Help - Search - Members - Calendar
Full Version: How To Do A Pair Up With Mobile Phone
OESF Portables Forum > Everything Else > Archived Forums > Zaurus General Forums > General Support and Discussion > Security and Networking
How do the pair up FROM zaurus?? I can only do it from mobile phone, nokia 9300. I think I miss this part so that I got the following error:

My bluetooth dial-up network shows the following:
1. initializing the modem
2. connecting
3. connecting 0:00:00 [when click "I" icon, i can see the DNS server ip, but ip is 0:0:0:]
4. network disconnect

any ideas? i'm using Anycom CF BT card and the here's my Bluetooth dial-up setting
Phone: *99# or *99***1#
BT device: /dev/rfcomm0
Init string: ATZ
Speed: 115200
Hardware flow control: checked
Flow control: 30sec
Auto-detect routing: checked
Auto-detect name server: checked

abort on (NO CARRIER)
abort on (NO DIALTONE)
abort on (BUSY)
send (ATZ^M)
expect (OK)
-- got it

send (ATDT*99***1#^M)
expect (CONNECT)
-- got it

Serial connection established.
using channel 8
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x93283a54> <pcomp> <accomp>]
Timeout 0x20084bc:0x203b440 in 3 seconds.
rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
lcp_reqci: returning CONFNAK.
sent [LCP ConfNak id=0x0 <auth chap MD5>]
rcvd [LCP ConfRej id=0x1 <magic 0x93283a54> <pcomp> <accomp>]
Untimeout 0x20084bc:0x203b440.
sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
Timeout 0x20084bc:0x203b440 in 3 seconds.
rcvd [LCP ConfReq id=0x1 <auth chap MD5> <mru 1500> <asyncmap 0xa0000>]
lcp_reqci: returning CONFACK.
sent [LCP ConfAck id=0x1 <auth chap MD5> <mru 1500> <asyncmap 0xa0000>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
Untimeout 0x20084bc:0x203b440.
rcvd [CHAP Challenge id=0x0 <4953414c4956454e524f434b494e3455>, name = "Elvis"]
ChapReceiveChallenge: using 'BLUETOOTH1136121411' as remote name
sent [CHAP Response id=0x0 <f70dcb8d4fd1d650dd9948ad3304bdcf>, name = "zaurus"]
Timeout 0x200f698:0x203b710 in 3 seconds.
rcvd [CHAP Success id=0x0 ""]
Untimeout 0x200f698:0x203b710.
sent [IPCP ConfReq id=0x1 <addr> <compress VJ 0f 01> <ms-dns1> <ms-dns3>]
Timeout 0x20084bc:0x203b6a0 in 3 seconds.
sent [CCP ConfReq id=0x1 <bsd v1 15>]
Timeout 0x20084bc:0x203b7a0 in 3 seconds.
rcvd [IPCP ConfReq id=0x0 <addr>]
ipcp: returning Configure-ACK
sent [IPCP ConfAck id=0x0 <addr>]
rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 07 15 03 2f]
Untimeout 0x20084bc:0x203b7a0.
rcvd [LCP TermReq id=0x2]
LCP terminated by peer
Untimeout 0x20084bc:0x203b6a0.
CCP: Down event in state 1!
Timeout 0x20084bc:0x203b440 in 3 seconds.
sent [LCP TermAck id=0x2]
Connection terminated.
I think id depends on the version of the network applet / bluez you have on your Z
With Cacko its done from the bluetooth setup in the network wizard. using the last tab, you find the device then pair it up. Im currently using this to access this page.

If it doesnt work post up your ROM version, bluez etc
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2018 Invision Power Services, Inc.