Help - Search - Members - Calendar
Full Version: Problem With Cacko 1.23 On The C3200
OESF Forums > Distros, Development, and Model Specific Forums > Distro Support and Discussion > Sharp ROMs
sharpman
Hello i have two problems with my zaurus.
First problem:I cleared my hdd(format,flash erase etc)Early i dont have this problem. after the instalation cacko didnt see sd card sad.gif but original rom has not this problem.
What should I do ?

Second problem:

I have this alert : HDD not initialized. I downloaded pack from trisoft , I add partitions with instruction and nothing. still this same sad.gif

my fstab from cacko:
QUOTE
Linux version 2.4.20 (maslovsky@linux) (gcc version 2.95.3 20010315 (release))
#4 Thu, 04 May 2006 23:11:42 +0400
CPU: XScale-PXA270 revision 7
Machine: SHARP Terrier
Converting old-style param struct to taglist
Ignoring unrecognised tag 0x00000000
Turbo Mode clock : 416.00MHz (*2.0, active)
Run Mode clock : 208.00MHz
System bus clock : 208.00MHz (1/1)
Memory clock : 208.00MHz (1/1)
LCD clock : 104.00MHz (1/2)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:71
68k@0k(smf),44032k@7168k(root),-(home) jffs2_orphaned_inodes=delete EQUIPMENT=5
LOGOLANG=1 DEFYEAR=2007 LOGO=1 LAUNCH=q
Console: colour dummy device 80x30
Calibrating delay loop... 415.33 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62160KB available (1980K code, 497K data, 136K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 8
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 2000210
enable_irq(120) unbalanced from c000c7d8
batok installed
Starting kswapd
Journalled Block Device driver loaded
JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communication
s AB.
Squashfs 2.2 (released 2005/07/03) © 2002-2004, 2005 Phillip Lougher
Sharp SL-Series PXA fb driver initialized.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: SHARPSL_PXAFB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 22) is a 16550A
ttyS01 at 0xf8700000x (irq = 20) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 21) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
spitz remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xxRAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Spitz audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00140000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MB 3,3V) Creating 3 MTD partitions on "NAND 128MB 3,3V":
0x00000000-0x00700000 : "smf"
0x00700000-0x03200000 : "root"
0x03200000-0x08000000 : "home"
Linux Kernel Card Services 3.1.31
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.31)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
Backlight Driver Initialized.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 381
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 136K
Trying to free nonexistent resource <f7000000-f700000f>
hda: HMS360606D5CF00, ATA DISK drive
ide0 at 0xf7000000-0xf7000007,0xf700000e on irq 136
hda: 12000556 sectors (6144 MB) w/128KiB Cache, CHS=11905/16/63
Partition check:
hda: hda1 hda2 hda3
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
hda: hda1 hda2 hda3
hda: hda1 hda2 hda3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset utf8
bvdd: Registeration is a success.
bvdd: AREA VIRTUAL PHYSICAL SIZE
bvdd: BVDD : 0xc597b000 0xa3600000 2097152
bvdd: PXAFB : 0xc3e00000 0xa3e00000 614400
bvdd: SRAM : 0xfe100000 0x5c001000 262144
hda: hda1 hda2 hda3
hda: hda1 hda2 hda3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset utf8


sry for my english:P
adf
somewhere in the debian dual boot discussions zdevil posted a simple way to keep cacko from even bothering about those sharprom partitions. Myabe you could try that and partition the drive as you see fit?
sharpman
I found this in the another topic

http://www.oesf.org/forum/index.php?act=at...ost&id=2244

I dont have /mnt/card /dev/mmcda1 ( everything is OK )

I logged as root and

mkdir /dev/mmcda1 and mount /dev/mmcda1 I saw : device or resource busy
so? :>
adf
QUOTE(sharpman @ Jul 26 2008, 02:13 AM) *
I found this in the another topic

http://www.oesf.org/forum/index.php?act=at...ost&id=2244

I dont have /mnt/card /dev/mmcda1 ( everything is OK )

I logged as root and

mkdir /dev/mmcda1 and mount /dev/mmcda1 I saw : device or resource busy
so? :>

Mounting problem I suspect. How big is the SD?
sharpman
i tested 1 and 2 gb card(witch sd updater for cacko)
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2014 Invision Power Services, Inc.