Help - Search - Members - Calendar
Full Version: Hardware problems with pdaXrom..
OESF Forums > Distros, Development, and Model Specific Forums > Distro Support and Discussion > pdaXrom
Pages: 1, 2
Laze
Do you have a piece of hardware thats not working under pdaXrom like a CF network card, USB controller etc?

Please post your cardctl ident and cardctl status and all other info you can find about the card (links to drivers etc.) - then we will try and fix them one at a time and try and make sure that pdaXrom supports as many accessories as possible.

We will probally be holding an IRC meeting with all user who are having problems with hardware but this is meant to be a warm up to see how many problems there are and how much time it will take to fix them.
w14
Laze,

There are a few people on these boards that use cheap and nasty Zonet ZCF1100 wireless cards, including me.

I added the following to /etc/pcmcia/hermes.conf to make it work:

card "Zonet ZCF1100"
manfid 0x000b, 0x7100
bind "orinoco_cs"

Cheers,

Mike.
ScottYelich
Laze --

did you fix the cell modem that my friend has -- I think we sent you the info
before. we/he said that we/he were willing to donate/pay $100 for this
card to work.

Scott
sigmaX
I already talked in irc to sashz and sent him an email with cardctl ident and info ... but anyway, in order to get also the info in here, I post:

CARD: Ambicom CF Bluetooth model BT2000CF

cardctl ident:

Socket 0:
product info: "AmbiCom BT2000C", "Bluetooth PC/CF Card", "", ""
manfid: 0x022d, 0x2000
function: 2 (serial)
Socket 1:
no product info available

cardctl info:

PRODID_1="AmbiCom BT2000C"
PRODID_2="Bluetooth PC/CF Card"
PRODID_3=""
PRODID_4=""
MANFID=022d,2000
FUNCID=2
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255
deniscallies
Hey
has somebody any experiences with the audiovox RTM 8000 and RC8?

Just want it to call friends and surf over GPRS

Thanks

Denis
cnorwood19
QUOTE(deniscallies @ Dec 28 2004, 09:44 PM)
Hey
has somebody any experiences with the audiovox RTM 8000 and RC8?

Just want it to call friends and surf over GPRS

Thanks

Denis

I just tried the instrutions here:

http://www.oesf.org/forums/inde...ic=1382&hl=gprs

I had the bad vcc error at first, just like he/she did.

Then I downloaded the sample scripts and edited it for my provider, using vi

tried to connect, but had output of:

defining PDP context...
Connect script failed


So, since i really dont know anything but how to follow instructions, I am at a loss.



I think Laze said there would be a how-to with this card sometime after RC8 release. I guess we wait!
g33k
Since you've started a thread specifically for this purpose, I'll repost this stuff...

To enable the Symbol LA-4137 "Wireless Networker" wifi card, add the following lines to /etc/pcmcia/spectrum.conf:

CODE
card "LA4137 Spectrum24 CF WLAN CARD"
manfid 0x014d, 0x0001
bind "spectrum_cs"


For the TRENDnet TE-CF100 wired fast ethernet card, add the following lines to /etc/pcmcia/config:

CODE
card "TRENDnet TE-CF100"
manfid 0x0149, 0xc1ab
bind "pcnet_cs"


When I insert my RATOC CFU-1, "cardctl ident" returns

CODE
Socket 0:
 product info: "RACTOC",  "USB HOST CF+ Card"
 manfid: 0xc015, 0x0001
 function: 11  (ident)


"cardctl status" returns

CODE
Socket 0:
 3.3V 16-bit PC Card
 function 0: [ready]


Driver source code for the CFU-1 is here:
http://www.paipai.org/~humorum/zaurus/cfu1..._0.0.2-3.tar.gz

C7x0/C860 patch for USB keyboard mappings:
http://www.paipai.org/~humorum/zaurus/usbk...lc-0.2.patch.gz
cs_jacky
QUOTE(cnorwood19 @ Dec 29 2004, 07:08 AM)
QUOTE(deniscallies @ Dec 28 2004, 09:44 PM)
Hey
has somebody any experiences with the audiovox RTM 8000 and RC8?

Just  want it to call friends and surf over GPRS

Thanks

Denis

I just tried the instrutions here:

http://www.oesf.org/forums/inde...ic=1382&hl=gprs

I had the bad vcc error at first, just like he/she did.

Then I downloaded the sample scripts and edited it for my provider, using vi

tried to connect, but had output of:

defining PDP context...
Connect script failed


So, since i really dont know anything but how to follow instructions, I am at a loss.



I think Laze said there would be a how-to with this card sometime after RC8 release. I guess we wait!

The card works. After follow the instruction in the thread, run the following commands:
  • cardctrl suspend
  • cardctrl resume
Connect to GPRS. It works.

Jacky
cnorwood19
My card is ready, and the cardctl suspend then resume doesnt work.

When dialing I get, /usr/sbin/ppd: unrecongnized option"

and cardctl config gives me Vcc and a large string of #s

Ill just redo the whole process to make sure everythink is right.

Good to know it is working for others!
Vanguard
How about the pocketop IR keyboard?

What can I do to help someone get some working drivers going?
mike151
Hi,

I have an 'Eagletec' CF wireless card that is partially working
# cardctl info
PRODID_1="Wireless"
PRODID_2="LAN Adapter"
PRODID_3="Version 01.02"
PRODID_4=""
MANFID=0156,0002
FUNCTID=6
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCIF=255

# iwconfig eth0
shows proper ESSID, Mode, Frequency and Encryption Key.

# ifconfig eth0
shows proper static ip and dns data

# route -vn
shows my liksys AP ip address as the gateway

ping my C860 by its fixed IP address is ok

Everything seems perfect, BUT...

ping my AP or other PCs in my home network losses all packages.

What could be wrong here?

Thanks!

Mike
Martin
Problem with Netgear MA701 Wireless 802.11b CF card

thx to pdaXrom team for great work on RC8

Martin

===================================================================

OUTPUT: cardctl ident
---------------------

Socket 0:
product info: "NETGEAR", "MA701 Wireless CF Card", ""
manfid: 0xd601, 0x0002
function: 6 (network)
Socket 1:
no product info available
===================================================================

OUTPUT: cardctl status
----------------------

Socket 0:
3.3V 16-bit PC Card [suspended]
Socket 1:
no card

===================================================================

NETGEAR MA701 Wireless CF Card 802.11b

MANID / PRODID : d601 / 0002

===================================================================

Recognized by CF/SD Card applet as

Ambicom WL1100C 11Mbs Card 802.11b
...

===================================================================

OUTPUT: cardctl info
--------------------

PRODID_1="NETGEAR"
PRODID_2="MA701 Wireless CF Card"
PRODID_3=""
PRODID_4=""
MANFID=d601,0002
FUNCID=6
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255

===================================================================
Laze
Martin what is the problem - tried updating as described in the Kathrin RC8 is out and please try setting the wireless options in wireless config tool. It should work with your card,
webslngr
another CF Lan card to add to the list:
Hawking 10/100 CF Fast Ethernet
I got it working by adding the following to the /etc/pcmcia/config
CODE
card "Fast Ethernet"
manfid 0x0149, 0xc1ab
bind "pcnet_cs"

Thanks for all the hard work on the rom!
--webslngr
jasonakay
My Billionton CFLA-100N 10/100 FastEthernet Compact Flash LAN Adapter doesn't work 'out of the box'.

I add the following to /etc/pcmcia/config:

CODE
card "Billionton CFLA-100N 10/100 FastEthernet"
version "CF", "100Base-Ethernet", "V", "1.0"
manfid 0x021b, 0x0202
bind "pcnet_cs"


Thanks! You guys are doing a FANTASTIC job of pdaXrom!! smile.gif

Jason.
shula
it's *not exactly* a hardware problem, but IMHO it kind of fits here:

SYNC on SD card issue:

after writing files to my SD card, i plugged it in the desktop, and NADA: file is not there. returned the SD to the zaurus, and the file IS there.

it's probably a "sync/cache" issue.
the workaround is to run "sync" before i take out the card from the Z.

this behaviour didnt exist on my previous rom (cacko 1.21b)
rgrep
You are unmounting the card before you remove it, right? smile.gif You could test whether it's a problem with the eject applet by typing 'mount' in a terminal after telling the applet to eject it. If you see it still listed as mounted then some process may still be using the card. You can eject it manually by typing '/etc/sdcontrol eject' but you will still get the "device is busy" error if a process has a file open on your card. To find out which processes are using your card just type:
CODE
fuser -vm /mnt/card

or to see more of each process's command line:
CODE
ps | grep $(fuser -m /mnt/card | tr -s " " | sed 's/ / -e /g' | cut -d" " -f2-)

Matt
rgrep
If you mount filesystems from your SD card through the loopback device (e.g. cramfs filesystems like the SDK) then even after unmounting them you still won't be able to eject your card ("umount /mnt/card: device is busy"), and "fuser -m /mnt/card" won't list any processes. If you type "ps | grep loop" you'll see a line like this:
CODE
15368 root            SW< [loop0]

To unlink the loop device just type:
CODE
losetup -d /dev/loop0

Do that for each loop device listed in the ps output. The umount command is actually supposed to do this for you when you unmount a loopbacked filesystem but for some reason the pdaXrom version doesn't.
shula
no, i'm too lazy to umount it.
usually i just wait 3-5 seconds after file op is finished, and i eject the card.
as i noted before, it wokred in cacko without the need to umount (which is what i call "real hot-swap" ;-))

thanks for your advices.
rgrep
I wouldn't call it a bug if you're doing something no one would ever recommend. smile.gif pdaXrom has synchronous I/O disabled in the kernel (CONFIG_FS_SYNC), do you know if Cacko 1.21b does as well? If not then that would explain why you're able to remove the card after such a short time without doing a manual sync.
sigmaX
I installed SAMBA server (2.2.9) and now when rebooting, I am getting the following error repeated on the output screen:

eth0: Error -110 writing Tx descriptor to BAP

I disconnect the Orinocco based wifi card and it stops...

I get login and log in uneventfully. I can Plug again the card, and I got internet access...

but NO SAMBA SHARES...

I found this link:

http://www.uwsg.iu.edu/hypermail/linux/ker...412.1/0329.html

Which talks about same error ... is this MY problem or is it some kind of incompatibility / inconsistency between Kernel and compiled samba version AND orinocco cards ?

Regards
jasonakay
I have a GlobalSat BC-307 Compact Flash GPS receiver that doesn't work 'out of the box'.

I add the following to /etc/pcmcia/config:

CODE
card "GlobalSat BC-307 GPS"
 manfid 0x0279, 0x950b
 bind "serial_cs"


Thanks!!

Jason.
ScottYelich
QUOTE(shula @ Jan 2 2005, 10:27 AM)
no, i'm too lazy to umount it.
usually i just wait 3-5 seconds after file op is finished, and i eject the card.
as i noted before, it wokred in cacko without the need to umount (which is what i call "real hot-swap" ;-))

thanks for your advices.


hehe... my battery on my laptop gives me 0 seconds... so my shutdown
for freebsd was "sync;sync" and pull the power. I never had any
corruption :->

Scott
nightfire
I think the socketcom firmware in the spectrum24 driver is old.. my locally compiled driver works ok (under my own kernel), but the one with 1.1.0-rc8 seems to overdrive the antenna or something. Oddly, cupping my hand over the antenna seems to improve the signal quality. smile.gif Quite strange.

Anyway, I attached my spectrum_fw.h generated from the latest firmware on Socket's web site. Can you check if it differs, and if so, recompile the driver against rc8's kernel? Alternatively, could you post your kernel source? tongue.gif

Thanks!
nightfire
Also, in case my patch was corrupted by the description field on bug ID 245, here's a binary.
gene
Guys,

I know it listed as fixed for RC8, but it isn't working for me. That is revision B of Socket 6004 card.

I added the following entry in /etc/pcmcia/spectrum.com:

CODE
card "Socket Communications CF+ LP WLAN Card Rev B"
 manfid 0x0156, 0x0003
 bind "spectrum_cs"


Now it appears like its tyring to work and dmesg spits out the following:

CODE
spectrum_cs.c 0.4.2 (Pavel Roskin <proski@gnu.org> and others)
orinoco_lock() called with hw_unavailable (dev=c346c000)
orinoco_lock() called with hw_unavailable (dev=c346c000)
spectrum_cs: primary firmware download failed
spectrum_cs: firmware download failed
eth0: Station identity 0015:0002:0001:000a
eth0: Looks like an Intersil firmware version 1.10.2
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: failed to read MAC address!
spectrum_cs: register_netdev() failed



Any and all help would be more than welcome and very much appreciated!!!
Mickeyl
6004 B is not a prism2.5 card, there's no way you will get spectrum_cs work with it.
It's based on Agere HERMES II design. Someone added their drivers to OE, so you could try to build and run these.
samxiao
anyone brings Pocketop keyboard works in X11 ROM?
Re@lity
Senao NL-2511 CF Mercury (prism3 card afaik)

Cardctl:

Socket 0:

product info: "wlan", "11Mbps_PC_Card_3.0", "ISL37100P", "Eval-RevA"

manfid: 0x000b, 0x7100

function: 6 (network)


It would be great to get this card running with the HostAP drivers, preferably!
I'm new here, so please forgive if this has been covered already! (a link would be nice though, in that case!)
AlexBeaudion
My linksys PKW-WCF12 has a problem, I have no issues connecting to a 802.11b base station, but as soon as I try to connect to a 802.11g station the card refuses to connect (even at .b speeds), other cards in laptops and the like have no problems at all.

Am I using the correct drivers? does anyone else have this problem?? Any quick fixes??

Thx,
Alex

The error that I get is:
cardmgr[130]: socket 0: Linksys CompatfFlash Wireless Card
cardmgr[130]: executing: './hermes start eth0 2>&1'
cardmgr[130]: + Error for wireless request "Set Frequency" (8B04) :
cardmgr[130]: + SET failed on device eth0 ; Operation not supported.
or
cardmgr[130]: socket 0: Linksys CompatfFlash Wireless Card
cardmgr[130]: executing: './hermes start eth0 2>&1'
cardmgr[130]: + Error for wireless request "Set Frequency" (8B04) :
cardmgr[130]: + SET failed on device eth0 ; Invalid argument.
(depending on mood it seems)

cardctl ident:
Socket 0:
product info: "Linksys", "Wireless CompactFlash Card", "", ""
manfid: 0x028a, 0x0673
function: 6 (network)
Socket 1:
no product info available

cardctl info:
PRODID_1="Linksys"
PRODID_2="Wireless CompactFlash Card"
PRODID_3=""
PRODID_4=""
MANFID=028a,0673
FUNCID=2
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255

lsmod:
orinco_cs
orinco
hermes
pxa_bi
storage_fd
usbdcore
usbdmonitor
sharp_mmcsd_m
rgrep
QUOTE(AlexBeaudion @ Feb 25 2005, 06:24 AM)
My linksys PKW-WCF12 has a problem, I have no issues connecting to a 802.11b base station, but as soon as I try to connect to a 802.11g station the card refuses to connect (even at .b speeds), other cards in laptops and the like have no problems at all.

Am I using the correct drivers? does anyone else have this problem?? Any quick fixes??


Hi Alex,

You could try changing drivers from orinoco to hostap. I also have a Linksys WCF12 and have noticed my card behaves much better under hostap. See this post for instructions on changing drivers.

Hope this helps.

Matt
wowo123
I would like to use my Belkin-BT-Card F8T020, which works great with cacko-ROM.
With pdaxrom it is't recognized.
It says:

product info: "CF CARD", "GENERIC", "", ""
manfid: 0x0279, 0x950b
function: 2 (serial)

Would be nice to have it with pdaxrom too.
Wolfie_Fox
I found that after re flashing from RC8 to RC9 that my Bluetooth card stopped working, I don't remember the exact problem as I am back on RC8 now, also every time I try to put my Zaurus into standby with the Bluetooth card in the PDA just crashes and I end up having to take the battery out to restart it sad.gif

(Had to edit this as I forgot to mention my Bluetooth card make...)
It is a Armadillo Bluetooth CF Card V1.1. Model no: LSE039/4 R1D Type: LSE039

Thaks all I know about my BT card dry.gif

That's one problem I'm having...

The other is with the USB data cable, when I set the USB settings so it will let my comp access the SD slot I keep getting my comp telling me that even when I have a card in the SD slot it says "There is no disk in the drive" The Zaurus shows up in My Computer as a new removable drive but it just will not work. It has never worked since the feature was added. Do I need to install some special driver for my Zaurus on to my comp which runs XP Pro SP 2 instead of it using the generic driver that XP installs the second you connect the Z for the first time?

Apart from that I'm really happy with RC8, don't know about RC9 as I used it for only 10 mins before going back to 8, waiting for RC10 now tongue.gif

One more thing that probably isn't related to the OS but... then I install the WiFi scanner from the IPK feed it doesn't give me an icon anywhere to let me use the program and I have no idea where it is installed, I have that prob with a few of the programs that I install.

One last thing... The PPP thing for accessing the internet only lets me dial a phone number, it there not a way I can get my Z to connect to my phone and connect to the internet via GPRS so that I don't have to pay for the duration that I am online, just pay for the amount of data transferred.

Thanks in advance biggrin.gif
omega
Wolfie_FOX, regarding gprs... It is the same settings for ppp to use gprs over ir to phone you just put in a different dialing number... it's like #99 or something...
azalin
I hope this is the right thread to post in, but I think this is some nice info on getting support for the only 802.11g network card currently on the market (this is nice so hotspots won't get slower because a 802.11b card connects or on hotspots which are 802.11g (+WPA or WEP) exclusively).

Card name: Linksys WCF54G Wireless Compact Flash
Chipset: likely the Hermes II.5 chip (WL60040) (or possibly Hermes II chip (WL60010)?)
Drivers source: http://www.agere.com/mobility/wireless_lan_drivers.html
(Pick the 7.22 version drivers, does not support older chips anymore but it reportedly supports this chip).
Review of the card: http://www.tomsnetworking.com/Reviews-177-ProdID-WCF54G.php
Possible problems: Driver is kernel 2.4 only, driver reportedly
works on x86, so far only a report of crashes on Xscale (Zaurus Cacko).
Driver download extras: HCF directory contains firmware images to allow the card to operate in either station (STA) or Access Point (AP) mode.

Check also the following threads (I tried to make a summary of the info in this post).
http://www.oesf.org/forums/index.php?showtopic=11082&st=15
http://www.oesf.org/forums/index.php?showtopic=8469
Quino
There is a popular wireless CF card which isn't supported by pdaXrom, at least, I thought it was very popular and therefore I bought it.

SMC2642 EZ Connect 2642W

This card is recognized either as "anonymus memory" or as Sandisk connect SDWCFB-000".

#cardctl info
PRODID_1 = " " (yes one space)
PRODID_2 = "SMC2642W 11Mbps Wireless CF Card"
PRODID_3 = ""
PRODID_4 = ""
MANFID=d601, 0005
FUNCID=6

#cardctl ident 0
Product info: " ", "SMC2642W 11Mbps Wireless CF Card", ""
manfid: 0x601, 0x0005
function: 6(network)

Other ROMS support this card according what I read in these forums. Would you add support to this card?. I tried all kind of configurations in the /etc/pcmcia files, but now I'm clueless.
sandmansandine
I'm having a really hard time with my Planex GW-CF11X, can't find anything that'll do the trick

SL-C1000
PDAxRoom 10.4
Planex GW-CF11X
miskinis
SL-6000 - builtin MIC does not work, bundled oss mixer won't even start
adf
6000 (probably other too for some of this)

USB keyboard map incomplete--no punctuation, that sort of thing

IR Keyboard Belkin f8u1500 Doesn't work

Sharp CF camera

Maybe publish a list of usb Bluetooth dongles? I have one that doesn't work, but it might be easier just to find ones that do.

USB GPS?? I don't have one atm, but I haven't seen reports of their use (could be me).

USB cameras via V4L support in the kernel?

On the 6k
Power button doesn't suspend
ctrl/alt does nothing
"special keys" Mail home menu, etc do nothing
Record button does nothing.
Suspend/resume while wireless is on brings back a "dead" connection (light is on , no data will transfer)

And.. something that doesn't work on any rom that I have seen, but seems wanted: 2gig sd... or at least 2 gig mmc (which I think hasn't been tested)
dominate
hi all.... just running pdaxrom after playing around with the sharp rom and openzaurus opie and gpe distros for a while.... i can't believe how sweet pdaXrom is! exactly what i want!

anyway, back on topic... i have the ambicom wl1100c-cf wireless card... it works very sporadically in pdaXrom, although always worked perfectly in the others... what am i missing? it has worked for me a couple times, but even then droped and reconnected quite a bit. Other times, i can't even get it to connect to my network.

I've read a bunch of the discussion on using hostap drivers, but i'm confused... i don't have ANY wireless drivers in lsmod (at least when it's not working), and only a couple even installed in the modules directory, so i'm assuming most are built in. also, my card shows up as eth0 not wlan0.

What am i missing?

thanks!
ken
Hrw
QUOTE(w14 @ Dec 28 2004, 05:21 PM)
There are a few people on these boards that use cheap and nasty Zonet ZCF1100 wireless cards, including me.

I added the following to /etc/pcmcia/hermes.conf to make it work:

card "Zonet ZCF1100"
  manfid 0x000b, 0x7100
  bind "orinoco_cs"
*


That card has few other names (atleast manfid says so). In OpenZaurus they are handled by hostap_cs:
CODE
card "SonicWALL Long Range Wireless Card"
  version "SonicWALL", "Long Range Wireless Card", "ISL37100P", "1.0"
  manfid 0x000b, 0x7100
  bind "hostap_cs"

card "Senao NL-2011CD PLUS Ext2 Mercury"
  version "WLAN", "11Mbps_PC-Card_3.0", "ISL37100P", "Eval-RevA"
  manfid 0x000b, 0x7100
  bind "hostap_cs"

card "Senao/Origo 80211b WLAN Card"
  manfid 0x000b,0x7100
  bind "hostap_cs"
Hrw
QUOTE(mike151 @ Dec 29 2004, 08:33 PM)
I have an 'Eagletec' CF wireless card that is partially working
# cardctl info
PRODID_1="Wireless"
PRODID_2="LAN Adapter"
PRODID_3="Version 01.02"
PRODID_4=""
MANFID=0156,0002

*


It's prism2 based card - use hostap_cs or orinoco_cs for it. It was released by many manufacturers and IIRC it is based on Intersil reference card.
Hrw
QUOTE(sigmaX @ Dec 28 2004, 06:08 PM)
Socket 0:
  product info: "AmbiCom BT2000C", "Bluetooth PC/CF Card", "", ""
  manfid: 0x022d, 0x2000
  function: 2 (serial)

*


Add that into /etc/pcmcia/config:
CODE
card "AmbiCom BT2000C Bluetooth PC/CF Card"
 version "AmbiCom BT2000C", "Bluetooth PC/CF Card"
 bind "serial_cs" class "bluetooth"


thats how it is setup in OZ - I dont know does it works or not.
trichmon
apmsleep does not seem to work correctly on the 6000. It suspends but does not resume. Cant seem to right click (even after reading other threads). Windows still open like they are on a clamshell (have not looked for a fix).

Wireless works like rc10, it *seems* faster to me, even firefox seems to open faster. All in all a fairly large step in stability and speed. If apmsleep worked and I could script up alarms, pdaxrom would be 100% usable for me.

Great Job!!
YOSSIE
wlan-ng ipk in feed of rc11 (http://212.10.30.205/rc11/Zaurus-C1000-C3100/feed/wlan-ng_0.2.1-pre26-1_armv5tel.ipk) does not seem to contain prism2_cs.o.

I am going to use PLANEX GW-CF11X on C1000 and rc11. How can I use this card on rc11?
Hrw
yossie: with hostap maybe? Atleast this is what I will try for prism2 cards.
sleepy
I apologize for the somewhat redundant post in the "rc 12" topic but this topic seemed more suitable...

Anyhow, I'm using rc12 with a C1000 and while a USB mouse works fine trying to use a USB keyboard is a no-go. Switching USB function to "serial" causes the built-in keyboard to stop working (touch screen works fine) and no keypresses from the USB keyboard are registered. Unplugging the keyboard and switching the USB function back to "storage" freezes up the system.

I've tried both a Fellowes "stowaway keyboard" as well as a standard mac usb keyboard.

Any ideas?
MONVMENTVM
how do you use the usb mouse? i just plugged it in but nothing happens... dmesg says something about usb device not activated.

using rc12 on c3100
sleepy
QUOTE(MONVMENTVM @ Oct 13 2005, 05:57 AM)
how do you use the usb mouse? i just plugged it in but nothing happens... dmesg says something about usb device not activated.

using rc12 on c3100
*


I just plugged it in and dmesg picks it up properly. After that I open up the "USB Function" app and switch to "serial" mode and it just works. I don't know if it matters but this is with a Kensington Orbit two button trackball.

I'm also using a C1000 so perhaps this is C3100 specific. Did you upgrade from rc11 or was this a freshly flashed rc12?
MONVMENTVM
was a fresh rc12. there shouldnt be any difference between the c3100 and the c1000... if you look rc12 is the same rom for both devices.

do you have /proc/bus/usb ? i saw that some usb functions need it (lsusb needs it... and also usbh!). but i dont have it.

i also tested with the DM-menu. under "test mouse" it said to connect the mouse (which i did); then the lights of the mouse appeared and it said that the mouse is ok and working... so the hardware should be ok. i think that i dont have some files...

i also plugged in a card reader... but nothing happens.

dmesg says the following (just the things wich sound interesting for me):
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
//this line is written very often... about 20 to 30 times
SD Driver Initialized.
sharp_mmcsd 0.30 13 Oct 2004
pxa_sd_wait_id_response: responce time out (cmd=52 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=05 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=55 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=41 MMC_STAT=0x2142)
[SD]-clustersize = 800
.....
...
Trying to free nonexistent resource <f7000000-f700000f>
...
...
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_conected: 0
usbh: monitor_unload: 0
usbh: monitor_hotplug: agend: usbh interface: monitor action: unload
usbh: monitor_request_irq: 41 71
usbh: monitor_modinit: finished
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 4
usbdcore: usbdcore 0.1 blablablabla (dbg=" ")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
udc_connect: usb-device is not active.
monitor_modinit: finished
...
...
start check battery !
mice: PS/2 mouse device common for all mice
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2014 Invision Power Services, Inc.