Help - Search - Members - Calendar
Full Version: New Kernel 2.6.23.9 For C3100 And C3200
OESF Forums > Distros, Development, and Model Specific Forums > Distro Support and Discussion > Debian
2or0
I built new kernel 2.6.23.9 with some patches:
  • patched with angstrom and cpufreq
  • Patch the frequency scaling bug - touchscreen freezing
  • Add FUSE module
  • Add ip_tables related modules
  • AirGate2000C Wireless support

This kernel works for C3100 and C3200 using uboot.

Check: http://yonggun.tistory.com/60

-------------------------------------

I want to build the kernel without uboot for C3000. Can someone tell me how to make the kernel of zImage.bin like angstrom. I built zImage and changed the file name to zImage.bin. Then I tried to install it but it failed. dry.gif
scottlfa
Will there be a version like these?

kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p2
kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p1

ie one that would work with the C1000 like the ones mentioned?
2or0
QUOTE(scottlfa @ Nov 29 2007, 11:47 AM) *
Will there be a version like these?

kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p2
kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p1

ie one that would work with the C1000 like the ones mentioned?


"kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p"1 is for C1000 on SD.
scottlfa
So too is mmcblk0p2, which loads from the second partition on the SD card. Mmcblk0p1 is for the SD first partition. I have tested both on my C1k with success. I use the mmcblk0p2 atm because it works WONDERFULLY with reinstalling u-boot. I have a small 64 mb partition on mmcblk0p1 (1st partition) and the rootfs on mmcblk0p2 (2nd partition). So atm I do not need two sd cards to upgrade uboot with. Just looking for a sd version of your newer kernel, heard the mouse twitch is virtually gone on it.
flux
hello,

i want to thank you very much, 2or0, for having heard my request about ip_tables modules. I'll install it saturday (or tomorrow night). If you haven't tested yet, i'll let you know if everything is fine.
once again, thank you ! smile.gif
ZDevil
Hey, my 3200 has also just put it on! Will test it from now on and report issues here.
THANKS!
2or0
QUOTE(scottlfa @ Nov 29 2007, 05:04 PM) *
So too is mmcblk0p2, which loads from the second partition on the SD card. Mmcblk0p1 is for the SD first partition. I have tested both on my C1k with success. I use the mmcblk0p2 atm because it works WONDERFULLY with reinstalling u-boot. I have a small 64 mb partition on mmcblk0p1 (1st partition) and the rootfs on mmcblk0p2 (2nd partition). So atm I do not need two sd cards to upgrade uboot with. Just looking for a sd version of your newer kernel, heard the mouse twitch is virtually gone on it.


Yes. If you make mmcblk0p1 as vfat, then you can read and write the SD card on MS Windows series. This is the reason why I built the kernel for mmcblk0p2.
scottlfa
Indeed and thats VERY cool, just interested in seeing a;

kernel.img.2.6.23.9-yonggun-eabi-mmcblk0p2
kernel.img.2.6.23.9-yonggun-eabi-mmcblk0p1

smile.gif Btw Thanks for making these kernels I know it can be a pain smile.gif
ZDevil
And it will be super cool to have a yonggun kernel for the Cxx0 series as well. tongue.gif
My 860 doesn't mind testing and crashing because it's now resting in doggish peace.
2or0
QUOTE(scottlfa @ Nov 30 2007, 11:54 AM) *
Indeed and thats VERY cool, just interested in seeing a;

kernel.img.2.6.23.9-yonggun-eabi-mmcblk0p2
kernel.img.2.6.23.9-yonggun-eabi-mmcblk0p1

smile.gif Btw Thanks for making these kernels I know it can be a pain smile.gif


I am not sure that 2.6.23.9 works on C1000. If you can be a volunteer, I will build the kernels. dry.gif

QUOTE(ZDevil @ Nov 30 2007, 12:02 PM) *
And it will be super cool to have a yonggun kernel for the Cxx0 series as well. tongue.gif
My 860 doesn't mind testing and crashing because it's now resting in doggish peace.


Ok, I will try to build it for Cxx0. This weekend I will do it and send it to you. wink.gif
flux
Q18 of installation

excuse me to ask it, but on the wiki, it isn't quite clear...

7.2 : install kernel with : kernel.img (find on yonggun site) + autoboot.sh

at the end, upgrade kernel : use kernel.img (yonggun) + updater.sh

so, to pass from 2.6.23.1-yonggun to 2.6.23.9-yonggun, do i need "autoboot.sh", or "upgrader.sh" put on the SD with the new "kernel.img", before launching u-boot, and tell him to flash the kernel (only the kernel, not a new total install)...

scottlfa
I am certainly willing to be a guinea pig smile.gif
2or0
QUOTE(flux @ Nov 30 2007, 02:07 PM) *
Q18 of installation

excuse me to ask it, but on the wiki, it isn't quite clear...

7.2 : install kernel with : kernel.img (find on yonggun site) + autoboot.sh

at the end, upgrade kernel : use kernel.img (yonggun) + updater.sh

so, to pass from 2.6.23.1-yonggun to 2.6.23.9-yonggun, do i need "autoboot.sh", or "upgrader.sh" put on the SD with the new "kernel.img", before launching u-boot, and tell him to flash the kernel (only the kernel, not a new total install)...


You need autoboot.sh if you want to upgrade the kernel using uboot.
flux
ok, thanks smile.gif i'll let you know tomorrow about iptables and some tests smile.gif
ZDevil
One issue:

I got random internal compiler error after overclocking (624mhz). Just run make again and the process will continue. Things still build well. IIRC this does not only happen to this kernel but also in pdaXrom before (in my experience).
2or0
QUOTE(ZDevil @ Dec 1 2007, 08:51 AM) *
One issue:

I got random internal compiler error after overclocking (624mhz). Just run make again and the process will continue. Things still build well. IIRC this does not only happen to this kernel but also in pdaXrom before (in my experience).


I got the same error but I don't know the reason.
flux
2or0, the iptables seems to work well, didn't try to NAT for the moment... if problems, i'll tell you, but all seems ok. Thanks !
2or0
QUOTE(flux @ Dec 2 2007, 10:48 AM) *
2or0, the iptables seems to work well, didn't try to NAT for the moment... if problems, i'll tell you, but all seems ok. Thanks !


Thank you for your feedback.
flux
@ 2or0 :

The NAT fonction works perfectly too. sorry for the 2 weeks before telling you it, i had lots of work... Thank you smile.gif
chindi
Thank you for your work!

QUOTE(2or0 @ Nov 29 2007, 07:43 PM) *
  • patched with angstrom and cpufreq
  • Patch the frequency scaling bug - touchscreen freezing

Where I can get this patches?
2or0
QUOTE(chindi @ Jan 14 2008, 03:53 AM) *
Thank you for your work!

QUOTE(2or0 @ Nov 29 2007, 07:43 PM) *
  • patched with angstrom and cpufreq
  • Patch the frequency scaling bug - touchscreen freezing

Where I can get this patches?


Check here:
http://www.bigbridgezau.sakura.ne.jp/dev/patch/OpenZaurus/
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2014 Invision Power Services, Inc.