0xc2820000-0xc282003f
hostap_cs: assuming no Primary image in flash - card initialization not completed
wifi0: test Genesis mode with HCR 0x1f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test failed, HCR 0x1f write 00 e1 a1 ff read 00 c1 a1 c1
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41
wifi0: registered netdevice wlan0
wlan0: cannot set RID fc02 (len=34) - no PRI f/w
wlan0: could not set interface UP - no PRI f/w
wlan0: cannot get RID fd41 (len=34) - no PRI f/w
wlan0: cannot get RID fd41 (len=34) - no PRI f/w
power.c: device-level power management is not supported yet

Any pointers?

That dmesg output looks scary - does that card works under other distro? Did you tried to flash it and failed?
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2018 Invision Power Services, Inc.