Help - Search - Members - Calendar
Full Version: Banana Pi Zero UMPC Available
OESF Portables Forum > General Forums > New products and alternatives
ArchiMark
Check out this little pocket size Banana Pi Zero with WiFi/BT, USB, 5" Display, backlit keyboard....

https://www.youtube.com/watch?v=TDwPJMnupQ8


Decided to get one for fun....

Should have it by week after next.....

tongue.gif
speculatrix
That's a pretty nice toy. I'd see if I could fit a rock64pro board when it comes out (was due first but has been delayed.
More about that board here:
https://forum.pine64.org/showthread.php?tid=5614

More about the rk3399:
http://rockchip.wikidot.com/rk3399
ArchiMark
QUOTE(speculatrix @ Mar 15 2018, 02:04 PM) *
That's a pretty nice toy. I'd see if I could fit a rock64pro board when it comes out (was due first but has been delayed.
More about that board here:
https://forum.pine64.org/showthread.php?tid=5614

More about the rk3399:
http://rockchip.wikidot.com/rk3399


Thanks...

Figure it will tide me over until my Gemini shows up....April/May, I'm guessing...

The Banana Pi board is only about 65 x 30mm....so, if the rock64pro board is much larger, it won't fit in the case....but will let the guy who's making the Banana Pi UMPC know about this....

Thanks.
speculatrix
The lower end rock64 is not huge
https://www.pine64.org/?page_id=7147

85x56 mm
ArchiMark
QUOTE(speculatrix @ Mar 15 2018, 04:22 PM) *
The lower end rock64 is not huge
https://www.pine64.org/?page_id=7147

85x56 mm


Thanks for the info....

Yes, not huge, but the Banana Pi Zero is 65 x 30 mm......

See pics of inside of UMPC......

https://www.instagram.com/puterpi/

Not much extra room with current case design....

I'll ask the maker if he could modify case to accommodate the rock64.....
speculatrix
Oh yes, on seeing the pictures, the rock64 would be too big without totally rearranging the boards inside and maybe using a smaller display controller
ArchiMark
First progress photo received of my UMPC being made.

Setup of power assembly.

Assume it will be transferred to actual case once it is finished 3D printing.

Click to view attachment
ArchiMark
Realized I haven't posted the maker, Chris Calderone's Instagram page here....

Check it out at:

PuterPi
ArchiMark
Just got another progress photo from Chris.....

Getting closer.....


tongue.gif


Click to view attachment

ArchiMark
And another progress photo from Chris....it's great that he keeps me posted on progress.

Just need to put in battery and bottom half is done except for keyboard and case piece around it....

Click to view attachment

ArchiMark
Getting close now.....

Just got latest progress photo...

Click to view attachment
ArchiMark
Got email now that my Banana Pi is fully baked and tested...

Chris is just waiting for package to arrive tomorrow with my AC charger. Will ship to me on Tuesday....So, I should have it by Friday...

In meantime, here's photo of it on....

Click to view attachment
speculatrix
It's truly a hand-crafted device. The good thing is you can upgrade whenever a more powerful computer board becomes available that will fit.
ArchiMark
QUOTE(speculatrix @ Mar 26 2018, 12:21 AM) *
It's truly a hand-crafted device. The good thing is you can upgrade whenever a more powerful computer board becomes available that will fit.


Yes, indeed....definitely not an 'off the rack suit'....and agree that at some point it's likely a more powerful board will be available....

We shall see...


Varti
Great case, and the backlit keyboard is surely a nice thing to have, one of the few things I’ll miss on my Gemini once I'll get it.

Varti
ArchiMark
Thanks, Varti....

Meanwhile....

OK, kids, I received the BP UMPC a few days ago....

Been having fun with it!

Greatly lil' pocket puter.... wink.gif

First I ran it with the Ubuntu MATE image.....worked well, but didn't have ethernet support in the image, just WiFi.

So, decided to try another image, one with armbian/Ubuntu/XFCE. Has WiFi and ethernet support.

Performance and keyboard is good and backlight is nice (can change color too...) !

Again, Chris has been great to deal with. Very responsive if I have any questions. It was only about 2 weeks from time I ordered to getting this custom made lil' bad boy....

Here's some photos for your viewing pleasure. In group photos, I've put it alongside my GPD Pocket and MacBook Pro for size comparison.

Photos include some with the different OS images.

Enjoy!

Mark






ArchiMark
And here's a few more....





speculatrix
the RockPro64 is now available (but they emphasize it's only suitable for developers at the moment)

https://www.pine64.org/?product=rockpro64-4...-board-computer


I'm pretty sure it'll be way too big to fit inside the Banana Pi case you have. I reckon it might only just squeeze into the GPD Pocket shell!
ArchiMark
QUOTE(speculatrix @ Apr 28 2018, 03:15 PM) *
the RockPro64 is now available (but they emphasize it's only suitable for developers at the moment)

https://www.pine64.org/?product=rockpro64-4...-board-computer


I'm pretty sure it'll be way too big to fit inside the Banana Pi case you have. I reckon it might only just squeeze into the GPD Pocket shell!



Yep, it is too big.....as designed right now.

speculatrix
Still using your banana-pi UMPC, or have you switched over to the Gemini?
ArchiMark
Use the Banana Pi and Pocket mostly....

This is due to the inability to connect to the guest WiFi network at my workplace. This severely limits the use of Gemini. If I don't resolve this problem soon, I will get rid of the Gemini, which would be a shame, as I like the physical form of it.

https://www.oesf.org/forum/index.php?showtopic=34952

Would be great if you could look at my thread about this problem and let me know if you have any suggestions as to resolution.

Thanks!

Mark
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2019 Invision Power Services, Inc.